3D printing of patterned membranes opens door to rapid advances in membrane technology

Penn State Materials Research Institute via Science Daily:  A new type of 3D printing developed by researchers at Penn State will make it possible for the first time to rapidly prototype and test polymer membranes that are patterned for improved performance. Ion exchange membranes are used in many types of energy applications, such as fuel cells and certain batteries, as well as in water purification, desalination, removal of heavy metals and food processing. Most ion exchange membranes are thin, flat sheets similar to the plastic wrap in your kitchen drawer. However, recent work has shown that by creating 3D patterns on top of the 2D membrane surface, interesting hydrodynamic properties emerge that can improve ion transport or mitigate fouling, a serious problem in many membrane applications. Currently, making these patterned membranes, also called profiled membranes, involves a laborious process of etching a silicon mold with the desired pattern, pouring in the polymer and waiting until it hardens. The process is both time-consuming and expensive, and results in a single pattern type. “We thought if we could use 3D printing to fabricate our custom-synthesized ion exchange membranes, we could make any sort of pattern and we could make it quickly,” says Michael Hickner, associate professor of materials science and engineering at Penn State.   Cont'd...

New dual-step method provides 3D printing of conductive metals.

Shalini Saxena for ArsTechnica:  Customizable, wearable electronics open the door to things like heart-monitoring t-shirts and health-tracking bracelets. But placing the needed wiring in a complex 3D architecture has been hard to do cheaply. Existing approaches are limited by material requirements and, in the case of 3D writing, slow printing speeds. Recently, a research team at Harvard University developed a new method to rapidly 3D print free-standing, highly conductive, ductile metallic wires. The new method combines 3D printing with focused infrared lasers that quickly anneal the printed nanoparticles into the desired architecture. The result is a wire with an electrical conductivity that approaches that of bulk silver.   Cont'd...

RAPID 2016 - HP begins selling its Jet Fusion 3D printer; says it's 50% cheaper, 10X faster than others

Lucas Mearian for ComputerWorld:  Hewlett-Packard today began taking orders for its first 3D printer, the HP Jet Fusion printer, which it said will be up to 10 times faster than existing machines and can cut the cost of manufacturing parts in half. At the RAPID 3D additive manufacturing conference here, HP revealed two models:  the lower-cost and lower production 3200 series and the 4200 series, for which it is now taking orders. The 4200 series will begin shipping to manufacturers in October; the 3200 series will be available in mid-2017. HP originally unveiled its Jet Fusion printer in October 2014. HP claims its printer will enable mass production of parts through additive manufacturing (3D printing), instead of just rapid prototyping, for which the technology  is typically used. The printers are unlikely to be used to produce millions or billions of production parts; think, instead, in terms of hundreds, thousands or tens of thousands of parts, HP said.   Cont'd...

The MakerBot Obituary

From Brian Benchoff at Hackaday:   MakerBot is not dead, but it is connected to life support waiting for a merciful soul to pull the plug.  This week, MakerBot announced it would lay off its entire manufacturing force, outsourcing the manufacturing of all MakerBot printers to China. A few weeks ago, Stratasys, MakerBot’s parent company, released their 2015 financial reports, noting MakerBot sales revenues have fallen precipitously. The MakerBot brand is now worth far less than the $400 Million Stratasys spent to acquire it. MakerBot is a dead company walking, and it is very doubtful MakerBot will ever be held in the same regard as the heady days of 2010. How did this happen? The most common explanation of MakerBot’s fall from grace is that Stratasys gutted the engineering and goodwill of the company after acquiring it. While it is true MakerBot saw its biggest problems after the acquisition from Stratasys, the problems started much earlier... (full article) (fist hand account from Isaac Anderson)

Disney files patent for near instantaneous 3D printing

Lucas Mearian for ComputerWorld:  Disney Research has filed a patent for a 3D printing technology that uses high-intensity light to harden photo-sensitive resin in a single process, removing the need for layer-by-layer printing. The patent describes a machine for printing in "a nearly instantaneous manner." "Presently, 3D printing is extremely slow and time consuming. For example, it may take several hours to print a single 3D object even if the 3D object is relatively small (e.g., several inches in diameter and four to 12 inches tall)," Disney stated in its patent filing. "The 3D printing process that uses conventional 3D printers ... is limited in its speed by the speed of the mechanism moving the print head to each new position on a print layer."   Cont'd...

