This 3D-Printer Uses Holograms for Super-Fast Printing
Patrick Lynch for Arch Daily: One established 3D-printing technique is using laser to cure light-activated plastic, building up layers one at a time in a time-consuming process. But now tech start-up Daqri has discovered a way of speeding up that process: by using a 3-dimensional hologram. The printer works by projecting a 3D light field into a dish of the light sensitive monomer “goo.” The plastic quickly hardens, allowing it to be extracted using a screen. The whole process takes just 5 seconds, compared to the several minutes than would be required by an ordinary 3D printer.
In addition to its increased speed, the printer also creates monocoque objects that don’t suffer from the weaknesses found in the “grain” between layers of 3-D objects. The process would also eliminate the need for supporting structures currently required to create some 3D objects. Cont'd...
Electro-Mechanical Assembly Press Technology Moves Li-Ion Battery Manufacturer A Step Closer To Perfection
Promess became involved with the battery manufacturer when the hydraulic presses, originally specified for both the pressing and assembly operations, proved to be unable to deliver the level of consistent process control required.
Successful Mechatronics Program at Vaughn College
Mechatronics is an exciting major for students because it combines computer, mechanical and electrical engineering into one field of study.
Campofrio Food Group Leads the Way in Digitization with Cisco Connected Factory Solution
Marketwired: Campofrío Food Group, the leading international producer of branded processed meats, headquartered in Madrid, Spain, has cut the ribbon on a brand-new plant that boasts the latest in digital technology.
With a gross surface area expanding 99,000 square meters and an estimated production of 101,400 tons a year, the 'New Bureba' plant is located in Burgos, in Northern Spain. It replaces the previous facilities, destroyed by a fire in November 2014, but is far from a standard rebuild, incorporating the industrial sector's very latest innovations.
From the beginning of the design process, Campofrío seized the opportunity to create a 'smart' factory that connects machines, devices, sensors and people in real-time. The company selected Cisco Connected Factory solution to create a 'Factory 4.0' that would enable to manage and optimize its business processes and make well-informed decisions. Cont'd...
MakerBot is laying off a third of its staff, narrowing focus under Stratasys
Shawn Knight for TechSpot: 3D printing ordinary household goods may be able to save users a bit of coin but consumers aren’t buying it – literally – and that’s forcing one company to downsize its workforce.
In what is becoming a common occurrence, MakerBot recently announced additional restructuring that’ll see the company shed 30 percent of its staff.
CEO Nadav Goshen said greater focus on long-term goals is key to their success and to get there, they must reduce the “pressure and distraction” of chasing short-term market trends and focus on their core products.
The executive didn’t say which divisions would be hit hardest, nor do we know exactly how many employees are being let go although TechCrunch estimates the figure is probably between 80 and 100.
Specifically, MakerBot will be integrating hardware and software product development under one team that’ll be led by VP of Engineering Dave Veisz. Current Director of Digital Products, Lucas Levin, is also being promoted to VP of Product, we’re told, and will lead product management across hardware and software. Cont'd...
Vaquform: The World's First Digital Desktop Vacuum Former
The Vaquform is a Kickstarter project that hopes to add some digital technology to vacuum forming and also bring an industrial level of quality to your desktop.
It goes far beyond the LCD interface. Vaquform brings high-end process control to desktop vacuum forming, turning it into a smart appliance fit for a modern engineering lab, design office, or artist studio. Kickstarter page:
State-of-the-art Motion Control and Electronics for Sorting Line
The sorting and packaging of small, medium and large ceramic formats represent a crucial phase in the manufacturing process.
Beyond the Hype: What's Next for Industrial 3D Printing
Vicki Holt of Proto Labs via The Huffington Post: It wasn’t long ago that 3D printing was one of the buzziest technologies around. We watched as a 3D printer recreated a bust of Stephen Colbert on TV. We heard from industry analysts who were bullish on adoption of the technology. We imagined a future with a 3D printer in every home when major retailers began selling them online and in stores.
Fast forward to today. The potential of 3D printing remains enormous. Global spend on the technology is expected to climb from $11 billion in 2015 to nearly $27 billion in 2019. But with all of the early excitement now behind us, where does 3D printing stand today? And where will it go in the future? It can be summed up in three key developments. Cont'd...
Closing US Manufacturing Trade Deficit Would Create 1.3M Jobs, Says Tech Think Tank
The prevailing narrative says automation was the main culprit behind U.S. manufacturing job losses in the early 2000s, and that automation is now powering an unprecedented manufacturing technology revolution that will continue to displace jobs. But a new report from the Information Technology and Innovation Foundation (ITIF) finds that both of these claims are false.
