UK 'risks losing out in Industry 4.0 race'
By PRW: A leading trade body has warned that a lack of government planning was threatening the UK’s position at the forefront of Industry 4.0, also known as the fourth industrial revolution.
A number of plastics companies in the UK and on the Continent have begun to develop products and processes that take into account developments in and around Industry 4.0 – also known as the ‘Internet of Things’.
However research conducted by manufacturers’ organisation the EEF found that while 91% of companies surveyed believed that internet access was as important to their business as electricity and water supplies more than half reckoned connectivity was inadequate for the future.
While the awareness of how important the internet was to a company’s operation was seen as a positive, the EEF highlighted that poor digital connectivity may prove to become a drag on future growth.
Many companies were already having to pay a premium to ensure they had high-speed access, the trade body said. Cont'd...
Boy, do Fanuc and Cisco have a deal for your factory
Fanuc and Cisco Systems are set to commercialize a technology this summer that promises glitch- and disruption-free factory operations. The Internet of Things-based system monitors machinery and spots signs of possible abnormalities so that parts can be replaced more smoothly and without affecting operations.
A one-minute suspension at a car factory generally costs around 2 million yen ($16,900). If, for example, a gear breaks and operations are halted for 60 minutes to replace it, the costs would be 120 million yen. Frequent line stoppages could also affect product quality.
The Fanuc-Cisco system uses sensors attached to each robot carrying or welding parts to monitor temperatures, vibration and other conditions. Data streams are sent via the Internet. A computer analyzes the data and decides which parts will likely need fixing and when. The system also places orders for replacements. The accuracy of the system's prediction and analysis functions will increase as data accumulates, representatives from the companies said. Cont'd...
U.S. official sees more cyber attacks on industrial control systems
Jim Finkle for Reuters: A U.S. government cyber security official warned that authorities have seen an increase in attacks that penetrate industrial control system networks over the past year, and said they are vulnerable because they are exposed to the Internet.
Industrial control systems are computers that control operations of industrial processes, from energy plants and steel mills to cookie factories and breweries.
“We see more and more that are gaining access to that control system layer," said Marty Edwards, who runs the Department of Homeland Security's Industrial Control Systems Cyber Emergency Response Team, or ICS-CERT.
ICS-CERT helps U.S. firms investigate suspected cyber attacks on industrial control systems as well as corporate networks.
Interest in critical infrastructure security has surged since late last month when Ukraine authorities blamed a power outage on a cyber attack from Russia, which would make it the first known power outage caused by a cyber attack. Cont'd...
Thoughts turn to revolution in Davos
By Matthew Allen for SWI: Intelligent robots and drones, 3D printers, self-driving vehicles, data mountains, smart production lines, fintech and blockchain – the fourth industrial revolution is here. The World Economic Forum’s (WEF) annual Davos meeting will ponder the potential, limitations and societal impacts of “Industry 4.0”.
Will the transformation of the workplace create jobs or unemployment? Will it close the gap between industrialised and developing economies, rich and poor - or widen it? For Swiss firms, can the new technological revolution ease the pressures of the strong franc?
Speaking ahead of the annual meeting in Davos, WEF founder Klaus Schwab called on world leaders to revise policies to accommodate the coming changes. “We are not yet sufficiently prepared for this fourth industrial revolution that will come over us like a tsunami and will change whole systems,” he said.
“My fear is that if we are not prepared we will create a world where particularly the middle class is frozen out. That would lead to a new problem of social exclusion that we absolutely have to avoid.” Cont'd...
For Advanced Manufacturing, Success Demands Innovation, Education and Public-Private Partnership
MICHAEL D. WHEELER for Photonics.com: Global manufacturing has undergone enormous changes in the past decade as many developing countries have joined the club of tier-one manufacturing nations, a recession stalled demand, and employment fell precipitously in leading economies. Yet manufacturing remains critical to the future of both developing and advanced worlds, driving innovation, productivity and competitiveness, and offering a pathway out of poverty.
Recent attention has focused on “advanced manufacturing,” which replaces traditional labor-intensive processes with ones based on the newest technologies. It encompasses a family of activities that depends on information, computation, software, sensing and networking, while making use of cutting-edge materials and emerging capabilities such as nanotechnology.
Advanced manufacturing is an especially potent propellant of future economic growth, distinguished by continual process improvement and rapid new product introduction. These critical features will lead to the building of lighter, more fuel-efficient automobiles, the creation of “needleless” tests for medical conditions like diabetes, and the fabrication of semiconductors with 10 times the current processing power. Cont'd...
What Robots and AI Learned in 2015
By Will Knight for MIT Technology Review: The robots didn’t really take over in 2015, but at times it felt as if that might be where we’re headed.
