OH!Manufacturing's 3D Printing & AM Forum was a Success!
Approximately 100 people attended the OH!Manufacturing 3D Printing & Additive Manufacturing Forum held at The Ohio History Connection, Columbus, Ohio.
Global Motion Control Shipments Contract 3.9% in 2015
Global shipments for motion control products declined by 3.9% to $2.9 billion in 2015, according to new statistics released by the Motion Control & Motor Association (MCMA), the industrys trade group.
Fonon Corporation Announces Expansion into South American Market
Increased capital investment in industrial laser equipment expands footprint of Fonon brand Laser Photonics
Innovation in Creation: Demand Rises While Prices Drop for 3D Printing Machines
Declining 3D printer prices will prompt innovations at a faster rate in downstream markets, making customization the new norm for a wide variety of products.
Shootout: Fiber Laser Vs Vertical Milling In 3D Deep Engraving
Fonons Canyon 3D Deep-Engraving System cost is less expensive, deep-engraves at almost 2X the processing speed, requires no consumables and is 100% maintenance-free. There is no workplace or environmental hazards with a superior quality of workmanship when compared to vertical milling machines.
Learn about the Future of Portable Power at #MouserParty
Join Mouser Electronics and UCLAs Dr. Richard Kaner on Twitter on February 17 to Learn How Graphene Could Power Our World
Riddle of Cement's Structure is Finally Solved
From MIT News:
Concrete is the world’s most widely used construction material, so abundant that its production is one of the leading sources of greenhouse gas emissions. Yet answers to some fundamental questions about the microscopic structure and behavior of this ubiquitous material have remained elusive.
Concrete forms through the solidification of a mixture of water, gravel, sand, and cement powder. Is the resulting glue material (known as cement hydrate, CSH) a continuous solid, like metal or stone, or is it an aggregate of small particles...
... Roland Pellenq, a senior research scientist in MIT’s department of civil and environmental engineering, director of the MIT-CNRS lab 2 hosted by the MIT Energy Initiative, and a co-author of the new paper, says the work builds on previous research he conducted with others at the Concrete Sustainability Hub (CSHub) through a collaboration between MIT and the CNRS. “We did the first atomic-scale model” of the structure of concrete, he says, but questions still remained about the larger, mesoscale structure, on scales of a few hundred nanometers. The new work addresses some of those remaining uncertainties, he says. ( full article )
Who Is Adopting IoT and Why?
We all know the Internet of Things is set to revolutionize the manufacturing industry but how will this happen? A new study of manufacturers across 12 different countries has provided quantified answers to the questions the industry is asking.
Microscan Demonstrates LVS Offline Verification and Print Quality Inspection at INFO*FLEX 2016
Microscan will demonstrate LVS® label verification and print quality inspection solutions from Booth #110 at the 2016 INFO*FLEX Expo, March 7-8 at the Fort Worth Convention Center in Fort Worth, Texas, U.S.A.
MD&M West - Quality Expert Walt Murray Selected to Participate in IDEO Panel Discussion at MD&M West
MasterControl (MD&M West booth #2844), a leading global provider of enterprise quality management systems (EQMS) and quality consulting services, today announced that Walt Murray, Director of Quality & Compliance Consulting Services for MasterControl, has been selected to participate in a panel discussion at MD&M West, Thursday, February 11, 2016.
Meet Advanced Motion Control's Family of Servo Amplifiers
AMC offers hundreds of standard servo drive and amplifier models, accept various command signals, communicate over several networks and operate in many different modes. For instance, the digital product line supports several different interface options including: analog input, step and direction, encoder following, RS-232/485, CANopen or SynqNet™. These same interfaces can be found on servo drives with power output capabilities ranging from 20W up to 40KW of peak output!
Rockwell Automation to Acquire MagneMotion, a Leading Manufacturer of Intelligent Conveying Systems
Advanced Motion Technology Will Complement iTRAK Motion Solution
Milacron's 3 Year Manufacturing Footprint Optimization Plan Takes Another Step Forward
Milacron Holdings Corp. (NYSE: MCRN), a leading industrial technology company serving the plastics processing industry is pleased to announce that their newest European manufacturing facility in Polička, Czech Republic, is progressing as planned.
Orders Grew in December, but Market Remains Flat
The U.S. Manufacturing Technology Orders report (USMTO) for December 2015 showed that order values grew 20.4% compared to the prior month, according to AMT - The Association For Manufacturing Technology. For all of 2015, the years total orders were down 17.4% compared to 2014.
SLT and LASYS: Productive combination for experts and users
A strong team: Conference and trade fair again under one roof / Scientific and practical highlights from industrial laser technology
Records 2011 to 2025 of 2335
First | Previous | Next | Last
Featured Product
ResinDek® TRIGARD® ESD ULTRA FOR HIGH-TRAFFIC ROBOTIC APPLICATIONS
To maximize the productivity of an autonomous mobile robot (AMR) or automatic guided vehicle (AGV) deployment, it's critical to create the optimal environment that allows the vehicles to perform at their peak. For that reason, Cornerstone Specialty Wood Products, LLC® (www.resindek.com) created the TriGard® ESD Ultra finish for its ResinDek® engineered flooring panels. The TriGard ESD Ultra finish is ideal for high-traffic robotic applications characterized by highly repetitive movement patterns and defined travel paths.
