Patti Engineering Completes Infrastructure Automation Project for Siemens Water and Wastewater Project

Patti Engineering releases details on completed water and wastewater infrastructure automation project for the city of Fair Oaks Ranch, TX; engineering team made improvements to allow central control, remote equipment management, save energy, and reduce operating costs.

Inertia Dynamics Spring Applied Brakes for Servo & Stepper Motors

SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position.

Proposed FAA Commercial UAS Rules

From IEEE Spectrum: Unmanned aircraft must weigh less than 55 lbs. (25 kg). Visual line-of-sight (VLOS) only; the unmanned aircraft must remain within VLOS of the operator or visual observer. At all times the small unmanned aircraft must remain close enough to the operator for the operator to be capable of seeing the aircraft with vision unaided by any device other than corrective lenses. Small unmanned aircraft may not operate over any persons not directly involved in the operation. Daylight-only operations (official sunrise to official sunset, local time). Must yield right-of-way to other aircraft, manned or unmanned. May use visual observer (VO) but not required. First-person view camera cannot satisfy “see-and-avoid” requirement but can be used as long as requirement is satisfied in other ways. Maximum airspeed of 100 mph (87 knots). Maximum altitude of 500 feet above ground level... (full article)

KBM™ Series Frameless Servo Motors Deliver High Performance for Tightly Integrated Motion Applications

Introducing a new family of motors from Kollmorgen - the KBM™ Series Frameless Brushless Motors. Its inherent features and resulting performance attributes make the KBM a perfect fit for applications that demand a flexible, highly optimized motion solution.

Industrial Robot Sales Are Booming, and OCTOPUZ Joins The Trend

By the end of 2017, an estimated two million industrial robots will be operating in factories around the world.

USD 5 Million Prize International Robotics Challenge Announced

he Mohamed Bin Zayed International Robotics Challenge intends to attract the world's best and brightest in robotics

TurboFil to Introduce Innovative Bottle Capper and Pharmaceutical Track and Trace at PackExpo East

At PackExpo East, TurboFil Packaging Machines will showcase its new Multi-Head Hybrid Capper MH120, the most flexible chuck capper available for speeds up to 120 bpm. The second introduction, Reditrace Pharmaceutical Track and Trace, is a new cloud based system that makes all required data available from any location.

Changing Automation with Sensitive Robots

Critics of automation claim robots are out to replace people. The near future will show that people are definitely in control and will be able to leverage technology for greater profitability and professional satisfaction.

Communicating Cars the Future?

If uninterrupted conversations between cars make driving safer, then self-driving cars will become safer as well.

Drone Maker 3D Robotics Releases Open-Source, Customizable Tower(SM) Flight Control App

Free App for Smartphones and Tablets Has Everything Pilots Need to Plan, Fly and Track Any 3DR-Powered Drone; Open-Source Code Allows Programmers to Build or Alter Features

HEIDENHAIN's Slim Encoder Offers Flexibility to Motor Design

HEIDENHAIN is proud to announce the addition of its new slim-design ECI 1118 rotary encoder to its expansive product line. With a thickness of only 10mm and a diameter just less than 37mm, the new absolute ECI 1118 encoder offers motor manufactures more flexibility within their design, including the ability to fit into compact applications while still retaining the high quality feedback and speed control for which HEIDENHAIN is well known.

Minibuilders

From iaac: Minibuilders was conceptualized as a community of three modestly sized robots which were tasked with very specific jobs that aggregated to a large scale operation. Each robot completes its programmed job in sequence to fully construct an automated, inhabitable structure... (full article)

Intelligrated appoints new senior sales engineer for southern region

Material handling automation and robotics expert responsible for supporting existing accounts, developing new business in key growth region

Adoption of Advanced Robots to Boost Industrial Productivity, Lower Total Labor Costs

The use of advanced industrial robots is nearing the point of takeoff, a development that could power a new wave of productivity growth in many industries and lead to changes of up to 5 percentage points in the cost competitiveness of major export economies relative to the U.S., according to new research by The Boston Consulting Group (BCG).

Coldwater Machine Company Announces New SpotMeld System For Spot Welding of Non-Ferrous and Non-Metallic Flat Materials

Coldwater Machine Company has developed a new refill friction stir spot welding (RFSSW) system that can join aluminum, magnesium, non-ferrous and dissimilar sheet materials.

Records 4666 to 4680 of 4777

First | Previous | Next | Last

Additive & 3D Printing - Featured Product

Prototek IQ -  Digital Manufacturing Services

Prototek IQ - Digital Manufacturing Services

Prototek IQ is our new instant quoting platform that simplifies your manufacturing process. With just a few clicks, you can get accurate quotes for 3D printing and CNC machining, which are currently two different platforms. Our easy-to-use interface helps you make smart choices. Use Prototek IQ to improve efficiency and streamline speed to market. We invite customers with experience in large projects, 3D printing, and CNC machining, as well as those with repeat orders, to try our instant quoting platform. You can choose our engineer-assisted quote option if you have unique needs, such as high quantities, specific quality standards, fast delivery, or special finishes.