Readers Choice 2020: Quality 4.0: The 3 Most Important Technologies for Manufacturers
This article will explain the three technologies, that, based on Boston Consulting Group's Quality 4.0 study - will be deployed by most manufacturers who are planning to improve their quality management.
Cooling with the Cold Gun Aircoolant System and Vortex Tubes
Vortex Tubes are a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. EXAIR has used this vortex tube in the Cold Gun Aircoolant System™ to produce a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. EXAIR's Cold Gun is non-adjustable to prevent freeze-up during use.
Business is Booming for Oilfield and Refinery Overhauls of Natural Gas Compressors
Although there are varying types of compressors, common reciprocating compressors utilize an electric motor to turn a crankshaft that causes a piston to rise and fall within the cylinder to compress the air or gas. To maximize compression, there must be a tight seal between the piston rings and cylinder bores.
GROB Systems Highlights Second Generation of G350 5-Axis Universal Machining Center
Universal machining centers offer high productivity and nearly limitless possibilities
Stahlin Enclosures Continues To Build On Nearly 60-Years Proven Service To Panel Shops
For nearly six decades Stahlin® has brought the many benefits of non-metallic enclosures to panel shops.
AttaBox® Enclosures Introduces A New 316 Stainless Steel Corrosion-Resistant Latch Available Standard For All Heartland® Polycarbonate Enclosures
The new strong, secure-fitting stainless steel latch maintains a 4X Rating.
Inspekto provides quick solution for new QA need
The leader of Autonomous Machine Vision is using its signature product to inspect FFP2 face masks
Fastems to Deliver a Laser Cleaner Robot for F-35 Lightning II Wing Assembly Line
The Fastems AutoSLC system will process more than 3,000 drilled holes, reducing touch labor hours and improving aircraft quality for the end customer.
Leading manufacturing business invests in Timico's cloud telephony solutions
IT managed service provider, Timico has been successfully appointed by Roxel UK, to implement MiCloud Flex solutions and drive successful digital transformation across the organisation.
Bally Ribbon Mills Provides Fully Berry-Compliant Polyester Webbing for Seat Belts, Retractors and Tie-Down Applications
Bally Ribbon Mills, an industry leader in the design, development, and manufacture of highly specialized engineered woven fabrics, announces it has expanded capabilities for producing superior polyester webbing that is fully compliant with the Berry Amendment. This standard requires the Department of Defense to give preference to domestically produced fabrics and clothing. Webbing is available in low minimum runs - as low as 1000 yards per color.
Warren Controls Announces New Updates to ValveWorks Program to Improves Sizing and Selection Process
The release announces new updates to its state-of-the-art ValveWorks® program to improve the sizing and selection process for globe and rotary control valves based on the ISA 75.01 international standard.
KROHNE Announces New OPTISONIC 6300 V2 Ultrasonic Flowmeter Design
The new OPTISONIC 6300 V2 ultrasonic flowmeter with a stationary, clamp-on design ideal for a wide range of systems. The OPTISONIC 6300 V is a flexible solution, with a quick and easy installation requiring no process shutdown and no flow interruptions or downtime. It offers greater safety for operators and plants themselves, thanks to a reduction in potential leakage points and its suitability for toxic corrosive fluids.
REMOTE MONITORING OF INSPECTION, EVEN ON THE MOVE
Consistent with the aims of Industry 4.0, the new Metrology Gate portal provides remote access to information on the status and performance of all connected metrology devices.
Which Technologies Are Revolutionizing Auto Manufacturing?
The auto industry is undergoing a major transformation. A wave of new technologies from outside the industry - especially Industry 4.0 technology - is starting to influence industry workflows significantly.
Meler laminating rollers
The result of specialisation in the use of hot melt adhesives in the automotive industry
Records 2641 to 2655 of 5885
First | Previous | Next | Last
Supply Chain - Featured Product
ResinDek® TRIGARD® ESD ULTRA FOR HIGH-TRAFFIC ROBOTIC APPLICATIONS
To maximize the productivity of an autonomous mobile robot (AMR) or automatic guided vehicle (AGV) deployment, it's critical to create the optimal environment that allows the vehicles to perform at their peak. For that reason, Cornerstone Specialty Wood Products, LLC® (www.resindek.com) created the TriGard® ESD Ultra finish for its ResinDek® engineered flooring panels. The TriGard ESD Ultra finish is ideal for high-traffic robotic applications characterized by highly repetitive movement patterns and defined travel paths.
