Inaccuracies with Motors and Drivers: Who is the Culprit?
Is Your Step Motor and Driver Contributing to the Inaccuracy of Your System?
Delta buys Unicom to advance smart factories
Christine Chou, The China Post:  Delta Electronics, a provider of power management solutions, will acquire a 100 percent stake in industrial software provider Unicom (ç¾½å† ) for NT$351 million (US$10.9 million).Â
In a bid to speed up its smart manufacturing operations, Delta Electronics' board of directors agreed on Friday to acquire Unicom - merging the leading Computer-Integrated Manufacturing (CIM) software provider into a wholly-owned subsidiary of Delta.
Unicom, which specializes in Manufacturing Execution Systems (MES), has been providing solutions to streamline factory management and equipment monitoring for almost 20 years.
Delta Electronics chief executive officer Cheng Ping said with the arrival of the internet of things, manufacturers must move towards smart production to adapt to changing market demands.
The development of core technologies and systems for smart manufacturing requires cross-disciplinary cooperation to speed up the transition and seize market opportunities, Cheng said. Â Cont'd...
Disruption Ahead: Automotive Manufacturers Look to the Future
Automotive manufacturers are seeking ways to simultaneously embrace big data, stay flexible, and continue to innovate ahead of fellow automakers and new competition from Silicon Valley.
Strategies to Strengthen Subassembly Sourcing
Selecting subassembly manufacturers with specific capabilities can speed turnaround, improve product performance and functionality, and increase an OEMs bottom line.
How Industry 4.0 is changing human-technology interaction
Ben Rossi for InformationAge: Â Accelerated by technologies such as 3D printing and intelligent robots, the role of the human machine interface (HMI) is becoming more sophisticated.
This is altering the way industries approach increasingly complex processes of machines and systems in order to improve efficiency and decrease downtime.
Industry 4.0 and the Internet of Things (IoT) are at the centre of new technological approaches, development, production and the entire logistics chain - otherwise known as smart factory automation.
HMI is implemented in any industry where human intervention with a machine or automated device is necessary. The high rate of demand for HMI is being driven by the need for enhanced efficiency, data security and compliance, mobility, remote services and reliable hardware. Â Cont'd...
Siemens to buy Mentor Graphics amid push to digitize factories
By Christopher Alessi and Natascha Divac, Dow Jones Newswires: Siemens AG’s planned acquisition of automation and industrial software provider Mentor Graphics Corp. is the German giant’s latest play to stay competitive in the race to digitize heavy industry.
Siemens on Monday offered $37.25 a share in cash, equivalent to a 21 percent premium on Mentor’s closing share price on Friday, giving the U.S. company an equity value of around $4 billion.Wilsonville, Ore.-based Mentor, which has agreed to the acquisition, sells software and hardware design-automation tools for the development and testing of advanced electronic systems. The company has a field office in Longmont. Mentor’s shares gained 18.3 percent to $36.30 in recent Nasdaq trading on Monday.
“It’s a perfect portfolio fit to further expand our digital leadership and set the pace in the industry,” Siemens CEO Joe Kaeser said. Cont'd...
A Complete Review of Semiconductor Lasers And a Few Words About What You Can Do With a 5.6 W Semiconductor Laser
This is a detailed article about popular inexpensive semiconductor lasers and about what you can engrave and cut using a 5.6 W semiconductor laser, installed on a 3D printer or CNC machine.
Seebo and Autodesk Forge Team Up to Help Product Developers Launch Connected Devices
This comprehensive software solution streamlines the entire smart product development process, dramatically decreasing development time and costs.
High Efficiency Motors
To understand the concept of high efficiency motors, you must first know how to calculate efficiency and the losses associated with the motor components themselves.
Trump promises to bring back manufacturing jobs, but robots won't let him
Lora Kolodny for TechCrunch: For Americans struggling with stagnant wages, under- or un-employment, one of Donald Trump’s most appealing campaign promises was to bring manufacturing jobs back to the U.S.
Navigating the complexities of policy, tariffs and geopolitics would make that hard enough already for the president elect. But technology will make this promise nearly impossible to fulfill.
Why? Because manufacturing jobs are increasingly done by robots, not people.
Robotics have already helped reduce reliance on labor overseas for manufacturers in automotive, electrical and electronics industries, according to a fresh policy report from the United Nations Conference on Trade & Development. Cont'd...
CNC Inspection Software Reduces Time Needed to Machine Composite Parts
PowerInspect has dramatically improved our ability to locate and align parts with complex curved surfaces
Lift Gate Provides Added Flexibility to SmartFlex System
With a typical lift gate conveyor, the entire conveyor pivots using the motor as a counter balance and a gas strut to assist in the lifting process.
For Visio, PDF is the new DWG
During discussions with the Visio product team I realized that PDF is the new intermediate file format for Visio, not DWG. For example, PDFs from AutoCAD are plotted at a specific paper size and scale, perfect for Visio.
6 machine learning misunderstandings
Ryan Francis for NetworkWorld: Machine learning isn’t confined to science fiction movie plots anymore; it’s fueled the proliferation of technologies that touch our everyday lives, including voice recognition with Siri or Alexa, Facebook auto-tagging photos and recommendations from Amazon and Spotify. And many enterprises are eager to leverage machine learning algorithms to increase the efficiency of their network. In fact, some are already using it to enhance their threat detection and optimize wide area networks.
As with any technology, machine learning could wreak havoc on a network if improperly implemented. Before embracing this technology, enterprises should be aware of the ways machine learning can fall flat to avoid setting back their operations and turning the c-suite away from implementing this technology. Roman Sinayev, security intelligence software engineer at Juniper Networks, cites ways to avoid the top machine learning missteps. Cont'd...
Time for Monumental Thinking in Additive
Karen Haywood Queen for AdvancedManufacturing.org: The limits of CAD and CAE tools and the STL file format are holding manufacturers back
As additive manufacturing emerges from a long infancy, the industry is grappling with a key challenge: A file format and design tools from the 20th century are being asked to do 21st century jobs.
“The industry was a hobby industry for 25 years and it’s starting to grow up,” said Kirk Rogers, technology leader at GE.
“You made a 3D model and it had a cool factor—Mickey Mouse or a little chess piece—it was awesome to look at,” said Kenneth Church, CEO of the R&D engineering firm Sciperio, as well as the 3D printing firm nScrypt. “What if I made it functional? Cont'd...
Records 1771 to 1785 of 1954
First | Previous | Next | Last
Featured Product
OnLogic's Helix 520 Series of Scalable Fanless Computers
The Helix 520 series utilizes the latest Intel Core Ultra processors with integrated edge AI capabilities to deliver exceptional performance and industrial-grade reliability for demanding applications in automation, robotics, machine vision, and more. Its unique modular design allows for flexible scaling of CPU and GPU performance, while robust connectivity and expansion options ensure seamless integration.
