Novotechnik U.S. introduces the Vert-X 31E Series
The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to an application's rotating shaft, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear.
Dorner Launches Next Generation 2200 Series Precision Move Conveyors
When applications call for precise movement of product, then Dorner's newly redesigned 2200 Series Precision Move Conveyor is the answer.
ST Robotics Offers New Super-Fast Robot Arm
ST Robotics recently released a high-speed version of its five-axis vertically articulated R17 robot arm at the low price of $18,600.
Advanced Design & Manufacturing (ADM) Cleveland Continues UBM's Long Running Strategic Partnership Alliance with the Institute of Packaging Professionals (IoPP)
UBM's inaugural ADM Cleveland event, takes place on March 29-30 at the Huntington Convention Center and offers two days of free industry education, packaging focused content, a dynamic expo floor, and a three track conference series spotlighting automotive, medtech, and smart manufacturing. Included on the expo floor are the latest technology and materials specifically geared towards professionals and decision makers in the packaging sector.
Oerlikon announces groundbreaking for advanced materials manufacturing facility in Michigan, USA
Oerlikon expects the demand for advanced materials to increase in the coming years. The facility will produce materials such as titanium alloys, which are in high demand for the additive manufacturing market, and diverse high-end thermal spray powders.
Microscan Launches MicroHAWK® UHD Imagers to Decode Small and Difficult-to-Read Printed and DPM Symbols
New MicroHAWK UHD barcode readers and smart cameras can decode symbols with an x-dimension almost invisible to the naked eye.
Engineers and Students From Across the World Compete to Build a Brighter Future
Engineering Innovation Award: $20,000 Grand Prize
Xilinx Demonstrates Responsive and Reconfigurable Vision Guided Intelligent Systems at Embedded World 2017
Xilinx's tools, libraries and methodologies infuse machine learning, computer vision, sensor fusion, and connectivity into vision guided intelligent systems
Optomec Partners with Tongtai to Deliver Hybrid Additive Manufacturing Machines in Taiwan
The Optomec LENS family of 3D metal printers has been used in industry for over two decades to cost-effectively repair, rework and manufacture high-performance metal components in materials such as titanium, stainless steel, carbides and nickel based super alloys.
Milacron Expands FANUC ROBOSHOT Offering in the Americas with the New ROBOSHOT SI-20A Secondary Injection Unit
The new FANUC ROBOSHOT SI-20A secondary injection unit was designed and developed by FANUC in Japan. The SI-20A continues to offer the same high quality, high technology and precision synonymous with the ROBOSHOT name.
Machine vision gets even more user-friendly: MVTec presents MERLIC 3
Increased performance and robustness
Deep learning optimizes OCR
Improved reading of bar and data codes
Automate 2017 - KINGSTAR to Show How EtherCAT-enabled Soft PLC Cuts Hardware Costs in Half at Automate 2017
KINGSTAR, the industry's leading provider of EtherCAT-enabled software PLCs and the most complete motion control platform on the market, will showcase its innovative machine automation solutions at booth 349 at Automate 2017, April 3-6, in Chicago, Illinois.
America Makes and ANSI Publish Standardization Roadmap for Additive Manufacturing
The roadmap provides a snapshot of the current additive manufacturing standards landscape and identifies 89 "gaps" - 19 of them high priority - where no published standard or specification currently exists to address a particular industry need. In 58 of those cases, additional research and development (R&D) needs are identified.
BeeHex Raises $1 Million For Fresh Food Robots
3D food printing startup adds Jim Grote, Grote Company founder as partner
Ambionics Achieves Breakthrough Development of Unique Child Prosthetic With Stratasys 3D Printing
-Self-taught father develops customized 3D printed hydraulic prosthetic for two-year old amputee son, avoiding wait for state-developed version
-Design and production of 3D printed hydraulic prosthetic enables cost savings of up to 76%, as well as time savings in design and production of 90% compared to traditional methods
Records 1621 to 1635 of 3837
First | Previous | Next | Last
Featured Product
KINGSTAR Soft PLC - Replace Your PLC with an EtherCAT-enabled Soft PLC for Real-Time Motion Control and Machine Vision
The top machine builders are switching from proprietary hardware-based PLCs, like Allen-Bradley, TwinCAT, Mitsubishi and KEYENCE, to open standards-based EtherCAT-enabled software PLCs on IPCs. KINGSTAR provides a fully-featured and integrated software PLC based on an open and accessible RTOS. KINGSTAR Soft PLC also includes add-on or third-party components for motion control and machine vision that are managed by a rich user interface for C++ programmers and non-developers alike.
