Low-cost Wearables Manufactured by Hybrid 3D Printing
New method combines precision printing of stretchable conductive inks with pick-and-place of electronic components to make flexible, wearable sensors.
Laser ultrasound: the future of metal 3D printing?
Nell Walker for Manufacturing Global: Using laser ultrasound rather than camera imaging, it is hoped that Duttons work could encourage the use of 3D printing within mass manufacturing industries, as it removes the need for a separate inspection process.
Defending 3D Printers From Hackers
Charles Q. Choi for IEEE Spectrum: Researchers reveal three methods of verifying that 3d-printed parts have not been compromised by someone hacking the printer itself.
Space-Based 3-D Printing Reaches Milestone
Mike Wall, SPACE.com: A 3D printer built by the California-based company Made in Space churned out multiple polymer-alloy objects - the largest of which was a 33.5-inch-long (85 centimeters) beam - during a 24-day test inside a thermal vacuum chamber (TVAC) here in Silicon Valley at NASA's Ames Research Center in June.
Voodoo Automates 3D Printing to Take on Injection Molding
Michael Molitch-Hou for Engineering.com: With Project Skywalker, Voodoo Manufacturing was able to automate an important part of its manufacturing process.
Toward additive manufacturing
Phys.org: Although additive manufacturing has been around since the 1980s, the technology has advanced rapidly over the past few years.
100x faster, 10x cheaper: 3D metal printing is about to go mainstream
Loz Blain for New Atlas: Desktop Metals Studio System includes a fully-automated, office-friendly sintering furnace with fast cycle times and a peak temperature of 1400°C, allowing for the sintering of a wide variety of materials
How GE Appliances Built an Innovation Lab to Rapidly Prototype Products
Harvard Business Review: Midway through 2014, GE Appliances launched FirstBuild - a GE-equipped innovation lab and micro-factory - to augment the strengths of a long-established company with those of an entrepreneurial startup. Separation is the key.
The US Navy 3D printed a concept submersible in four weeks
Andrew Liptak for The Verge: The team began work in August 2016, and used a massive industrial 3D Pinter called Big Area Additive Manufacturing (BAAM) to manufacture six carbon fiber sections, which were then assembled into the 30 foot long vehicle.
New 3D Printing Technique Significantly Strengthens Materials
Kenny Walter for R&D Magazine: Researchers from Texas A&M University have strengthened 3D printed parts by applying traditional welding concepts to bond the submillimeter layers in a 3D printed part together.
AFRL researchers explore automation, additive technologies for cost efficient solar power
Phys.org: Solar cells can generate electricity in an environmentally friendly way, but current, complex fabrication costs make the technology expensive.
Desktop Metal gets $115 million investment in 3D printing technology
Andy Rosen for The Boston Globe: The company said the amount represents the largest private haul for any 3D printing company focused on metal. Desktop Metal has now raised $212 million since its launch in 2015.
3D Printing Will Make the Construction Industry More Sustainable
David Silverberg for Motherboard: Look at the past three years: In March 2017, Dubai construction firm Cazza said it plans to build the world's first 3D-printed skyscraper by 2020
Spider robots on the move for additive manufacturing
Stuart Nathan for The Engineer: Like several concepts in mobile additive manufacture, the Spider bots grew out of a concept to build bases for exploration on the Moon and other planets.
This NYC Startup Just Raised $5M to Make Manufacturing in America Viable Again
By AlleyWatch: Voodoo Manufacturing is a software-enabled 3D printing factory that works with major brands to produce high-quality products, prototypes and parts at scale.
Records 481 to 495 of 809
First | Previous | Next | Last
Additive & 3D Printing - Featured Product
Materialise CO-AM Software Platform
Scale and maximize your AM ROI - Connect data via a digital thread, maximize your ROI, and ensure you get the most out of your additive manufacturing (AM) production. CO-AM combines our industry-leading Pre-Print Software, like Magics and Next-Generation Build Processor, with our AM Digital Factory Software, such as our state-of-the-art AM MES and Identify3D.
Manufacturing and Automation - Featured Company
Premio Inc
Premio is a global solutions provider specializing in computing technology from the edge to the cloud. We design and manufacture highly reliable, world-class computing solutions for enterprises with complex, highly specialized requirements for over 30 years. Our engineering specialty and agile manufacturing pushes the technical boundaries in Embedded IoT Computers, Rugged Edge Computers, HMI Displays and HPC Storage Servers.
