Industry 4.0 in Hannover Messe 2016 leads manufacturers to cross-industry innovations

Back in Hannover Messe 2011, Germany announced the Industry 4.0 concept and initiated the world's fourth industrial revolution. Since then, Hannover Messe has become a focal point for Industry 4.0 innovations. As Hannover Messe 2016 closes in, the exhibition will once again be surrounded by various Industry 4.0-related hot topics such as integrated industry, smart manufacturing and more. Coming soon on April 25 to 29, Hannover Messe 2016 will be based on the theme "Integrated Industry – Discover Solutions", which aims to provide an interpretation of the smart manufacturing model of Industry 4.0. As a Taiwanese company with deep expertise in IoT automation, NEXCOM has planned four themed demonstrations that map out a complete solution blueprint for industry 4.0 in the upcoming event. Joe Lin, General Manager of NEXCOM's IoT Automation Solutions Business Group, states, "Early Industry 4.0 solutions focused on the lower layers of factory communication where IoT gateways were used to integrate different industrial protocols, bridging the Industry 4.0 last mile connection to fulfill the 'connected' concept. Now in 2016, NEXCOM will extend the pathway to the cloud through NEXCOM IoT Studio configuration tool and IoT gateways, which consolidate the management and connection of factory field devices onto a unified control interface, accelerating data aggregation. This will enable a two-way field-to-cloud connection for big data analytics, promoting development for more Industry 4.0 applications."   Cont'd...

What Do Device Developers And Design Engineers Need To Know About Membrane Keypads And Touch Pads

The evolution of innovative input devices is far from over. New technologies and products are revolutionizing the market all the time.

Why Everyone Must Get Ready For 4th Industrial Revolution

Bernard Marr for Forbes:  First came steam and water power; then electricity and assembly lines; then computerization… So what comes next? Some call it the fourth industrial revolution, or industry 4.0, but whatever you call it, it represents the combination of cyber-physical systems, the Internet of Things, and the Internet of Systems. In short, it is the idea of smart factories in which machines are augmented with web connectivity and connected to a system that can visualize the entire production chain and make decisions on its own. And it’s well on its way and will change most of our jobs. Professor Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, has published a book entitled The Fourth Industrial Revolution in which he describes how this fourth revolution is fundamentally different from the previous three, which were characterized mainly by advances in technology. In this fourth revolution, we are facing a range of new technologies that combine the physical, digital and biological worlds. These new technologies will impact all disciplines, economies and industries, and even challenge our ideas about what it means to be human.   Cont'd...

What CNC Programming Style Best Suits Your Operations?

In most situations, it's possible to define the workpiece geometry in CAD and then export it into the CAM system. This saves a lot of time when processing complex parts because the operator doesnt have to duplicate the effort of creating the geometry.

Collaborative Robots Are Broadening Their Marketplaces

In a human-machine study conducted by an MIT professor, it was shown that teams made of humans and robots collaborating efficiently can be more productive than teams made of either humans or robots alone.

Robots: A New Kind of Manufacturing Workforce

Improving the effectiveness of small and medium manufacturers could help stimulate the economy and drive job creation. Adding robotic employees to the manufacturing mix might just make manufacturers in the United States more competitive with their counterparts in Asia.

How Innovators Overcome Smart Factory Challenges

Brad Done for Manufacturing.net:  Smart factories are the manifestation of what's being called the Fourth Industrial Revolution — a concept that's been in the conceptual-buzz phase for years. While the last revolution saw the widespread digitization of manufacturing technology, allowing information to be produced, replicated and shared on an unprecedented scale, the Fourth Industrial Revolution, or Industry 4.0, could take manufacturing to a place verging on self-awareness. What does this look like? Smart components will interact directly with other devices — independent of human micromanagement and oversight. It means our technologies will be capable of building and interpreting a more nuanced understanding of the manufacturing environment. People and machines will have access to real-time virtual representations of all manufacturing functions. It's a vision that's fast becoming a reality. Experts have expounded on the challenges, but this hasn't prevented early-adopters from making significant headways.   Full Article...

5 Easy Steps to Choosing a Conveyor

This graphic walks you through all of the components and pieces of a conveyor, the options and configuration varieties available for each part, and the ideal context and product for that specific element.

3D Printing Reboot

Dana Blankenhorn for SeekingAlpha:  While many people consider 3D printing dead, given what has happened to the stocks of industry leaders such as 3D Systems, Stratasys, ExOne and voxeljet , it's more accurate to say the industry has rebooted and is preparing for another run. This means the industry's excitement is now coming from college campuses and startups. As an investor you want to keep an eye on this, but withhold your investment. Industry leader 3D Systems has been drawing a bid this year as it  undergoes a restructuring, bringing in more professional management, anddropping the Cube, its consumer printer, from the product line. For all of 2015 it reported a loss of $664 million, $5.85/share, on revenues of $666 million. The stock, which once traded as high as $96/share during the last boom, is now at around $13, but it had been as low as $6.42 in mid-January. Founder Charles Hull, 76, has been kicked upstairs to a Chief Technology Officer role.   Cont'd...

