Simulating Clearpath Robots In Maplesim
If your robotics research depends on accurate models, you may want to consider looking at MapleSim® 2015 - a high performance physical modeling and simulation tool developed by Maplesoft™.
ABB's Acquisition of Gomtec Expands Collaborative Robotics Portfolio
ABB, a leading power and automation group, announced it acquired Gomtec GmbH to expand its offering in the field of collaborative robots. The parties agreed not to disclose financial terms of the transaction.
Gomtec, based near Munich, Germany, is a privately held company that develops mechatronic systems combining mechanical, electrical, telecommunications, control and computer engineering for customers in diverse industries. It has 25 employees.
Gomtec's technology platform will strengthen ABB's development of a new generation of "safe-by-design" collaborative robots that can be operated outside of cages or protective fencing, expanding opportunities to deploy them in new applications.
25 teams prepare for 2015 DARPA Robotics Challenge Finals
By David Szondy for Gizmag: On June 5 and 6, the 2015 DARPA Robotic Challenge (DRC) Finals will take place at Fairplex in Pomona, California. Open to the public, it will see 25 international teams compete for US$3.5 million in prizes as part of an effort to develop robots for disaster relief. Here's what to expect.
This year's challenge will see 25 teams competing. Half of the teams are from the United States, five are from Japan, three from Korea, two from Germany, one from Italy, one from Hong Kong, and one from the People’s Republic of China. They will be vying for a US$3.5 million total of prizes; including a $2 million first prize, a $1 million second prize, and a $500,000 third prize. The robots will be of a wide variety with some humanoid, some four-legged, and some tracked, but all will need to operate free of external power, mechanical support, and limited communications with their controllers.
The basic idea behind DRC 2015 is to make things much harder for the robots than previously.
Stephen Hawking fears robots could take over in 100 years
By Sharon Gaudin for ComputerWorld: Worried that one day we'll have robot overlords? You're in good company.
Reknowned physicist, cosmologist and author of A Brief History of Time, Stephen Hawking said this week that robots, powered by artificial intelligence (A.I.), could overtake humans in the next 100 years.
Speaking at the Zeitgeist conference in London, Hawking said: "Computers will overtake humans with AI at some within the next 100 years. When that happens, we need to make sure the computers have goals aligned with ours," according to a report in Geek.
This isn't the first time Hawking has spoken about the threat that comes along with machine learning, A.I. and robotics.
In December, Hawking said, "the development of full artificial intelligence could spell the end of the human race."
Video - Axium's Robotic Rotary Welder for Zeta Tank
This cell is divided into 4 stations: A manual loading/unloading station and three process stations where tank openings are cut and numerous components welded on.
Announcing the 2015 Soft Robotics Competitions!
The 2015 Prize for Contributions in Soft Robotics rewards academic researchers for sharing their work and advancing the field. The competitions include $10,000 in prizes!
'First heavy-duty collaborative robot' can lift 35kg
Fanuc claims that it is the first robot manufacturer to produce a heavy-duty robot designed to work safely alongside humans. Its CR-35iA robot can perform tasks involving payloads of up to 35kg without needing the protective guards and fences that have previously been needed for robots with similar lifting capacities.
Although there are already several other collaborative robots on the market, most are designed for much lower payloads.
The new robot will stop automatically if it touches a human operator. A soft covering material also reduces the force of any impacts and prevents human operators from being pinched by the mechanism. And if the robot comes too close to an operator, they can simply push it away. The covering has a green colour to distinguish it from Fanuc’s usual yellow robots.
The six-axis robot is designed for duties such as transferring heavy workpieces or assembling parts. By avoiding the need for safety barriers, it is claimed to improve production efficiencies and allow higher levels of automation.
The Membrane Potentiometer
A Competitive Alternative to Traditional Linear and Rotary Position Sensors.
18,000+ Students Bring Their Custom-Built Robots to the Largest Sport for the Mind™ Showdown, the 2015 FIRST® Championship
Building Enthusiasm for Construction Robotics
Vicki Speed for Inside Unmanned Systems: It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal. The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense.
Demolition Days
Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade.
Robotic Building Blocks
The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors.
Bionic Builders?
While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.
Microsoft HoloLens gets real with robotics, surgery, architecture
Jared Newman for PCWorld: At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.
The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.
For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.
Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.
Innovative 3D Scanner Relies On Manta Camera From Allied Vision
8tree's portable 3D scanner enables easy, fast surface inspection in the automotive and aerospace industries. A Manta digital camera from Allied Vision contributes to rapid and accurate measurement.
Video - Milling a Statue out of Soft Foam
This is an example of high speed milling of a soft foam statue into a sculpture using Robotmaster and a KUKA Robot. The 7-axis robot allows accurate cutting from all angles.
Fetch Robotics' Fetch & Freight
From Fetch Robotics (the core team from Unbounded Robotics/all former employees of Willow Garage):
The Fetch Robotics’ system is comprised of a mobile base (called Freight) and an advanced mobile manipulator (called Fetch). Fetch and Freight can also use a charging dock for autonomous continuous operations; allowing the robots to charge when needed and then continue on with their tasks. In addition, the system includes accompanying software to support the robots and integrate with the warehouse environment. Both robots are built upon the open source robot operating system, ROS.
Fetch is an advanced mobile manipulator, including features such as:
Telescoping spine with variable height from 1.09 to 1.491 meters
Capacity to lift approximately 6 kgs.
3D RGB Depth Sensor
Back-Drivable 7DOF Arm
Modular Gripper Interface
Head Expansion Mount Points
Pan-Tilt Head
Differential Drive
ROS-Enabled
Freight is a modular base, used separately or in conjunction with Fetch. Features include:
Base Expansion Mount Points
Payload support of approximately 68 kgs.
2D Laser Scanner
Stereo Speaker
Computer Access Panel
Run-Stop
ROS-Enabled
( full press release )
Planting Trees With Drones
From The Independent:
A drone start-up is going to counter industrial scale deforestation using industrial scale reforestation.
BioCarbon Engineering wants to use drones for good, using the technology to seed up to one billion trees a year, all without having to set foot on the ground... ( cont'd ) ( projects website )
Records 676 to 690 of 755
First | Previous | Next | Last
Additive & 3D Printing - Featured Product
BigRep ONE: Large-Scale 3D Printing
The BigRep ONE is an award-winning, large-format 3D printer at an accessible price point. With over 350 systems installed worldwide, it's a trusted solution for prototyping and production by designers, innovators, and manufacturers alike. Featuring a massive one-cubic-meter build volume, the fast and reliable ONE brings your designs to life in full scale.
