UltraFlex performing fast induction brazing for copper and steel fittings at 1500°F (815°C)
At power output of 7.5 kW, the target brazing temperature of 1500°F (815°C) had been reached, for each of the assemblies, within a fraction of the time needed when torch brazing is used.
NORD's New Line of Small CLINCHER™ Parallel Shaft Gear Units Provide More Power, Flexibility, and Reliability
NORD's redesigned line of small CLINCHER parallel gear units showcase increased power and torque capacity for a variety of applications. These re-engineered versions will be replacing the existing SK0182NB, 0282NB, and 1382NB units. They are lightweight, have improved heat dissipation, are more cost-effective, and are available with NORD nsd tupHTM sealed surface conversion for wash-down and extreme environments.
Industry Leading Piezo Objective Scanners for fast AutoFocus and Metrology Applications with Nanometer Precision
The next gen piezo focusing stages, new from PI, have longer travel ranges to 800µm, faster step/settle, better guiding precision, and higher resolution.
Applied Manufacturing Technologies Successfully Installs State-of-the-Art Automated Production and Material Handling Solutions at Meat Processor Wolverine Packing Co.
AMT shares details of newly-completed installation of flexible automated production and material handling lines at two Detroit-area Wolverine Packing Co. facilities, allowing the company to quickly scale production.
GROB Systems Highlights Second Generation of G350 5-Axis Universal Machining Center
Universal machining centers offer high productivity and nearly limitless possibilities
ON Semiconductor 16 Mp XGS Sensor Brings High Quality, Low Power Imaging to Factory Automation and Intelligent Transportation Systems (ITS)
Recently integrated into the Toshiba Teli industrial camera family, the XGS 16000 offers one of the highest resolutions available for compact 29 x 29 mm cameras
Digi-Key Introduces Factory Tomorrow Video Series
Flagship video series showcases how edge computing helps factories deploy and run field-based machines without the need for central networking
Brooks Instrument Opens New Manufacturing, Service and Applications Support Center in Korea
New location expands Brooks Instrument's production, service and applications engineering capabilities, providing enhanced support to key customers in the region.
KROHNE Announces New OPTIWAVE 6500C Level Transmitter
A radar level transmitter ideal for powders and dusty atmospheres
Artemis Vision Creates Advanced Machine Vision Solutions Using OnLogic Computers
The company's quality control and warehousing logistics solutions leverage OnLogic industrial computers to improve products, processes and fulfillment.
New Atlas "Factory Tough" 5GBASE-T Camera Series with IP67 Protection for Industrial Applications
These Atlas models have a 5 GigE PoE interface and feature a range of popular Sony Pregius global and rolling shutter CMOS image sensors. The first models available include the 7.1 MP Sony IMX420 sensor with a resolution of 3208 x 2200 px running at 74.6 fps, and the 20.0 MP IMX183 sensor with a resolution of 5472 x 3648 px running at 17.8 fps.
Global auditing programmes and data management measures enhanced with EASE Summer 2021 Release
Manufacturers operating multiple plants whether within a single geography or internationally can now gain more insight into the effectiveness of their auditing programmes throughout their portfolio with the introduction of the EASE Summer 2021 Release.
Introduction And Advantages Of Thread Milling Cutter
Thread milling cutters have many advantages, which are more advantageous than wire taps. Thread milling cutters are more than ten times faster than wire taps and have high precision.
The surface roughness is good, and the same pitch can be used to process the large and small holes with a knife. Drilling, milling and chamfering are formed at one time. After being broken, it will not be taken out like a wire tap, and the machine tool resistance is also small.
Prototype Development and Testing for Woven Webbings
The art and science of developing end materials for challenging new applications
Scaling Single-Use Liquid Dispensing from R&D to Automated Production
Easy production scale up and changeovers are possible with accurate, reliable liquid
measurement and filling systems in complete kits that eliminate the need to clean and
sterilize equipment between batches
Records 2191 to 2205 of 6207
First | Previous | Next | Last
Automation & IIoT - Featured Product
OnLogic Tacton TC401 Rugged Panel PC
The Tacton TC401 panel PC is an easy to install touchscreen computer purpose-built for reliability in tough environments. Choose the display size, type, and brightness, and match it with the compute, I/O, and functionality your unique project requires.
