Grocery 4.0: Ocado reshapes retail with robotics and automation
Jon Excell for The Engineer: Online grocer Ocado is establishing a reputation as a major technology player. Jon Excell reports
If prompted to name a UK company at the cutting edge of robotics and automation, few of us would cite one of the country’s best-known grocery retailers.
But, as The Engineer learned on a recent visit to one of its key facilities, online supermarket Ocado is establishing a reputation as a major technology player: harnessing and developing machine-learning systems, Internet of Things concepts and robotic hardware to a degree that leaves many traditional engineering businesses in the shade. Full Article:
Researchers fire 3-D printed ammo out of a 3-D printed grenade launcher
Mr. Seung kook “Sunny” Burns and Mr. James Zunino for US Army Blog: Researchers at the U.S. Army Armament Research, Development and Engineering Center (ARDEC) successfully fired the first grenade created with a 3-D printer from a grenade launcher that was produced the same way. This demonstration shows that additive manufacturing (commonly known as 3-D printing) has a potential future in weapon prototype development, which could allow engineers to provide munitions to Soldiers more quickly.
The printed grenade launcher, named RAMBO (Rapid Additively Manufactured Ballistics Ordnance), was the culmination of six months of collaborative effort by the U.S. Army Research, Development and Engineering Command (RDECOM), the U.S. Army Manufacturing Technology (ManTech) Program and America Makes, the national accelerator for additive manufacturing and 3-D printing.
RAMBO is a tangible testament to the utility and maturation of additive manufacturing. Cont'd...
The optimist's guide to the robot apocalypse
Sarah Kessler for Quartz: Machines, you may have heard, are coming for all the jobs.
Robots flip burgers and work warehouses. Artificial intelligence handles insurance claims and basic bookkeeping, manages investment portfolios, does legal research, and performs basic HR tasks. Human labor doesn’t stand a chance against them—after the “automation apocalypse,” only those with spectacular abilities and the owners of the robots will thrive.
Or at least, that’s one plausible and completely valid theory. But before you start campaigning for a universal basic income and set up a bunker, you might want to also familiarize yourself with the competing theory: In the long run, we’re going to be just fine. We’ve been here before. Cont'd...
How Linear Actuators and Motion Systems Are Used in Modern 3D Printing Industry
Succinctly, each of the motion systems of 3D printers discussed has their advantages over the other, and in many cases, a combination is required to design the interaction of mechanical components in the printing space.
Ford is trying 3D printing for car parts
Aaron Smith for CNN: Ford (F) figures they will be lighter than their metal counterparts, and therefore more fuel efficient.
The company will start with spoilers, those streamlined decorations fastened to car exteriors to make them look faster. For now, the company is testing parts for its Ford Performance race car division, but 3D-printed parts could be used for mass-market cars and trucks in the future.
Ford released photos of 3D-printed parts, like the plastic molding for car interiors. The company hinted that it might one day be able to 3D-print more complicated parts, like intake manifolds. Cont'd...
Japan worker shortage has only one winner so far: robots
Leo Lewis for Financial Times: Earlier this week, Japanese TV audiences glimpsed a potentially revolutionary contraption from the Matsue College of Technology that rapidly separates closed shijimi clamshells into those with a live mollusc inside and those without.
Cut to footage of a human sorter, expertly performing the same function at a rate of just 90 kgs of shijimi per day and whose job this machine seems destined to replace. In other parts of the world, the juxtaposition could seem cruel or politically charged; in Japan, it is almost celebratory. The great conundrum for investors — and increasing preoccupation of sellside analysts attempting to talk clients out of underweight Japan positions — is whether the equity market provides a neat play on Japan’s deepening worker shortage and the promised surge in wages that has to date been all gong and no dinner. Cont'd...
A 10K tiny house 3D-printed in 24 hours
Lacy Cooke for Inhabitat: Building a house typically takes months, exacerbating the housing crisis so many people face worldwide. Apis Cor, a San Francisco-based company that specializes in 3D-printing, decided to tackle that crisis with a groundbreaking mobile 3D-printer that can print an entire 400-square-foot tiny home in just 24 hours. What’s more, doing so costs just over $10,000 – a steal compared to most modern homes.
On their website, Apis Cor says the construction industry may be sluggish now, but they will persevere in disrupting that industry “until everyone is able to afford a place to live.” Their revolutionary mobile 3D-printer is small enough to be transported, so assembly and transportation costs can be slashed. Although their mobile printer only needs a day to print a home from a concrete mixture, the company says their buildings will last up to 175 years. Not only is their process speedy, but environmentally friendly and affordable too. Cont'd...
