What is SMAC stack?
As many manufacturers dont have large IT departments, employing each of SMACs four components is a good way to propel production toward growth and increased efficiency. The four components are: Social, Mobility, Analytics, and Cloud.
5 ways to advance robotics in manufacturing
Stephanie Condon for ZDNet: The maturity of automated technology used in manufacturing is all over the map, says Carnegie Mellon Prof. Howie Choset, but there are concrete ways to fix that.
Introducing Myriad X: Unleashing AI at the Edge
Remi El-Ouazzane for Intel: The First Vision Processing Unit with a Dedicated Neural Compute Engine will Give Devices the Ability to See, Understand and Interact with the World Around Them in Real Time
Machine Acquisition a Strategic Move for Indiana Manufacturer
We now make the part from solid, less expensive bar stock -- the whole part, including putting points on the end of the fins for water flow, taking cycle time down to 35% of what is used to take machining extruded stock. And now it is a stronger part as well.
IIoT Deployments to Double: Manufacturers Reinvent Themselves with New Technologies
Dick Weisinger for Formtek: But a survey by ABI Research found that 74 percent of companies are investigating and planning to deploy IoT within the next 12 months. Over that period, IIoT deployments are expected to double.
Why Startups Are the Future for the Industrial Internet
Predictive maintenance is revolutionizing the industry and transforming the entire operation. This technology predicts problems in a factory before they even happen, changing the paradigm and preventing disasters.
What is IO-Link
IO-Link (IEC61131-9) is an open standard serial communication protocol that allows for the bi-directional exchange of data from sensors and devices that support IO-Link and are connected to a master.
Amazon robots bring a brave new world to the warehouse
Michael Pooler for FT.com: An industrial dance takes place every day and night on the floor of Amazons huge warehouse in Manchester.
Laser ultrasound: the future of metal 3D printing?
Nell Walker for Manufacturing Global: Using laser ultrasound rather than camera imaging, it is hoped that Duttons work could encourage the use of 3D printing within mass manufacturing industries, as it removes the need for a separate inspection process.
Endress+Hauser's IIoT Vision
We currently offer telemetry devices and cloud based dashboards for our customers to collect process data from remote instrumentation and provide dashboards and operational efficiencies for supply chain management with our Supplycare service offering.
Distribution Center Best Practices to Improve Safety & Efficiency
Nobodys bottom line is more valuable than the human lives that help create it. To that end, consider the following best practices for shoring up safety in your facility.
Has IIoT Become the Norm Across All Industrial Sectors? Industry Experts Say
Larry Turner for Industry Week: Industry experts agree, it makes sense to start now and to make small steps towards the big idea of IIoT. Partnerships can help the process.
Special Tradeshow Coverage for PACK EXPO Las Vegas
PACK EXPO was held from September 25th - 27th in Las Vegas. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
IIoT Monitoring Finally Included with AGVs
Too much data, little of which can be accessed and used effectively. From tuggers, AGCs (Automated Guided Carts), and AGVs, there is a real need to include IIoT monitoring.
Small Town America's Newest Product: Advanced Manufacturing
Harold L. (Hal) Sirkin for Forbes: People with skills and talent typically gravitate to "superstar cities," such as New York and Los Angeles, or to "knowledge and tech hubs" like Boston, San Francisco, Seattle and Washington, D.C., not to small towns in the South.
Records 2341 to 2355 of 3079
First | Previous | Next | Last
Featured Product
Model TR1 Tru-Trac
The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.
Manufacturing and Automation - Featured Company
EXAIR
EXAIR intelligent compressed air® products solve problems in industrial plants while reducing compressed air consumption and increasing safety for personnel. We have the largest variety of sizes, materials and performance characteristics in order to provide the best solution for your processes and problems.
Our products are commonly used to conserve air, cool processes or parts, convey material, clean surfaces or coat surfaces. EXAIR's 15 extensive product lines include air knives, air wipes, air nozzles and jets, atomizing nozzles, static eliminators, cold gun air coolant systems, air amplifiers, safety air guns, air operated conveyors, industrial housekeeping products, vortex tubes and spot cooling products, cabinet cooler systems, vacuum generators, compressed air optimization products, and associated accessories.
Products meet OSHA standards and are CE and RoHS compliant. Five-year warranty on compressed air products and one-year warranty on accessories and electrically powered products.