A Swarm Of 3D Printing Spiders Could Build Your Next Home

IDO LECHNER for PSFK:  Watching an object being 3D-printed is a spectacle to behold; the speed at which intricate geometries unfold before your eyes is enough for anyone to reckon that this is the future of manufacturing. While both consumer-grade models and more advanced versions are capable of whipping up objects made from different materials, each with their own aesthetic and subsequent properties, the scale of what can be fabricated is entirely based on the size of the printer at use. For this reason, a research team based out of Siemens’ Corporate Technology’s Princeton campus has developed mobile 3D printers in the shape of spiders, which are both autonomous and capable of working in sync to expedite the printing process. PSFK spoke with Siemens’ Director of R&D of Engineering Livio Dalloro on why the team decided to shape their printers like spiders, the implications such a technique might have on the industry, and how Siemens sees the device unfolding in the foreseeable future.   Cont'd...

Bring 3D printed robots to life with 'Ziro' hand-controlled robotics kit

Benedict for 3Ders.org:   Tech startup ZeroUI, based in San Jose, California, has launched an Indiegogo campaign for Ziro, the “world’s first hand-controlled robotics kit”. The modular kit has been designed to bring 3D printed creations to life, and has already surpassed its $30,000 campaign goal. It would be fair to say that the phenomenon of gesture recognition, throughout the wide variety of consumer electronics to which it has been introduced, has been a mixed success. The huge popularity of the Nintendo Wii showed that—for the right product—users were happy to use their hands and bodies as controllers, but for every Wii, there are a million useless webcam or smartphone functions, lying dormant, unused, and destined for the technology recycle bin.   Full Article:  

The Questions Executives Should Ask About 3D Printing

Channing Flynn for Harvard Business Review:  Most hearing aids in the U.S. are now custom-made on 3D printers. The U.S. Food and Drug Administration recently approved the first 3D-printed pills. Carmakers have started using 3D technology to produce parts. And last year saw the first demonstration of a digital printer producing multilayer, standards-based circuit boards. Imagine the changes afoot in the pharmaceutical, medical device, automotive, and consumer electronics industries. 3D printing is poised to redefine global manufacturing and distribution. It could upend supply chains, business models, customer relationships, and even entrepreneurship itself. It may do to physical goods what cloud computing is now doing to digital services; what the PC, internet, and smart mobility have done to personal computing; and what outsourcing did to software development and business processing — take mass distribution and innovation to the next level while realigning the very geography of work and trade.   Cont'd...

How Microfactories Can Bring Iterative Manufacturing to the Masses

ANDREW O'KEEFE and JASON DORRIER for Singularity Hub:  Humans manufacture a mind-numbing amount of stuff each year—ever wonder how we do it? In the past 100 or more years, it’s been all about economies of scale. This means you should make a lot of a thing because the more you make, the more your fixed expenses get spread out. This reduces the cost of each unit, from light bulbs to iPhones. Here’s the problem. It’s expensive to do a big manufacturing run. So, how do you know what to make in the first place? Often, it’s an educated guess based on prototypes and limited feedback, but you don’t really know until you try to sell a product—and by then, you’re fully committed, succeed or fail. Jay Rogers of Local Motors wants to upend common wisdom. Manufacturers should run through tons ofpotentially good ideas and then test them out to see if people actually want what they’re making before going full scale. And Rogers thinks microfactories are the way to do it.   Cont'd...

This 3D printer can rival standard manufacturing on the factory floor

Lucas Mearian for ComputerWorld:  Start-up Carbon began shipping its industrial-grade 3D printer with the expectation that big-name companies will soon be using it to replace traditional forms of manufacturing. Last year, the Silicon Valley company emerged from quiet mode to announce its technology: a machine that can create objects 25 to 100 times faster than other 3D printers. Carbon is not selling its M1 3D printer outright, but instead is offering it through a subscription price of $40,000 per year, which includes a service and maintenance plan. The three-year-old company based in Redwood City, Calif. said its Continuous Liquid Interface Production (CLIP) printing process can create objects in minutes compared to the hours a typical 3D printer requires.   Cont'd...

