America Makes and ANSI Launch Additive Manufacturing Standardization Collaborative
America Makes, the National Additive Manufacturing Innovation Institute, and the American National Standards Institute (ANSI) today announced the launch of the America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC). The purpose of the AMSC will be to coordinate and accelerate the development of industry-wide additive manufacturing standards and specifications consistent with stakeholder needs and thereby facilitate the growth of the additive manufacturing industry. Participation is open to any interested person.Â
The catalyst for the AMSC is the fact that a number of standards developing organizations are engaged in standards-setting for various aspects of additive manufacturing, prompting the need for coordination to maintain a consistent, harmonized, and non-contradictory set of additive manufacturing standards. Â Full Press Release:
Â
High-Tech Manufacturing Jobs - Battery Manufacturing in America
We believe advanced manufacturing provides the opportunity for more productivity, cost savings and improved energy efficient production thus allowing companies to be more competitive right here in the USA.
Factory Automation in India
Automation plays a crucial role in increasing the production and profit for the company.
Nanolights
From Nature.com:
Ultimately, Goh, a PhD candidate at the National University of Singapore, hopes that the method will help her to find blood vessels that are leaking owing to inflammation, perhaps helping to detect malaria or predict strokes. Crucial to her technique are the virus-sized particles that give the solution its colour. Just a few tens of nanometres across, they are among a growing array of 'nanolights' that researchers are tailoring to specific types of fluorescence: the ability to absorb light at one wavelength and re-emit it at another.
Many naturally occurring compounds can do this, from jellyfish proteins to some rare-earth compounds. But nanolights tend to be much more stable, versatile and easier to prepare — which makes them attractive for users in both industry and academia.
The best-established examples are quantum dots: tiny flecks of semiconductor that are prized for their beautiful, crisp colours. Now, however, other types of nanolight are on the rise. Some have a rare ability to absorb lots of low-energy photons and combine the energy into a handful of high-energy photons — a trick that opens up opportunities such as producing multiple colours at once. Others are made from polymers or small organic molecules. These are less toxic than quantum dots and often outshine them — much to the amazement of chemists, who are used to carbon-based compounds simply degrading in the presence of ultraviolet light... ( full article )
Bosch combines "Industrie 4.0" platform and Industrial Internet Consortium standards
Connected industry is now becoming an international reality. In a new project, Bosch is working together with partners to combine the technical standards of Germany’s “Industrie 4.0” platform and of the Industrial Internet Consortium (IIC) for the first time. This combination of the two approaches allows the exchange of data between central areas of connected industry. “Industry 4.0 is not so much a national as an international issue. Only a truly global approach – without competing company standards or differing national regulations – will allow it to develop to its full potential,” said Dr. Werner Struth, a member of the Bosch management board, at the Bosch ConnectedWorld IoT conference in Berlin. To date, the lack of a common language has hindered the smooth international coordination of manufacturing, logistics, and building and energy management. “As we head towards connected industry, two worlds are now coming together. This is a major advance. A combination of these two standards paves the way for numerous new cross-border business opportunities for Industry 4.0 solutions, both for Bosch and for other international companies,” Struth said. Full Press Release:
Linear Servo Solution Conquers Traditional Inaccuracies, Delivering Impressive Throughput And Increased Flexibility
SP Technology has leveraged the impressive capabilities of the Beckhoff XTS Continuous Linear Servo System to create a machine that combines speed, accuracy, flexibility and a reduced footprint.
4D-Printed Concept Car Will Predict Your Wishes
Viknesh Vijayenthiran for Discovery News: New materials will also play a significant role in the further evolution of the car, according to BMW. This has already started with the increasing use of carbon fiber and other composites instead of conventional steel.
Looking further forward, technologies such as rapid manufacturing and 4-D printing (3D-printed materials that change depending on conditions) will open up new possibilities.
One of the more interesting aspects of the concept is a technology called Alive Geometry which consists of 4D-printed components that can change their shape and interact with the driver. Full Article:
Plattform Industrie 4.0 and Industrial Internet Consortium Agree on Cooperation
Representatives of Plattform Industrie 4.0 and the Industrial Internet Consortium met in Zurich, Switzerland to explore the potential alignment of their two architecture efforts - respectively, the Reference Architecture Model for Industrie 4.0 (RAMI4.0) and the Industrial Internet Reference Architecture (IIRA). The meeting was a success, with a common recognition of the complementary nature of the two models, an initial draft mapping showing the direct relationships between elements of the models, and a clear roadmap to ensure future interoperability. Additional possible topics included collaboration in the areas of IIC Testbeds and I4.0 Test Facility Infrastructures, as well as standardization, architectures & business outcomes in the Industrial Internet.
State Secretary, Matthias Machnig, Ministry for Economic Affairs and Energy: “We welcome the cooperation of both initiatives as an important milestone in the cooperation of companies internationally. The combined strengths of both IIC and Plattform Industrie 4.0 will substantially help to pave the way for a mutually beneficial development of a digitized economy for our international businesses.”
