Winning Design of Mouser Electronics' International Space Station Design Challenge Is 3D-Printed in Space
Mouser Electronics Inc. and Grant Imahara today announced that the winning design in the International Space Station (I.S.S.) Design Challenge has been 3D-printed in space. The winning design, a satellite-launching device, is now in orbit and may one day be used by astronauts for a variety of missions.
Advanced Manufacturing Expo 2017 to be Held in Grand Rapids and Metro Detroit, Expands to Include a New Hall of Metalworking
The Advanced Manufacturing Expo is holding events in Grand Rapids and metro Detroit in August that highlight solutions that manufacturers throughout Michigan can use to improve productivity and profitability.
Boeing turns to 3D-printed parts to save millions on its 787 Dreamliner
Lucas Mearian for ComputerWorld: Boeing will begin using at least four 3D-printed titanium parts to construct its 787 Dreamliner aircraft and may some day rely on as many as 1,000 parts created via additive manufacturing.
Siemens and Materialise Technology Integration Streamlines Product Design Through 3D Printing
Materialise additive manufacturing technology now fully integrated with NX Seamlessly closes the loop between product design and 3D printers Strengthens Siemens comprehensive additive manufacturing solution
Winners of IDTechEx Launchpad Announced
In its small way, the IDTechEx Launchpad aims to help the best emerging technologies get international exposure to technology scouts and product managers from large corporations across many industries.
Insert Molding vs Traditional Injection Molding
A typical application of insert molding is to include one or more threaded metal inserts in a plastic part when that part is intended to mate to another part in an assembly.
Siemens and Materialise Technology Integration Streamlines Product Design Through 3D Printing
Materialise additive manufacturing technology now fully integrated with NX
Seamlessly closes the loop between product design and 3D printers
Strengthens Siemens comprehensive additive manufacturing solution
WPI to Play Critical Role in National Manufacturing Initiative
University is a participating member in eight Manufacturing USA institutes;
Each institute to be awarded $70 million in federal funds, which must be matched with non-federal support
Adidas reveals the first 3D-printed shoe it'll mass-produce
James Vincent for The Verge: The company says 100,000 pairs of Futurecraft sneakers will be made by the end of 2018
MLC CAD Systems' Partner 3D Systems Announces Advance in Metal and Plastic Solutions
The MultiJet Wax family has expanded with the new ProJet MJP 2500W and VisiJet M2 CAST RealWax materials. This next generation wax technology will deliver high-resolution and durable patterns for industrial casting.
McLaren Formula 1 Racing Deploys Stratasys Additive Manufacturing to Improve 2017 Car Performance
-Stratasys FDM and PolyJet 3D Printing Solutions are being used to produce final 3D printed race-ready parts for the new McLaren MCL32 race car, as well as manufacturing tooling to advance production
-3D printing will also be used at trackside to produce parts and tooling on demand for immediate evaluation during tests and races
-Goal is to bring new car developments earlier by moving from idea to component in a shorter timeframe
Additive Manufacturing Users Group Names Technical Competition Winners
A panel of industry veterans selected Mike Littrell of CIDEAS, Inc. and Vince Anewenter of Milwaukee School of Engineering as winners of the annual Technical Competition.
Additive Manufacturing Users Group Awards DINOs
AMUG presented ten DINO (Distinguished INnovator Operator) Awards to recognize industry veterans for years of experience, contributions back to the additive manufacturing industry, and active support of the users group.
New Research Could Help Speed Up the 3D Printing Process
Binghamton University for R&D Magazine: A team of researchers from Binghamton University, State University of New York and MIT have identified some bottlenecks in 3D printers, that, if improved, could speed up the entire process.
Additive Manufacturing Users Group Announces New Board
Paul Bates will lead the elected and appointed officers of the users group in preparing for the 2018 AMUG Conference.
Records 3556 to 3570 of 5007
First | Previous | Next | Last
Additive & 3D Printing - Featured Product
BigRep ONE: Large-Scale 3D Printing
The BigRep ONE is an award-winning, large-format 3D printer at an accessible price point. With over 350 systems installed worldwide, it's a trusted solution for prototyping and production by designers, innovators, and manufacturers alike. Featuring a massive one-cubic-meter build volume, the fast and reliable ONE brings your designs to life in full scale.
Manufacturing and Automation - Featured Company
MRPeasy
MRPeasy is a seriously powerful and easy to use ERP software for small manufacturers that gives you everything you need to manage your manufacturing and distribution processes. Integrating sales, procurement, inventory, production, finances, and your team, it provides you with an accurate real-time overview of your operations.
MRPeasy is trusted by 2000+ small manufacturers worldwide, 700+ of which are based in the US and Canada. Our users report a 54% average improvement in the overall performance of their business and a 42% increase in on-time deliveries.
Try for free, no credit card needed.
