binder USA introduces its most compact M5 connector w 360° shielding for interference-free signal transmission

binder USA expanded its series 707 portfolio with an M5 connector designed for use in exceptionally-small spaces. With 360° shielding, the new connector provides reliable signal transmission in industrial environments exposed to electromagnetic interference (EMI). The shielding enables an attenuation level of 60 dB at frequencies around 1 GHz. This connector is also ideal for the miniaturization required in applications such as: ultrasonic sensors, metrology, instrumentation, analytic devices, cobots, and drones, among many others. binder's M5 connector is available in 3- and 4-pin versions, with both straight and angled cable outlets. The screw-locking mechanism offers IP67-level protection against dust, water, shock, and vibration, and meets DIN EN 61076-2-105 specifications.

CAMARILLO, CA - December 1, 2022 - binder USA expanded its series 707 portfolio with an M5 connector designed for use in exceptionally-small spaces. With 360° shielding, the new connector provides reliable signal transmission in industrial environments exposed to electromagnetic interference (EMI). The shielding enables an attenuation level of 60 dB at frequencies around 1 GHz. This connector is also ideal for the miniaturization required in applications such as: ultrasonic sensors, metrology, instrumentation, analytic devices, cobots, and drones, among many others.


binder's M5 connector is available in 3- and 4-pin versions, with both straight and angled cable outlets. The screw-locking mechanism offers IP67-level protection against dust, water, shock, and vibration, and meets DIN EN 61076-2-105 specifications.

"By the end of the year, binder will offer angled panel mount parts with dip solder contacts for PCB assembly, and M5 variants that can be freely assembled in the field," said Guido Werner, Product Manager at binder. "With a wide selection of overmolded cables, panel mount parts, and field-wireable connectors, binder's M5 portfolio will then be complete."

Product highlights:
• binder series: 707
• Pin count: 3 and 4
• Rated voltage: 60 V
• Rated current: 1 A
• Protection level: IP67
• Termination: crimp, dip soldering

For additional information, please visit our product page: Series 707 M5 Connector

Featured Product

Cold air to -50°F (-46°C) from your compressed air supply — with no moving parts!

Cold air to -50°F (-46°C) from your compressed air supply - with no moving parts!

A low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. Vortex tubes can produce: • Temperatures from -50° to +260°F (-46° to +127°C) • Flow rates from 1 to 150 SCFM (28 to 4248 SLPM) • Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.) Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust. EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation. https://exair.co/184_530