Micro Molding and Micro Optics
In general terms, however, micro-optics are typically tiny lenses, beam-splitters, prisms, light-pipes, and other optical components in the range of 20 microns to 1 mm in size, or larger optical components with micron features.
Smith College Team From Massachusetts Wins CoVent-19 Challenge to Design New Ventilator for Developing World
-"We came into this not knowing anything about ventilators," SmithVent team lead says
-Top 3 teams from over 200 submissions win on-demand 3D printing services from Stratasys
Faulty Takata Airbags Make Headlines Again
The recalls made in late-2019 was due to defective NADI (Non-Azide Driver Inflators). These defective airbags have inflators that could explode, which the manufacturers have narrowed it down to a faulty seal.
Mini factories in containers help reduce mask shortages
The factory in a box could be located in front of a hospital, next to a shopping center, or near a school. The integrated air-conditioning system with air purification filters makes production possible even in places with high risk of viral contamination.
What Is a Load Bank and Why Do Manufacturers Need Them?
A load bank can be an important asset in a variety of industries. Load banks are stationary or portable tools that mimic the expected electrical load on a power source in a commercial or industrial setting.
Lessons from World War II on Manufacturing and the COVID-19 Pandemic
A look at manufacturing and the COVID-19 pandemic shows the comparison to WWII is an apt one. From victory gardens to discussions of shared sacrifice to ramping up production of critical supplies, the parallels between the health crisis and WWII are hard to ignore.
Production line flexibility - How to use modularization for food production increase
According to an industry survey, the majority of food manufacturing companies are expecting to increase production. However, the same study suggested automation does not offer enough flexibility to fulfil an increase in production.
As The Electronics Manufacturing Industry Slowly Recovers From The Pandemic, What Can We Learn?
Within the realm of manufacturing, one thing is abundantly clear: supply chains are intrinsically tied and vulnerable to just about everything in our world today.
COVID-19 Accelerates Digitalization in Manufacturing But Data Silos Must Go!
When the manufacturing industry emerges out of the COVID-19 pandemic, we will see the rapid trend of digitalization. However, to achieve maximum success - this will only happen if manufacturers finally deal with the challenge of data silos!
INTERNATIONAL MANUFACTURING TECHNOLOGY SHOW CANCELLED FOR FIRST TIME SINCE WWII
IMTS to continue to offer digital experiences to foster connections, networking and technical learning opportunities.
Siemens introduces workplace distancing solution to manage "next normal" manufacturing
Using proven software and hardware, Siemens has developed a unique workplace distancing solution that helps manufacturers to simulate and manage employee exposure risks while enabling productivity throughout their facilities
The New Normal for Global Manufacturing
The 3D printing industry has proven instrumental in the production of essential medical equipment ranging from face masks to ventilators.A key reason why additive manufacturing has been so effective during the pandemic: it doesn't rely on a global supply chain.
3D modelling technique for fast-track face shield production
Using stacked model data, the technique can dramatically increase 3D printing output, assisting in producing face shields for healthcare workers fighting COVID-19.
PRECISION MOLDING & THE INTERNET OF THINGS
While most analysis of the IoT is in respect of its positive influence on manufacturing processes, the growth in the IoT also opens up huge possibilities for micro molding as there is burgeoning demand for a variety of new and innovative micro devices.
3D Systems Announces First-to-Market Enhancements to Reverse Engineering Software - Enabling Increased Efficiency & Accuracy across Broad Application Portfolio
-Unique unroll/reroll function in Geomagic® Design X enables a new modeling workflow for complex revolved parts resulting in a 94% efficiency improvement.
-Geomagic Design X's new features for hybrid surfacing workflows accelerate productivity, improve downstream CAD re-usability
Records 601 to 615 of 1282
First | Previous | Next | Last
Featured Product
Quality assurance in the manufacturing industry
Efficiency and precision with CSP software. In the highly competitive world of manufacturing, quality assurance is a critical factor for success. CSP offers you state-of-the-art software solutions specifically designed to ensure the highest standards of quality assurance in the manufacturing industry.
Manufacturing and Automation - Featured Company
Teledyne FLIR
Teledyne FLIR designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging, visible-light imaging, video analytics, measurement and diagnostic, and advanced threat detection systems. Teledyne FLIR offers a diversified portfolio that serves a number of applications in government & defense, industrial, and commercial markets. Our products help first responders and military personnel protect and save lives, promote efficiency within the trades, and innovate consumer-facing technologies. Teledyne FLIR strives to strengthen public safety and well-being, increase energy and time efficiency, and contribute to healthy and intelligent communities.