There were signs that machines will soon take over manual work that currently requires human skill. Early in the year details emerged of a contest organized by Amazon to help robots do more work inside its vast product fulfillment centers.
The Amazon Picking challenge, as the event was called, was held at a prominent robotics conference later in the year. Teams competed for a $25,000 prize by designing a robot to identify and grasp items from one of Amazon’s storage shelves as quickly as possible (the winner picked and packed 10 items in 20 minutes). This might seem a trivial task for human workers, but figuring out how to grasp different objects arranged haphazardly on shelves in a real warehouse is still a formidable challenge for robot-kind. Cont'd...
Google to incubate its robotics and drone divisions under Google X
By Mike Wheatley for SiliconAngle: Google is planning an organizational reshuffle that will see its secretive robotics department and drone business folded into its Google X labs.
Google’s robotics division, and the drone group it created when it acquired Titan Aerospace in 2014, will both fall under the Google X umbrella when the reshuffle takes place some time next year, Re/Code reported.
Google X is the secretive part of Google that develops some of its most futuristic, bleeding edge technologies. These include its famous self-driving cars, Project Loon (Wi-Fi hot air balloons), and its airborne wind turbines. Google X operates as a standalone company under Google’s parent Alphabet Inc., which was created following Google’s corporate restructuring earlier this year.
Google X’s projects are largely experimental and extremely uncertain in terms of a business model. Nevertheless, Google obviously deems it the best place to be for its robotics division, which has been left leaderless ever since Andy Rubin quit the Web giant last year. Previously, there was speculation that the robotics division may become a standalone company under Alphabet, but today’s news would indicate that’s not going to happen any time soon. Cont'd...
Building the Steam Controller
From Valve:
When we first started designing hardware at Valve, we decided we wanted to try and do the manufacturing as well. To achieve our goal of a flexible controller, we felt it was important to have a similar amount of flexibility in our manufacturing process, and that meant looking into automated assembly lines. It turns out that most consumer hardware of this kind still has humans involved in stages throughout manufacturing, but we kind of went overboard, and built one of the largest fully automated assembly lines in the US. Our film crew recently put together a video of that assembly line, showcasing exactly why robots are awesome.
Think You Know Industrial Robots? Think Again
Jim Lawton for Forbes: Peter Drucker said “Culture eats strategy for breakfast” and in my experience there’s no industry where that wisdom holds more true than manufacturing. I’m not a hardened cynic, just a pragmatist, having spent the majority of my career bringing technology that disrupts the status quo – from inventory optimization and managing risk in the supply base to collaborative robots. Manufacturers are among the most skeptical buyers and for good reason – what they do is hard, complex and things are done the way they are done because it’s been proven to work. There are times though when the opportunity to transform the business is so compelling that – as Drucker said – executives need to spend whatever time is necessary to tear down the cultural barriers that are getting in the way of the strategy that capitalizes on the moment.
In the category of robotics and industrial automation, now is one of those times. It’s been more than 50 years since Unimate went to work at a GM plant unloading heavy parts and welding them onto automobile frames. Manufacturing has changed a lot and today is on an evolutionary path toward the 4th industrial revolution. Unfortunately, while executives may be ready to move quickly toward the factories of the future for first mover advantage, many automation engineers remain entrenched in 20th century thinking about robots — when they were highly customized solutions, designed to perform one task over and over again, with a price tag to match. Cont'd...
MIP Robotics Launches Its First Model of New Generation Industrial Robot "MIP Junior",
MIP robotics is a startup founded in 2015 and based on research conducted for many years. The company aims to provide accessible, industrial robots, especially for SMIs (small and medium industries). In other words, like 3D printing in recent years, MIP wants to democratize industrial robotics.
The robots can be used to automate repetitive, arduous or dangerous tasks; indeed it is possible to set the standard gripper arms: suction cup, hook, screwdriver, blade etc. Application examples are numerous: storing goods in cartons, checking the tightening torque, making the automated cutting, removing non-compliant products etc. MIP allows its customers to increase their productivity (and hence margins) in order to improve the quality or reduce the hardship. The investment can be made profitable in only 6 month.
