From OLED Encapsulation to Plagiarism Protection
When ultra-thin transparent varnishes are applied onto transparent foil tapes, defects in the coating can now be made visible immediately during the coating process. This is possible thanks to an inline detection system that uses fluorescence dyes.
Local Motors: Driving Innovation with Micro-Manufacturing
NewCo Shift: Local Motors was founded in 2007 by John “Jay” Rogers, an Ivy league-educated ex-Marine who wanted to marry his lifelong interest in vehicles with new economic models. The result: Local Motors, a company that, after eight years in business, now produces a series of vehicles built locally in a handful of facilities, but designed by a global community of enthusiasts.
Local Motors’ business model is built around its microfactories. The four now in existence — and the dozens more that the company plans to open over the next 10 years — each focus on a few vehicle types. Each looks to source components locally to the greatest extent possible. And each features a modular factory floor that can be configured and reconfigured as needed to accommodate the demand for individual vehicles. Cont'd...
MIT's Foundry software is the 'Photoshop of 3D printing'
Andrew Dalton for enGadget: Because the materials from a 3D printer aren't the most functional, their output has largely been limited to prototyping in the past. That should change in the near future with devices like MIT's own MultiFab, which can print up to 10 different materials at a time, but it still doesn't solve the problem of how to design such complex objects. That's where the new program called Foundry, created by MIT's Computer Science and Artificial Intelligence Laboratory comes in.
According to MIT CSAIL, Foundry can import objects designed with traditional CAD programs like SolidWorks and then assign specific materials or properties to different parts of the object. While creating a multi-material object in the past might have required days of work and multiple 3D printers to create (assuming it was possible with existing technology at all), CSAIL says these sorts of designs can now be created in mere minutes. Rather than manufacturing a separate piece for each material in the finished product, the entire object can now be printed in one fell swoop. Cont'd...
Special Tradeshow Coverage for FABTECH
FABTECH will be held from November 16th - 18th in Las Vegas, Nevada. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
Blockchain plus 3D printing equals 'smart manufacturing' and Ethereum you can touch
Ian Allison for International Business Times: Genesis of Things is a new "smart manufacturing" company which leverages intellectual horsepower from members of the Ethereum community.
This young company, established and launched just a few weeks before DevCon2 in Shanghai, has produced a tangible proof of concept in the form of a set of 3D printed titanium cufflinks inscribed with a QR code and bearing the insignia of the Ethereum logo.
Genesis of Things combines 3D printing, blockchain and IoT in a virtuous, futuristic flow that re-imagines manufacturing processes. The company is in stealth right now and more details about how it operates and possible use cases will be released going forward.
It should be repeated that the cufflinks pictured are a proof of concept; this is not a commercial product but rather a limited edition to show the potential of the technology. Cont'd...
3-D-printed robots with shock-absorbing skins
Adam Conner-Simons for MIT News: Anyone who’s watched drone videos or an episode of “BattleBots” knows that robots can break — and often it’s because they don’t have the proper padding to protect themselves.
But this week researchers at MIT’s Computer Science and Artificial Intelligence Laboratory(CSAIL) will present a new method for 3-D printing soft materials that make robots safer and more precise in their movements — and that could be used to improve the durability of drones, phones, shoes, helmets, and more.
The team’s “programmable viscoelastic material” (PVM) technique allows users to program every single part of a 3D-printed object to the exact levels of stiffness and elasticity they want, depending on the task they need for it. Cont'd...
Case Study: Cabinet Coolers End Costly Shutdowns
A manufacturer of enclosure cooling systems prevented the loss of future production and eliminated downtime. Could this type of cooling be suited to your environment?
Special Tradeshow Coverage for PACK Expo International
PACK Expo will be held from November 6th - 9th in Chicago, Illinois. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
OMRON to Introduce 15,583 Models in 7 Categories to World, Second Wave of FA Devices Built on Common Design Platform
OMRON Corp., based in Kyoto City, will introduce to the world on October 3, 2016, a total of 15,583 models, in 7 categories, as the second wave of factory automation (FA) control devices built on a common design platform for unified product specifications.
