Desktop Metal Awarded Seminal Separable Supports Patents for Its Metal 3D Printing Technology
Separable Supports, an Industry First, Enable Printing of Large Parts through Metal Sintering and the Removal of Metal Support Structures by Hand
Static Promo - FREE AC Sensor with Static Eliminator Purchase
Learn how EXAIR can eliminate your static problems. EXAIR's static eliminators (called ionizers) can eliminate the static charge. These shockless ionizers are electrically powered and produce a bulk of positive and negative ions. The charged surface attracts the appropriate number of positive or negative ions from the ionizer to become neutral (discharge).
Antaira Armor: New Impeccable Protection in Corrosive Environments
Antaira Technologies is proud to announce the expansion of its industrial networking infrastructure family with the introduction of the Antaira Armor Series.
High Quality Heat Pipe and Heat Pipe Exchanger Manufacturers -Maniks
A heat pipe heat exchanger is a simple device which is used to transfer heat from one location to another, using an evaporation-condensation cycle. Heat pipes are referred to as "superconductors" of heat due to their fast transfer capability with low heat loss.
Threaded Line Vac Turns Pipe Into a Conveyor
EXAIR's aluminum 3/8 NPT and 1/2 NPT Threaded Line Vac™ Air Operated Conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. Their small size makes them perfect for fitting in the cramped spaces and tight confines of many production lines.
Industrial ERP software facilitates growth
Microsoft Dynamics 365 partner Ardent Solutions is working with manufacturing company Loma Systems to implement a new ERP system. Having used the same ERP software for nearly 20 years, Loma has grown significantly, making its current systems incompatible with its business objectives.
High Quality and Cost effective regulating Valve Manufactured by Maniks
Regulating Valve:
MREG-A and MREG-B are angle-way and straightway hand regulating valves, which act as normal stop valves in closed position.
The valves are available in two different versions - MREG-A and MREG-B designed for regulation purposes in liquid and expansion lines.
The valves are available in two different versions - MREG-A and MREG-B designed for regulation purposes in liquid and expansion lines.
The valves are designed to meet the strict quality requirements on refrigerating installations specified by the international classification societies and are carefully designed to present favourable flow conditions and accurate linear characteristics.
MREG-A and MREG-B are equipped with vented cap and internal back-seating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure.
TE Connectivity offers first pluggable one-cable solution for power, signal and data for small servo motors-the Intercontec M12 Motor Connector
Their Intercontec M12 Motor Connector is a compact, robust metal connector for installations based on one-cable solutions and covers the digital transmission of 2- and 4- wire encoder protocols like Hiperface DSL, BiSS, EnDat 2.2, ACURO link and SCS open link.
AIA's The Vision Show, North America's Largest Display of Vision and Imaging Solutions, Opens for Registration
Organization Provides Attendees with Practical Knowledge for Immediate Implementation, Adds New Focus on Embedded Vision
Large Atomizing Spray Nozzle Covers 360 Degrees
EXAIR's 1/2 NPT internal mix 360 degree hollow circular pattern atomizing spray nozzle atomizes fluid and sprays away from the nozzle in all directions, up to 13 feet in diameter. These nozzles are ideal where a liquid application is needed in a broad area, such as dust suppression, humidification and cooling. They can also be used to coat the inside of large diameter pipe or duct. By combining liquid and compressed air inside of the air cap these nozzles produce the finest mist of atomized liquid that can be easily adjusted to meet the needs of your application. These spray nozzles provide liquid flows from 10.8 to 150 gallons per hour.
TE Connectivity helps stepper motor manufacturers improve energy efficiency and motion control with highly engineered terminals and splices
TEs terminals and splices for stepper motors can be used in applications like robotics, machine tools and pick-and-place machines.
Sulzer Announces MIXPAC™ MixCoat™ Spray Protective Coating Dispensing System
Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, announces the availability of MIXPAC™ MixCoat™ Spray, a member of the innovative MIXPAC™ MixCoat™ cartridge-based 2-component dispensing system family
New Balance uses ultrasonic screening technology to sieve 3D printing powders
Russell Compact Sieve® paired with innovative ultrasonic technology increases throughput and prototype iteration at New Balance
Machine Vision: MVTec brings deep learning to NVIDIA Pascal architecture
• Deep learning inference in HALCON 17.12 successfully tested on NVIDIA Jetson TX2 embedded board
• High execution speed, comparable to standard PCs
• Extensive range of functions available on embedded devices
New SST 4200 Tool Presetter Enhances Efficiency and Quality of Precision Part Manufacturing
Uninterrupted part processing improves with greater measurement accuracy, tool traceability and tool cost efficiency
Records 3361 to 3375 of 4648
First | Previous | Next | Last
Supply Chain - Featured Product
Parvalux by maxon - AC or DC electric motors for conveyor systems?
The material handling industry uses conveyors to ensure that products are distributed effectively, AC or DC motors are chosen depending on the weight it needs to carry and the speed at which it needs to work. Learn which type of conveyor motor might be best for your application and how Parvalux can help you select a geared motor from stock or create a fully custom design.