With this new 3D printing technique, robots can "practically walk right out of the printer"

Katherine Noyes for Digital Arts:  Imagine you could use a standard 3D printer to create your next robotic assistant. Just snap in a motor and battery, and it's ready to go. That's precisely the scenario made possible by a new 3D printing technique developed at MIT. Liquids have long been a challenge for 3D printing, and they're necessary for hydraulic devices like moving robots. On Wednesday, researchers at MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) announced what they call the first-ever technique for 3D printing robots that can print solid and liquid materials at the same time.   Cont'd...

NASA is sending a 3D printer to space that you can use

Emily Calandrelli for TechCrunch:  NASA is preparing to send its first commercial manufacturing facility to the International Space Station (ISS). The 3D printing company Made in Space has partnered with NASA to send their Additive Manufacturing Facility (AMF) to the space station on a launch scheduled to take place next Tuesday. Users on Earth can pay to use AMF, a 3D printer specially designed to operate in a microgravity environment, to print products on the space station. Once it arrives, Made in Space will be able to command AMF remotely from their headquarters in the NASA Ames Research Park. Spencer Pitman, head of product strategy at Made in Space, told TechCrunch that the company has already secured 20 paying customers for AMF. Their customers include high schools that are hosting space-related design challenges, universities that will print medical research components, and companies that will print commercial parts for satellites and other spacecraft.   Cont'd...

3D Printing Reboot

Dana Blankenhorn for SeekingAlpha:  While many people consider 3D printing dead, given what has happened to the stocks of industry leaders such as 3D Systems, Stratasys, ExOne and voxeljet , it's more accurate to say the industry has rebooted and is preparing for another run. This means the industry's excitement is now coming from college campuses and startups. As an investor you want to keep an eye on this, but withhold your investment. Industry leader 3D Systems has been drawing a bid this year as it  undergoes a restructuring, bringing in more professional management, anddropping the Cube, its consumer printer, from the product line. For all of 2015 it reported a loss of $664 million, $5.85/share, on revenues of $666 million. The stock, which once traded as high as $96/share during the last boom, is now at around $13, but it had been as low as $6.42 in mid-January. Founder Charles Hull, 76, has been kicked upstairs to a Chief Technology Officer role.   Cont'd...

America Makes and ANSI Launch Additive Manufacturing Standardization Collaborative

America Makes, the National Additive Manufacturing Innovation Institute, and the American National Standards Institute (ANSI) today announced the launch of the America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC). The purpose of the AMSC will be to coordinate and accelerate the development of industry-wide additive manufacturing standards and specifications consistent with stakeholder needs and thereby facilitate the growth of the additive manufacturing industry. Participation is open to any interested person. The catalyst for the AMSC is the fact that a number of standards developing organizations are engaged in standards-setting for various aspects of additive manufacturing, prompting the need for coordination to maintain a consistent, harmonized, and non-contradictory set of additive manufacturing standards. Full Press Release:

4D-Printed Concept Car Will Predict Your Wishes

Viknesh Vijayenthiran for Discovery News:  New materials will also play a significant role in the further evolution of the car, according to BMW. This has already started with the increasing use of carbon fiber and other composites instead of conventional steel. Looking further forward, technologies such as rapid manufacturing and 4-D printing (3D-printed materials that change depending on conditions) will open up new possibilities. One of the more interesting aspects of the concept is a technology called Alive Geometry which consists of 4D-printed components that can change their shape and interact with the driver.   Full Article:

Records 136 to 150 of 235

First | Previous | Next | Last

Additive & 3D Printing - Featured Product

Bitflow is the leader in CoaXPress

Bitflow is the leader in CoaXPress

With the introduction of its Cyton and Karbon CXP frame grabbers, BitFlow has established itself as the leader in CoaXPress (CXP), a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. With CXP, video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data). BitFlow CXP frame grabbers open the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.