Russelectric, A Siemens Business, Introduces ATS Remote Annunciator
Powerful accessory brings together data from multiple automatic transfer switches into a single display
.
The remote annunciator is designed to be configured by the customer. It allows monitoring of the position and status of up to eight Russelectric ATS types RTSCD and RPTCS, as well as viewing power data for each ATS and accessing current alarms and logged historical alarms. Users can initiate load tests and set timers remotely using the RS-422/485 Protocol to ATS. In addition, there is the ability to configure email alerts for alarms. An Ethernet connection is available for
r exchanging data via the OPC UA protocol to another SCADA or building management system.
ATSs manufactured by Russelectric are modern, high-speed switching devices designed to transfer electrical loads from a preferred power source to an alternate power source when voltage and/or frequency vary beyond preset limits. They also retransfer loads when the preferred source is restored.
###
About Russelectric
Founded in 1955, Russelectric®, A Siemens Business, provides high-integrity power control solutions for mission critical applications in the healthcare, information technology, telecommunication, water treatment, and renewable energy markets. The company maintains vertically-integrated manufacturing facilities in Massachusetts and Oklahoma, where it designs and builds a full line of automatic transfer switches, switchgear, and controls. Russelectric products carry the longest and most comprehensive warranty in the industry and are backed by a team of expert factory-direct field service engineers. To learn more about Russelectric products and the company's commitment to customer satisfaction, visit www.russelectric.com, call (781) 749-6000, or email info@russelectric.com.
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