The "Junior " is a robot called "SCARA" (that is to say a horizontal arm) operating on a range of 600mm and fixed on a vertical axis in a standard 400mm high. These dimensions can be adjusted on demand. Its speed reaches up to 250mm/s with an accuracy of 0.5mm and can move up to 5kg. Junior is also characterized by its ease of use: for instance you can teach the robot the movements to be carried out by manually moving the robotic arm. Finally, the robot stops in case of impact, enabling collaborative applications if all safety conditions are met. While prices often start around €20,000 on the market, Junior is available from €8000. Full Press Release:
Drake: Robotics Planning, Control And Analysis Toolbox
From MIT:
Drake ("dragon" in Middle English) is a toolbox maintained by the Robot Locomotion Group at the MIT Computer Science and Artificial Intelligence Lab (CSAIL). It is a collection of tools for analyzing the dynamics of our robots and building control systems for them in MATLAB and C++, with a heavy emphasis on optimization-based design/analysis. Here is a quick summary of capabilities:
Simulation
Rigid-body dynamics including contact/collisions (hybrid+LCP) and kinematic loops
Basic aerodynamics/fluid dynamics
Sensor models (lidar, depth camera, imu, contact force/torque; cameras coming soon)
Hand-derived models for many canonical control dynamical systems
Easily add your own models/components
Some support for stochastic models
For all of the above we aim to expose sparsity and provide analytical gradients / symbolic analysis
Primary limitations: code is optimized for analysis / planning / control design (as opposed to speed, generality)...
... Most of these models/tools are described in the companion textbook from an MIT course/MOOC . We've also recently started populating the Drake Gallery (contributions welcome!)... ( git repo )
Simbe Robotics launches new retail robot
By Silicon Valley Robotics via Robohub: The area of service robotics is getting active, with a new retail robot startup launching today. Tally is one of several robotics startups launching today at Haxlr8r’s 7th Demo Day. Tally is an inventory tracking robot platform fromSimbe Robotics and the “world’s first robotic autonomous shelf auditing and analytics solution” according to the press release.
Tally is in trials with several North American retailers and will traverse aisles scanning and auditing merchandise to help stores maintain ideal product placement, fill inventory gaps, and find misplaced or mispriced items. Tally is also capable of autonomously returning to base to charge.
“When it comes to the retail industry, shopper experience is everything. If a product is unavailable at the time the shopper wants to buy it, the retailer has missed an opportunity and disappointed their customer,” according to Brad Bogolea, CEO and Co-founder of Simbe Robotics. “Tally helps retailers address these challenges by providing more precise and timely analysis of the state of in-store merchandise and freeing up staff to focus on customer service.” Cont'd...
Toyota Invests $1 Billion in AI and Robots, Will Open R&D Lab in Silicon Valley
By Erico Guizzo and Evan Ackerman for IEEE Spectrum: Today in Tokyo, Toyota announced that it is investing US $1 billion over the next five years to establish a new R&D arm headquartered in Silicon Valley and focused on artificial intelligence and robotics. The Toyota Research Institute (TRI) plans to hire hundreds of engineers to staff a main facility in Palo Alto, Calif., near Stanford University, and a second facility located near MIT in Cambridge, Mass.
Former DARPA program manager Dr. Gill Pratt, an executive technical advisor at Toyota, was named CEO of TRI, which will begin operations in January. Toyota president Akio Toyoda said in a press conference that the company pursues innovation and new technologies “to make life better for our customers and society as a whole,” adding that he wanted to “work with Gill not just because he’s an amazing researcher and engineer, but because I believe his goals and motivations are the same as ours.” Cont'd...
Robot Can Pick and Sort Fruit
A robotics breakthrough by product design and development firm Cambridge Consultants is set to boost productivity across the food chain – from the field to the warehouse. It paves the way for robots to take on complex picking and sorting tasks involving irregular organic items – sorting fruit and vegetables, for example, or locating and removing specific weeds among crops in a field.
“Traditional robots struggle when it comes to adapting to deal with uncertainty,” said Chris Roberts, head of industrial robotics at Cambridge Consultants. “Our innovative blend of existing technologies and novel signal processing techniques has resulted in a radical new system design that is poised to disrupt the industry.”
Interactive Video Annotation Tool for Computer Vision Research
From University of California, Irvine:
VATIC is a free, online, interactive video annotation tool for computer vision research that crowdsources work to Amazon's Mechanical Turk. Our tool makes it easy to build massive, affordable video data sets and can be deployed on a cloud. After three years of research, vatic is now used by labs around the world to annotate the next generation of data sets.
Features
Crowdsource video annotation to Mechanical Turk
Automatic quality assurance for good annotations
Complex payment schedules and bonuses
One-click worker compensation
Optimized interface for video annotation
Offline mode for expert annotator use (no MTurk)
( site ) ( github )
Records 631 to 645 of 649
First | Previous | Next | Last
Automation & IIoT - Featured Product
PI USA - Steering light beams: Pros and cons of different methods
Optical system designers utilize tried-and-true technology like galvo scanners, voice coil-driven steering mirrors, kinematic mirror mounts, and gimbal mounts. This article describes strengths and limitations of these technologies and looks at other light steering methods.