America Makes and ANSI Launch Additive Manufacturing Standardization Collaborative

America Makes, the National Additive Manufacturing Innovation Institute, and the American National Standards Institute (ANSI) today announced the launch of the America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC). The purpose of the AMSC will be to coordinate and accelerate the development of industry-wide additive manufacturing standards and specifications consistent with stakeholder needs and thereby facilitate the growth of the additive manufacturing industry. Participation is open to any interested person. The catalyst for the AMSC is the fact that a number of standards developing organizations are engaged in standards-setting for various aspects of additive manufacturing, prompting the need for coordination to maintain a consistent, harmonized, and non-contradictory set of additive manufacturing standards. Full Press Release:

High-Tech Manufacturing Jobs - Battery Manufacturing in America

We believe advanced manufacturing provides the opportunity for more productivity, cost savings and improved energy efficient production thus allowing companies to be more competitive right here in the USA.

Bosch combines "Industrie 4.0" platform and Industrial Internet Consortium standards

Connected industry is now becoming an international reality. In a new project, Bosch is working together with partners to combine the technical standards of Germany’s “Industrie 4.0” platform and of the Industrial Internet Consortium (IIC) for the first time. This combination of the two approaches allows the exchange of data between central areas of connected industry. “Industry 4.0 is not so much a national as an international issue. Only a truly global approach – without competing company standards or differing national regulations – will allow it to develop to its full potential,” said Dr. Werner Struth, a member of the Bosch management board, at the Bosch ConnectedWorld IoT conference in Berlin. To date, the lack of a common language has hindered the smooth international coordination of manufacturing, logistics, and building and energy management. “As we head towards connected industry, two worlds are now coming together. This is a major advance. A combination of these two standards paves the way for numerous new cross-border business opportunities for Industry 4.0 solutions, both for Bosch and for other international companies,” Struth said.   Full Press Release:

Plattform Industrie 4.0 and Industrial Internet Consortium Agree on Cooperation

Representatives of Plattform Industrie 4.0 and the Industrial Internet Consortium met in Zurich, Switzerland to explore the potential alignment of their two architecture efforts - respectively, the Reference Architecture Model for Industrie 4.0 (RAMI4.0) and the Industrial Internet Reference Architecture (IIRA). The meeting was a success, with a common recognition of the complementary nature of the two models, an initial draft mapping showing the direct relationships between elements of the models, and a clear roadmap to ensure future interoperability. Additional possible topics included collaboration in the areas of IIC Testbeds and I4.0 Test Facility Infrastructures, as well as standardization, architectures & business outcomes in the Industrial Internet. State Secretary, Matthias Machnig, Ministry for Economic Affairs and Energy: “We welcome the cooperation of both initiatives as an important milestone in the cooperation of companies internationally. The combined strengths of both IIC and Plattform Industrie 4.0 will substantially help to pave the way for a mutually beneficial development of a digitized economy for our international businesses.” Prof. Dr. Siegfried Russwurm, Technical Director of Plattform Industrie 4.0, CTO and Member of the Managing Board of Siemens AG, said„Collaborating with other initiatives is important, especially for Germany’s export-oriented economy. We are highly interested to cooperate intensively with others in order to pave the way for global standards. Cooperating with IIC – and with other consortia – is an important step in the right direction.”   Full Press Release:

Patent Deployment in Smart Manufacturing

Since fewer companies have applied smart manufacturing patents in chemical, food, biotechnology, mechanical, transport, and machine tools industries, these sectors are relatively uncontested for perspective vendors.

2016: Why Manufacturers Should Embrace Real-Time Data

New technologies such as IoT attract the best minds in business, but also a lot of unproven and even untested ideas. Proceed with care.

Records 1081 to 1095 of 1163

First | Previous | Next | Last

Design & Development - Featured Product

Performance and Safety Excellence Consulting

Performance and Safety Excellence Consulting

Performance Solutions by Milliken is a dedicated consulting and training group that helps guide businesses toward success. From supply chain, to operations and safety, we're dedicated to developing sustainable results for our clients through the implementation of a holistic operating system. We believe engaging all associates in the process will systematically transform your company to create efficiency, uncover hidden capacity, and generate long-term gains. Are you ready to reinvent your operations and transform your organization? Let's get started.