KROHNE to Exhibit at Petfood Forum 2024

Experts to demonstrate a variety of products ideal for food processing applications at booth #2441


Contact: Kristin Nugent
McNeil, Gray & Rice Inc.
(617) 367-0100, ext.148

Beverly, MA: KROHNE, Inc. announces that it will be exhibiting products for food and beverage production at the Petfood Forum 2024, booth #2441, taking place April 29th to May 1st, 2024 in Kansas City, Missouri. On display from KROHNE will be the OPTIMASS EGM, OPTIFLUX 6000, Stainless Steel IFC 100, OPTIBAR 5060, and the OPTISENS TSS 7000.

The OPTIMASS EGM series offers continuous and repeatable mass flow or density measurement with 2-phase flows such as liquids mixed with gas, slurries with gasses, or highly viscous fluids with gas entrainments. Since its introduction, OPTIMASS flowmeters with EGM have proven themselves in 2-phase flow and batch/loading/empty-full-empty applications in various industries, including: food and beverage, chemical, and oil and gas.

KROHNE's OPTIFLUX 6000 is an electromagnetic flowmeter (EMF) for hygienic and sanitary applications. The OPTIFLUX 6000 has a robust stainless steel housing which makes it ideal for hygienic and aseptic operation. It is also fully suitable for CIP and SIP. With a large diameter range of DN2.5 up to DN150, the OPTIFLUX 6000 is suitable for any food & beverage application, and pharmaceutical process connections and insertion lengths.

The stainless steel IFC 100 is an electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors. The IFC 100 offers an alternative to the standard aluminum housing; the new stainless steel housing is "hygienic by design" without pooling or harborage areas where contamination buildup could occur. It features a non-glass display to comply with zoning criteria in food and beverage applications, 2 mm/ 5/64" thick 1.4404/316L stainless steel for superior strength, and ingress protection classes IP66/67/69.

KROHNE's OPTIBAR 5060 is a pressure transmitter for process pressure and level measurement in hygienic and non-hygienic applications with gasses, liquids, and steam. It can be used in open tanks and - as a dual version for electronic differential pressure measurement - also in closed vessels. The pressure device features a piezo resistive or a strain gauge metallic diaphragm. Depending on the measuring cell, the pressure transmitter can operate over a wide process pressure range from 100 mbar / 1.45 psi up to 1000 bar / 14500 psi.

OPTISENS TSS 7000 is a total suspended solids sensor for hygienic applications. The sensor comes with Tri-Clamp or VARIVENT® connection and is particularly suitable for concentration measurement in milk separation, fruit processing and other food and beverage applications. However, it can also be the perfect fit for hygienic concentration measurement of other process industries (e.g. for monitoring steam and cooling water circuits).

For more information, speak with the KROHNE experts in booth #2441 at the Food Processing Expo or visit

KROHNE is a worldwide technological leader in the development, manufacture and distribution of accurate, reliable and cost-effective measuring instruments for the process industries. KROHNE focuses on forming partnerships with its customers to provide them with the most reliable and innovative solutions available in the marketplace. For more information about KROHNE's complete line of measuring instrumentation for the process industries, contact KROHNE at 1-800-FLOWING (978-535-6060 in MA); fax: (978) 535-1720, email:, X, Facebook, or visit

Featured Product

Model TR1 Tru-Trac

Model TR1 Tru-Trac

The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.