Achieve Overall Equipment Effectiveness (OEE) Using Hygienic Conveyors
So how do you measure the productivity of your manufacturing equipment? How do you gain insight to improve your processes? The answer is Overall Equipment Effectiveness, or OEE.
BeeHex Raises $1 Million For Fresh Food Robots
BeeHex, Inc., the 3D food printing company that "promises to change the way food is made", completed its $1,000,000 seed round led by Grote Company founder, Jim Grote.
BeeHex, with its flagship product Chef 3D, builds 3D food printing systems that assemble and deliver fresh foods. Best known for printing pizza, in 2016 BeeHex teamed up with Michelin bib gourmand-rated Italian chef Pasquale Cozzolino to create gluten-free and savory pizza crust options using an 80-year-old mother yeast. BeeHex's Chef 3D systems began 2016 with a "print time" of six minutes to create a 12" pizza and exited 2016 with a print time at around the one-minute mark. BeeHex systems will allow for personalized food orders from an app and also with the push of a button, fit for commercial kitchen use. Full Press Release:
Manufacturing in America 2017 Trade Show
Over 2500 manufacturing executives, engineers and enthusiasts will meet at Manufacturing in America 2017, which will be held on March 22 and 23rd at the Detroit Marriott located at the Renaissance Center in downtown Detroit.
Hot Jobs Study Reports Manufacturing a Top Industry
For entry level manufacturing positions, higher education is not normally required. Instead, a personal and commercial drivers license, and special certifications such as an Occupational Safety & Health Administration Certification, Food Safety Program education, and HAZMAT endorsement, can make a candidate more qualified when applying to manufacturing jobs.
Dubai company ready to 3D print your house, says 19-year-old founder
Michael Fahy for The National: A teenager who has relocated his start-up business in 3D printing technology from Silicon Valley to Dubai has said that it is ready to begin offering 3D printed houses and buildings.
Chris Kelsey, 19, the co-founder and chief executive of Cazza Construction Technologies, has said that its mobile printing robots are capable of printing a 200 square metre house in a single day using just two workers – one to monitor the machine and another to add elements such as steel rebar and electricity cables within pre-determined sections.
"If someone wants to build a house, we design and engineer according to 3D standards. From there we bring the machine on site and set up the position where it is meant to print. Once it is in position, the machine 3D prints according to the software design," he said.
Mr Kelsey, who was born in Pennsylvania and grew up in California, began to seriously look at the market for 3D printing in construction early last year, using the proceeds generated from the sale of an earlier company – an app and website development business known as Appsitude. Cont'd...
Ericsson and China Mobile jointly demo the 5G-enabled Smart Factory at MWC 2017
Ericsson and China Mobile have jointly developed a 5G-enabled Smart Factory prototype using key 5G Core Network technology - Network Slicing. The prototype will be on display at Mobile World Congress 2017 in Barcelona, Spain. The demo will simulate the assembly line in the Smart Factory environment, enabled by the 5G connected industry standard PLC connections.
Triggered by Made-in-China 2025 and Industry 4.0, the manufacturing sector has changed profoundly in China during recent years. Industries have engaged in a steady re-industrialization relying on ICT enhancements.
At the root of industrial revolution is the implementation of a reliable and flexible communication layer, capable of dealing with increasingly higher capacity allocations of on-demand manufacturing and adjustments. View Video here:
This 3D-Printer Uses Holograms for Super-Fast Printing
Patrick Lynch for Arch Daily: One established 3D-printing technique is using laser to cure light-activated plastic, building up layers one at a time in a time-consuming process. But now tech start-up Daqri has discovered a way of speeding up that process: by using a 3-dimensional hologram. The printer works by projecting a 3D light field into a dish of the light sensitive monomer “goo.” The plastic quickly hardens, allowing it to be extracted using a screen. The whole process takes just 5 seconds, compared to the several minutes than would be required by an ordinary 3D printer.
In addition to its increased speed, the printer also creates monocoque objects that don’t suffer from the weaknesses found in the “grain” between layers of 3-D objects. The process would also eliminate the need for supporting structures currently required to create some 3D objects. Cont'd...
Electro-Mechanical Assembly Press Technology Moves Li-Ion Battery Manufacturer A Step Closer To Perfection
Promess became involved with the battery manufacturer when the hydraulic presses, originally specified for both the pressing and assembly operations, proved to be unable to deliver the level of consistent process control required.
Records 661 to 675 of 824
First | Previous | Next | Last
Supply Chain - Featured Product
Parvalux by maxon - AC or DC electric motors for conveyor systems?
The material handling industry uses conveyors to ensure that products are distributed effectively, AC or DC motors are chosen depending on the weight it needs to carry and the speed at which it needs to work. Learn which type of conveyor motor might be best for your application and how Parvalux can help you select a geared motor from stock or create a fully custom design.
