New Intesis gateway for easy integration of Modbus RTU slaves to KNX systems

HMS Networks announces a new compact Intesis™ Modbus RTU to KNX gateway that enables easy and fast integration of Modbus RTU slaves to KNX. Fully configurable using the standard ETS tool, it targets small-scale room control applications with up to 100 data points.

HMS Networks announces a new compact Intesis™ Modbus RTU to KNX gateway that enables easy and fast integration of Modbus RTU slaves to KNX. Fully configurable using the standard ETS tool, it targets small-scale room control applications with up to 100 data points.


Compact gateway for small-scale Modbus to KNX integration projects
Room automation projects in commercial applications such as hotels or office buildings are often of small scale, only requiring a limited number of signals from HVAC and metering devices to be integrated into a KNX system. Here, integrators are often faced with connecting rooftop units, fan coils, or meters, but these typically come with Modbus RTU slave connectivity as standard.

Addressing this situation, the new Intesis Modbus RTU to KNX gateway is a cost-effective protocol converter that supports up to 100 data points. Easy to install with a compact form factor, the gateway features Modbus RTU master functionality for seamless integration of any Modbus RTU slave to KNX. With separate interfaces for KNX TP and serial Modbus RTU (RS485) respectively, it enables bidirectional data monitoring and control of the integrated data. Power is supplied by the KNX bus.

Straight-forward configuration using the standard ETS tool
The Modbus RTU to KNX gateway can be configured with the ETS tool which makes configuration easy and seamless for the many KNX professionals who are using the ETS tool daily in their KNX projects. Users also benefit from the fact that the product database can be directly downloaded from the ETS catalog and imported into the integration project.

Certified for KNX and tailored for Modbus devices
Thanks to the KNX connectivity offered with the Intesis gateway, manufacturers now have an opportunity to offer their Modbus-enabled HVAC and metering devices to the KNX market by using the Modbus RTU to KNX gateway as their standard KNX interface. To facilitate integration to KNX, the gateway allows manufacturers to create pre-defined templates that match the Modbus register maps of their devices. With this, KNX integrators can integrate Modbus RTU slaves such as HVAC or metering devices into the KNX network very quickly, while maintaining full data control.

The gateway extends the comprehensive range of already existing Intesis KNX protocol translators and has been certified by the KNX Association in order to guarantee the highest quality standards.

Learn more at www.intesis.com




About HMS Networks

HMS Networks is the leading independent supplier of solutions for industrial communication and the Industrial Internet of Things. HMS develops and manufactures products under the Anybus®, Ixxat® and Ewon® brands. Communication solutions for building automation are offered through the subsidiary Intesis. Development and manufacturing take place at the headquarters in Halmstad, and in Ravensburg, Nivelles, Igualada and Wetzlar. Local sales and support are handled by branch offices in Germany, USA, Japan, China, Singapore, Italy, France, Switzerland, Spain, India, UK, Sweden, Finland, South Korea and UAE, as well as through a worldwide network of distributors and partners. HMS employs over 600 people and reported sales of SEK 1,366 million in 2018. HMS is listed on the NASDAQ OMX in Stockholm, category Mid Cap, Information Technology.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.