Prof. Dr. Siegfried Russwurm, Technical Director of Plattform Industrie 4.0, CTO and Member of the Managing Board of Siemens AG, said„Collaborating with other initiatives is important, especially for Germany’s export-oriented economy. We are highly interested to cooperate intensively with others in order to pave the way for global standards. Cooperating with IIC – and with other consortia – is an important step in the right direction.” Full Press Release:
Mobile Robotic Fabrication System for Filament Structures
The project Mobile Robotic Fabrication System for Filament Structures, developed by ITECH graduate Maria Yablonina, demonstrates a new production process for filament structures. It proposes multiple semi-autonomous wall climbing robots to distribute fiber filament, using any horizontal or vertical surface, or even existing architecture, to support the new structures. Compared to larger scale industrial robots that are limited by position and reach, these robots are enabled with movement systems and a collection of sensors that allow them to travel and interact accurately along typical ground, walls, roofs, and ceilings. One can imagine a fabrication process where an operator arrives to the scene with a suitcase housing all the necessary robots and materials to create a large structure. These agile mobile robotic systems move robotic fabrication processes beyond the constraints of the production hall, exposing vast urban and interior environments as potential fabrication sites.
Patent Deployment in Smart Manufacturing
Since fewer companies have applied smart manufacturing patents in chemical, food, biotechnology, mechanical, transport, and machine tools industries, these sectors are relatively uncontested for perspective vendors.
2016: Why Manufacturers Should Embrace Real-Time Data
New technologies such as IoT attract the best minds in business, but also a lot of unproven and even untested ideas. Proceed with care.
Automotive Industry 4.0 - Disrupting the Industry?
Pascal Drescher for The Market Mogul: We all know what happened to Nokia and Motorola around a decade ago – are BMW, GM and Toyota the next to get disrupted?
The automotive industry developed on an evolutionary path after Henry Ford’s game-changing introduction moving assembly line over a century ago, but the industry might soon get disrupted once more.
There are currently several catalysts, rooted in technological advancements as well as in changes in consumer behaviours such as more and more powerful batteries and growing interest in environmentally friendly fuels, or self-driving vehicles. Furthermore, the sharing economy has reached the automotive industry with different services such as BMW’s DriveNow or autolib in Paris. Tesla is so far the most successful new entrant that took advantage of some those developments, but other companies from the Silicon Valley might put an even higher threat to established manufacturers such as BMW, Toyota or GM. What is likely to be the next big thing is the move towards automotive industry 4.0, that is marked by the convergence of automotive, technology and telecommunication industry, according to a Roland Berger study. The automotive industry is not the first to face such disruption, thinking about how iTunes revolutionised the music industry, or how Apple and Samsung with their Smartphones remodelled the telecom industry while previously leading companies such as Nokia had to face bankruptcy. And when thinking of technology and telecommunication, it is clear that it will be once more tech giants Apple and Google who are only waiting to jump into the market, leveraging their massive technological knowledge and financial base. As it is known, both already highly invested in developing self-driving vehicles, Apple under its “Project Titan” and Google’s autonomous vehicles are already driving through California. Cont'd...
3D Printing - Is this the Next Wave of Technology?
Like a superstrong magnet, 3D printing will pull manufacturing away from the manufacturing hubs and redistribute it, product by product, among thousands or tens of thousands of smaller factories across the globe.
Boomers at Work: Retirement vs. Working … It's Complicated
A lot of really smart people in technology took Confucius advice, "Choose a job you love and you will never have to work a day in your life."
A New Boeing Patent Describes Levitating 3D Printing
By Lindsey Kratochwill for Popular Science: Watching a 3D printer work can sometimes seem like magic--thin filaments slowly build up on top of a platform, turning into parts and figurines. Now, apatent published by aerospace company Boeing introduces an even more futuristic element: levitation.
With this method, the object prints while floating in midair thanks to magnets or acoustic waves. A "nugget" or base gets printed first out into space, and then a cadre of 3D printers add more and more of the printing material.
But why? Levitation is cool, yes, but it turns out there is also a practical purpose for a floating 3D printed object, at least according to Boeing's patent. The levitating object can be manipulated and turned more so than an object stuck to a platform can be, and using many printheads at the same time would ostensibly speed up the process. Cont'd...
Records 1231 to 1245 of 1446
First | Previous | Next | Last
Featured Product
A Data Science Platform for Manufacturing
RapidMiner offers a data science platform that's built to enable people of all skill levels across the enterprise to quickly build and operate AI solutions to drive hard ROI for their organizations. Many data science tools are built to create accurate models, but cannot help manage the models into production, where they can have an impact. The platform covers the full lifecycle of the AI production process from data exploration and data prep to model building, model deployment and model operations. RapidMiner can help with a wealth of manufacturing use cases, like designing smart products, running smart factories, forecasting demand, ensuring quality, reducing production downtime, and managing supply chain risk.
