New ATEX Cabinet Cooler Systems for Explosive Environments

Visit https://exair.co/184-atexss for further information

EXAIR's new 316 Stainless Steel ATEX Cabinet Cooler® Systems are the latest solution for protecting sensitive electronics in ATEX classified areas. This low cost and reliable product is UL tested, CE compliant, and meets the stringent requirements for use upon classified purged and pressurized electrical enclosures within Zones 2 and 22. With cooling capacities up to 5,600 Btu/Hr., it's an ideal answer for protecting electrical enclosures with problematic overheating in areas with explosive atmospheres, both indoors and outdoors.

04/29/24, 05:50 AM | Supply Chain, Engineering | EXAIR

EXAIR's new 316 Stainless Steel ATEX Cabinet Cooler® Systems are the latest solution for protecting sensitive electronics in ATEX classified areas. This low cost and reliable product is UL tested, CE compliant, and meets the stringent requirements for use upon classified purged and pressurized electrical enclosures within Zones 2 and 22. With cooling capacities up to 5,600 Btu/Hr., it's an ideal answer for protecting electrical enclosures with problematic overheating in areas with explosive atmospheres, both indoors and outdoors.

EXAIR ATEX Cabinet Coolers produce and circulate cold air inside enclosures to prevent overheating, high temperature faults and costly shutdowns. They easily mount via a standard electrical knockout while maintaining the NEMA 4/4X integrity of enclosures in explosible areas. These systems include an auto-drain filter separator to ensure no water, dirt, or contaminants from the compressed air system pass into the electrical enclosure. Thermostat controls are available to minimize compressed air use, and cold air distribution kits ensure balanced cold air flow to all areas of the enclosure.
In addition to ATEX, EXAIR carries an extensive line of Cabinet Coolers ranging from NEMA 12, 4, 4X and Hazardous Locations. All EXAIR Cabinet Cooler Systems are CE compliant, and are built to last with no moving parts to wear out. Applications include cooling control panels, motor control centers, CCTTV cameras, laser housings and much more. https://exair.co/184-atexss

04/29/24, 05:50 AM | Supply Chain, Engineering | EXAIR
Subscribe to Newsletter
More Supply Chain News | Stories | Articles

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
More Products
Feature Your Product