Talking FABTECH 2017 with Turck

We'll be showcasing a smaller 4 mm nut sensor, an aramid fiber high temperature and flame resistant cordset, and the recently released TBIP CIP Safety Hybrid Block I/O Module.

Special Tradeshow Coverage for FABTECH 2017

FABTECH 2017 will be held from November 6th - 9th in Chicago, Illinois. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.

Records 1 to 2 of 2

Featured Product

Bitflow is the leader in CoaXPress

Bitflow is the leader in CoaXPress

With the introduction of its Cyton and Karbon CXP frame grabbers, BitFlow has established itself as the leader in CoaXPress (CXP), a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. With CXP, video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data). BitFlow CXP frame grabbers open the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.