Based on a wide range of products, OMRON has been continuing to work for the innovation of making control panels which house and control FA devices on the production front line. OMRON unified the design and size of FA devices, and introduced products in April 2016 which are built with the company's proprietary wiring technology "Push-In Plus Terminal Block" for device and control panel makers in need of "downsizing and space-saving" of FA devices and control panels, "expedited delivery," and "response to globalization." Full Press Release:
IMTS 2016 - Takeaways
Many of the OEMs were showing how their smart products and processes were driving new business models like servitization (manufacturing firms developing the capabilities to provide services and solutions that supplement their traditional product offerings) and new "power-by-the-hour" offerings.
Is a Robot After Your Job?
Robots may be after your job, but you could be their boss.
New modular AM 'smart factory' from Concept Laser decouples pre-production and production
Benedict for 3Ders.org: Â German metal 3D printing specialist Concept Laser has unveiled its new "smart factory" approach to additive manufacturing. The idea behind the Industry 4.0 "smart factory" is to decouple process stages, allowing tasks to be carried out in parallel and physically separate from one another.
The AM Factory of Tomorrow, Concept Lasers modular additive manufacturing factory-building kit, has been designed to allow manufacturers to seamlessly incorporate additive manufacturing technologies into existing production lines or to develop new and efficient AM production spaces. The Lichtenfels-based company has now revealed new aspects of its advanced manufacturing concept, detailing how a move from the sequential to the parallel could maximize production speed, cost-efficiency, and scalability.  Cont'd...
Â
Peugeot Teams Up With 3D Printing Startup for Parts and Possibly Full Cars
Daniel Bentley for Fortune: French carmaker PSA said on Thursday a partnership with a U.S. 3D printing startup would lead to cheaper production of whole vehicle structures as well as parts for its models.
The maker of Peugeot, Citroen and DS cars said it had agreed with Los Angeles-based Divergent 3D to develop metal printing processes for PSA production lines.
Carlos Tavares, PSA’s chief executive, said this could “dramatically scale down the size and scope of our manufacturing footprint” and yield lighter, more profitable vehicles. The carmaker did not quantify any impact on production jobs.
Industries from aerospace to healthcare use 3D printing for the production of metal and plastic components, while elaborate assemblies with moving parts often prove more difficult. Ford is among other carmakers exploring the technology. Cont'd...
Safety solutions for intelligent human-robot collaboration
Fanny Platbrood for SafeToWork: Human-robot collaboration (HRC) describes a work scenario in which humans and automated machines share and work in the same workspace at the same time. Driven by Industry 4.0, this model of collaboration promises highly flexible workflows, maximum system throughput and productivity, as well as economic efficiency. However, ensuring that HRC is actually able to live up to this promise requires exactly the right safety technology for the application in question.
One of the major issues associated with Industry 4.0 is making work processes flexible. At the extreme end of the spectrum, this may involve manufacturing products in batch size 1 under industrial mass-production conditions – that is, manufacturing unique items on a conveyor belt. Cont'd...
Automatic Lubrication Systems That Stand Up to Corrosive, Caustic Environments
The latest in automated lubrication systems ensure optimum equipment performance, even in harsh plant environments, and reduce unscheduled maintenance. Corrosive plant environments are among the most serious threats to many industries today, contributing to extensive production downtime and exorbitant maintenance costs.
Records 751 to 765 of 856
First | Previous | Next | Last
Supply Chain - Featured Product
Threaded Line Vac
The Threaded Line Vac is a low-cost conveyor that uses ordinary pipe. It is ideal for long distance conveying of parts, scrap, trim and other bulk materials. Models from 3/8 NPT to 3 NPT are available in aluminum and stainless steel. https://exair.co/184_5169
EXAIR is offering a special right now on all Line Vacs. Learn more at https://exair.co/184-lvgpromo