ITIF, a leading tech-policy think tank, finds that trade pressure and faltering U.S. competitiveness were responsible for more than two-thirds of the 5.7 million manufacturing jobs lost between 2000 and 2010. And rather than entering a "fourth industrial revolution," U.S. manufacturing productivity growth is actually near an all-time low. In light of these facts, ITIF concludes that U.S. policymakers should aim to close the country's trade deficit in manufactured goods by fighting foreign mercantilism and pursuing a national competitiveness agenda that hinges in part on boosting manufacturing productivity rates. The report estimates that successfully closing the manufacturing goods trade deficit this way would create 1.3 million jobs. Full Press Release:
Industry 4.0 Ushers in a New Era of Manufacturing Intelligence
Industry 4.0 and the Internet of Things are far more than technology buzzwords; instead the possibilities of these technologies are almost impossible to imagine and overestimating their potential is difficult.
Manufacturers raise investment in next-gen tech, survey says
Dustin Walsh for Crain's Detroit Business: U.S. manufacturers are rapidly boosting investment in advanced digital technologies, according to a survey to be released Monday by Troy-based technology business association Automation Alley. The survey coincides with the association's 2017 Technology Industry Outlook event on Feb. 13 at the Detroit Institute of Arts. Nearly 400 manufacturing and technology business leaders are expected to attend.
According to the survey, 85 percent of U.S. manufacturing executives responded they plan to increase existing budgets for new technologies, with nearly a third planning to increase budgets by up to 15 percent. More than half of the respondents said they have a dedicated budget to technologies described as Industry 4.0, with the top three being cloud, cybersecurity and data analytics. Cont'd...
S. Korea's Hanwha to develop smart factory platform
Pulse News: South Korea’s leading conglomerate Hanwha Group plans to venture into the smart factory business, joining the burgeoning market dominated by General Electronics Co. (GE) and Siemens AG in the transitional age of industry and society heading towards full automation and practical robotics applications.
According to a senior official at Hanwha Wednesday, the group recently formed a task force team dedicated to the development of hardware and software that can help to make factories smarter, cost-efficient, and more productive through increased computing systems. Hanwha Techwin Co., the group’s defense and aircraft engine making unit, will first come up with a pilot model in automating factories that would be applied to other manufacturing subsidiaries. Cont'd...
Mitigate Risk with Flexible Automation
Self-driving vehicles (SDVs) break free of magnetic strips and pre-programmed routes, unlike their autonomous guided vehicle (AGV) brethren
Oerlikon expands additive manufacturing R&D and production capacity in the US
Oerlikon announced today that it is expanding its global additive manufacturing (AM) business with a state-of-the-art R&D and production facility for additively manufactured advanced components in the Charlotte metro area in North Carolina, USA. Oerlikon will invest around CHF55million in this facility in 2017 and 2018, and expects to create over 100 new jobs at this site over the longer term.Â
As part of Oerlikon's strategy to become a global powerhouse in surface solutions and advanced materials, the Group has identified additional growth areas such as additive manufacturing, which leverages its strong materials heritage, service reputation, access to markets, applications across industries and core competence in intelligently engineering and processing advanced materials and surface technologies. Â Full Press Release: Â
Â
Stratasys launches new rapid prototyping Engineering-Grade 3D Printing Solution: The F123 Series
"Today there is a vast market opportunity in product prototyping that we feel is not being addressed by current 3D printing systems. The launch of the Stratasys F123 Series targets these product design workgroups, industrial designers, engineers, students and educators who demand a professional quality rapid prototyping solution that's simple to use, produces reliable, engineering-quality results, integrates perfectly within an office or lab setting, and is affordable to own and operate," said Zehavit Reisin, Vice President, Head of Rapid Prototyping Solutions, Stratasys. "As the company that invented FDM, Stratasys brings a rich pedigree to the F123 Series, providing our customers an optimal balance between usability and high performance." Full Press Release.
Records 2386 to 2400 of 2887
First | Previous | Next | Last
Featured Product
Prototek IQ - Digital Manufacturing Services
Prototek IQ is our new instant quoting platform that simplifies your manufacturing process. With just a few clicks, you can get accurate quotes for 3D printing and CNC machining, which are currently two different platforms. Our easy-to-use interface helps you make smart choices. Use Prototek IQ to improve efficiency and streamline speed to market. We invite customers with experience in large projects, 3D printing, and CNC machining, as well as those with repeat orders, to try our instant quoting platform. You can choose our engineer-assisted quote option if you have unique needs, such as high quantities, specific quality standards, fast delivery, or special finishes.
