ExOne Licenses Method of 3D Printing Lightweight Ceramic-Metal from Oak Ridge National Laboratory

-ExOne to commercialize production of parts 3D printed in aluminum-infiltrated boron carbide -The functional 3D printed material has a wide range of potential applications -ExOne to begin 3D printing collimators and other parts for ORNL in the new material

Diode Lasers in CNC and 3D Printing

Our lasers are mainly plug and play for any 3D printer or CNC machine. They work out of 12-24V and have a TTL wire that has to be connected with PWM and then you are pretty much set.

Promoting Safety & Sustainability in the AM Process Chain

From a 6-mile high view of the world, the AM process is less wasteful than conventional subtractive manufacturing processes, and allows for improved resource efficiency.

HP 3D Print Design Competition

Color is opening up a world of new possibilities for 3D printing. It's helping surgeons create models to prepare for surgery, allowing manufacturers to develop better parts, and enabling customization not previously possible.

Specialty Materials for 3D Printing

Specialty materials that have different mechanical, thermal, chemical, temperature, and conductive properties will continue to enable use cases where designs can be further optimized through the specification of specialty materials that best suit the part requirements.

Diode Laser on your 3D Printer, Perfect Tool for Makers?

3D printers are amazing for makers everywhere, as they enable easy, cheap, and fast progress on projects. They can't do everything though, especially if you want a different material from plastic, you're for the most part out of luck.

DSM launches I AM Tomorrow Challenge to drive innovation in 3D printing

Launched in collaboration with HighTechXL, Hexagon, and Ultimaker, the challenge offers select companies a spot in a ten-week acceleration program designed to launch or mature their businesses.

Switching to Biobased Plastics: IDTechEx Research Asks Why So Slow?

Transitioning to a biobased manufacturing economy has been demonstrably difficult to date; however, there are signs that governments are introducing policy initiatives to overcome some of these challenges.

Moving Beyond Prototypes

Can 3D printing be used in the manufacture of safety critical vehicle parts?

Electrostatic Discharge (ESD) Safe Materials for 3D Printing

There are three primary uses for ESD safe plastics: electronics manufacturing (e.g. ESD safe jigs and fixtures for printed circuit board manufacturing), materials in a combustible/explosive environment, and nuisance static charge elimination

SME, Stratasys Announce Winners of FANUC-Inspired SkillsUSA Additive Manufacturing Competition

SME created the Additive Manufacturing Competition to attract and introduce the younger generation to emerging technologies that manufacturers have adopted over the past few years.

The Business Case for Metal AM

The growing number of industrialisation questions are indicative of a growing maturity in the marketplace. AM machines are moving out of prototyping applications and research laboratories and into mainstream production manufacturing.

STANLEY+Techstars Accelerator Announces Second-Annual Class

- 2019 Accelerator continues focus on additive manufacturing and expands to include sustainable packaging solutions. - Selected companies will relocate to Stanley Black & Decker's new Manufactory 4.0 Center in Hartford, CT for three months

U.S. Army Research Lab Selects 3D Systems to Develop World's Largest, Fastest Metal Powder 3D Printer

United States government invests $15 million towards the development of the next generation of metal 3D printing technology - advancing U.S. competitiveness and national security.

Industry 4.0 Strategy and Design for Additive Manufacturing

With all the buzz about these new design tools, there is still quite a bit of ground left to be covered in ensuring these next-generation designs are actually manufacturable. That is where we can really shine.

Records 1 to 15 of 512

Next | Last

Additive & 3D Printing - Featured Product

The Endurance flagship 10 watt (10000 mW) diode laser module.

The Endurance flagship 10 watt (10000 mW) diode laser module.

The Endurance 10 Watt laser - "Invincible" continuous power. Engraves on stainless steel, copper and brass. Cuts 4-5 mm (1/6'') wood and plywood with just one pass. Cuts 8 mm (1/3'') dark acrylic with 2-3 passes. Compatible with almost all 3D printers and CNC machines. We deliver everything you need to get started. The "Invincible" laser enables to create incredible things with your 3D printer / CNC machine. Unlike many Chinese lasers the Endurance 10 watt laser can work continuously up to 48-72 hours. Its lifetime is about 10 000 hours. Its real rated optical power output of is 10 watt (10000 mW). Endurance provides an ultimate customer support with full guidance and tutorials. Learn more about the laser: https://www.youtube.com/watch?v=kM-utYFYvFk