DFAM: WHY PURPOSEFUL GEOMETRY MUST REPLACE PASSIVE OPTIMISATION

Rather than embracing the full potential of AM, many engineers merely adapt existing designs or lean heavily on software-driven outputs, confusing automation with optimisation.

Swagway Teardown: What Makes a Safe Hoverboard?

From Andrew Goldberg at Ifixit.org: The board is also smart enough to not drive around without you. Riders need both feet firmly planted on the board or it won’t be going anywhere. Just how does the board know you’re properly mounted? Each foot pad has two infrared sensors—one at the toe, one at the heel. Stepping down on the pad pushes a peg between emitter and receiver. Only when all four sensors are blocked are you ready to roll... ...Those sensor switches live on the backs of the two gyro boards—one for each wheel. These boards are largely responsible for the “smart” part of smartboard. Each board is home to an Invensense MPU6050 6-axis gyroscope+accelerometer, and a GigaDeviceGD32F130 ARM Cortex-M3 32-bit microcontroller (thanks, Ken!). The ARM chips are responsible for reading the infrared switches, controlling the sweet underglow headlights and top-mounted indicator LEDs, and collating and sending data from the MPU6050 to the main board (more on that later)... ( full article )  

Records 1 to 2 of 2

Featured Product

Cold air to -50°F (-46°C) from your compressed air supply — with no moving parts!

Cold air to -50°F (-46°C) from your compressed air supply - with no moving parts!

A low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. Vortex tubes can produce: • Temperatures from -50° to +260°F (-46° to +127°C) • Flow rates from 1 to 150 SCFM (28 to 4248 SLPM) • Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.) Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust. EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation. https://exair.co/184_530