Huawei advances its Smart Factory push with 5G-based Robot as a Service
Guy Daniels for TelecomTV: Their joint aim is to promote the digital transformation of the manufacturing industry with 5G slicing technology, as well as further Huaweis ongoing commitment to what it calls the Smart Factory.
5 ways to advance robotics in manufacturing
Stephanie Condon for ZDNet: The maturity of automated technology used in manufacturing is all over the map, says Carnegie Mellon Prof. Howie Choset, but there are concrete ways to fix that.
Introducing Myriad X: Unleashing AI at the Edge
Remi El-Ouazzane for Intel: The First Vision Processing Unit with a Dedicated Neural Compute Engine will Give Devices the Ability to See, Understand and Interact with the World Around Them in Real Time
IIoT Deployments to Double: Manufacturers Reinvent Themselves with New Technologies
Dick Weisinger for Formtek: But a survey by ABI Research found that 74 percent of companies are investigating and planning to deploy IoT within the next 12 months. Over that period, IIoT deployments are expected to double.
Amazon robots bring a brave new world to the warehouse
Michael Pooler for FT.com: An industrial dance takes place every day and night on the floor of Amazons huge warehouse in Manchester.
Laser ultrasound: the future of metal 3D printing?
Nell Walker for Manufacturing Global: Using laser ultrasound rather than camera imaging, it is hoped that Duttons work could encourage the use of 3D printing within mass manufacturing industries, as it removes the need for a separate inspection process.
Has IIoT Become the Norm Across All Industrial Sectors? Industry Experts Say
Larry Turner for Industry Week: Industry experts agree, it makes sense to start now and to make small steps towards the big idea of IIoT. Partnerships can help the process.
Small Town America's Newest Product: Advanced Manufacturing
Harold L. (Hal) Sirkin for Forbes: People with skills and talent typically gravitate to "superstar cities," such as New York and Los Angeles, or to "knowledge and tech hubs" like Boston, San Francisco, Seattle and Washington, D.C., not to small towns in the South.
Defending 3D Printers From Hackers
Charles Q. Choi for IEEE Spectrum: Researchers reveal three methods of verifying that 3d-printed parts have not been compromised by someone hacking the printer itself.
Space-Based 3-D Printing Reaches Milestone
Mike Wall, SPACE.com: A 3D printer built by the California-based company Made in Space churned out multiple polymer-alloy objects - the largest of which was a 33.5-inch-long (85 centimeters) beam - during a 24-day test inside a thermal vacuum chamber (TVAC) here in Silicon Valley at NASA's Ames Research Center in June.
Foxconn's Wisconsin plan raises skepticism as well as hope
Rick Barrett, Milwaukee Journal Sentinel: The magnitude of Foxconn Technology Groups proposal for a $10 billion electronics factory in southeast Wisconsin is matched by the gravity of the questions it has raised
Voodoo Automates 3D Printing to Take on Injection Molding
Michael Molitch-Hou for Engineering.com: With Project Skywalker, Voodoo Manufacturing was able to automate an important part of its manufacturing process.
Toward additive manufacturing
Phys.org: Although additive manufacturing has been around since the 1980s, the technology has advanced rapidly over the past few years.
100x faster, 10x cheaper: 3D metal printing is about to go mainstream
Loz Blain for New Atlas: Desktop Metals Studio System includes a fully-automated, office-friendly sintering furnace with fast cycle times and a peak temperature of 1400°C, allowing for the sintering of a wide variety of materials
How GE Appliances Built an Innovation Lab to Rapidly Prototype Products
Harvard Business Review: Midway through 2014, GE Appliances launched FirstBuild - a GE-equipped innovation lab and micro-factory - to augment the strengths of a long-established company with those of an entrepreneurial startup. Separation is the key.
Records 691 to 705 of 1076
First | Previous | Next | Last
Featured Product
Get RFQs on Die Casting, Stamping, and Extrusion With Xometry, Your Source for Custom Parts
Xometry is your source for custom parts. Now, in addition to getting instant quotes on 3D Printing, CNC Machining, Sheet Metal, and Injection Molding, customers can create and send RFQs for die casting, stamping, and extrusion work to our nationwide network of pre-vetted manufacturers with just a 2D drawing. You will receive and be able to review responses from qualified shops within 7 days on an advanced web-based RFQ management platform. To learn more go directly to our site to issue and RFQ today. Stop wasting time managing RFQs through email and by phone, and start issuing RFQs at scale and in the cloud.
