SME's THE BIG M Shapes the Future of Manufacturing through Student Summit
Students experience manufacturing firsthand through gas-to-electric vehicle conversion and creation of underwater remote-operated vehicles.
CyPhy Works, Inc. Revolutionizes Multi-Rotor Drone Flight with Launch of LVL 1 Drone
Helen Greiner, CEO of CyPhy Works and cofounder of iRobot, announces first consumer drone
PKD International's RX1 Roll Fed Labeler Registration System
PKD International is a leading manufacturer of roll-fed labelers, and distributor of related parts & services. PKD has extensive engineering services providing quality manufacturing & assembly, spare parts & service, and sales & marketing expertise.
ST Robotics Announces New Vision System
ST Robotics offers an excellent, low-priced, yet highly accurate vision system that can measure to 0.1mm and send precise coordinates of an object to the robot.
Building Enthusiasm for Construction Robotics
Vicki Speed for Inside Unmanned Systems: It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal. The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense.
Demolition Days
Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade.
Robotic Building Blocks
The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors.
Bionic Builders?
While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.
Service Robotics Market - Global Industry Analysis, Growth And Forecast, 2013 - 2019
This market research report covers all the market aspects along with in-depth information about the drivers, restraints, and future market opportunities. The report also provides an insight into the various parameters of the service robotics market such as value chain analysis, market share analysis, new product developments, joint ventures and partnerships, collaboration, and recent market activities by the key players in the market.
Microsoft HoloLens gets real with robotics, surgery, architecture
Jared Newman for PCWorld: At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.
The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.
For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.
Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.
Bishop-Wisecarver Group Provides $2000 in Scholarships and Support to Local Eagle Scouts
Scholarships Given in Honor of Bishop-Wisecarver Founder, Bud Wisecarver,
and his Naturalist Brother, Bob Cooke Wisecarver
ISA and Automation Federation take part in annual FIRST Championship, an international celebration of young people's interest in science and technology
This years championship event drew more than 900 student teams from 40 countries around the world.
Pennsylvania Precision Cast Parts (PPCP) Has Installed Two New Robotic Dipping Systems to Enhance the Efficiency and Quality of its Investment Casting
Pennsylvania Precision Cast Parts (PPCP) has completed the installation of two additional robotic dipping systems used in making investment casting ceramic shells with enhanced consistency and quality.
Latest Access Point Spans Wi-Fi Mesh Network across Factory Floors and through Obstacles
NEXCOM's latest industrial Access Point, IWF 300, can easily spread Wi-Fi networks out to entire factories, warehouses, and industrial facilities demanding Internet connection.
AirMap Launches to Enable Safe, Legal and Hassle-Free Drone Flying
Introducing a Free, Comprehensive Airspace Database and Resource for Unmanned Aircraft Operators
OSU Engineers Test Locomotion Abilities of Two-Legged Robot
In a rolling, outdoor field, full of lumps, bumps and uneven terrain, researchers at Oregon State University last week successfully field-tested for the first time the locomotion abilities of a two-legged robot with technology that they believe heralds the running robots of the future.
Innovative 3D Scanner Relies On Manta Camera From Allied Vision
8tree's portable 3D scanner enables easy, fast surface inspection in the automotive and aerospace industries. A Manta digital camera from Allied Vision contributes to rapid and accurate measurement.
Boomerang Systems to Install 577-Space RoboticValet System at HERE Lawrence, Kansas Student Housing Project
The project is presently under construction and is scheduled for completion in 2016.
Records 2296 to 2310 of 2647
First | Previous | Next | Last
Additive & 3D Printing - Featured Product
The Endurance flagship 10 watt (10000 mW) diode laser module.
The Endurance 10 Watt laser - "Invincible" continuous power. Engraves on stainless steel, copper and brass. Cuts 4-5 mm (1/6'') wood and plywood with just one pass. Cuts 8 mm (1/3'') dark acrylic with 2-3 passes. Compatible with almost all 3D printers and CNC machines. We deliver everything you need to get started. The "Invincible" laser enables to create incredible things with your 3D printer / CNC machine. Unlike many Chinese lasers the Endurance 10 watt laser can work continuously up to 48-72 hours. Its lifetime is about 10 000 hours. Its real rated optical power output of is 10 watt (10000 mW). Endurance provides an ultimate customer support with full guidance and tutorials. Learn more about the laser: https://www.youtube.com/watch?v=kM-utYFYvFk
