Oriental Motor Introduces PKP Series Standard 2-Phase 1.8° and 0.9° Stepper Motor with Electromagnetic Brake

Leading the stepper motor market, now with power-off activated electromagnetic brakes

Oriental Motor is pleased to introduce our new 1.8° and 0.9° PKP Series 2-Phase stepper motor, the leading stepper motor in the market, now preassembled with new Oriental Motor's Original Electromagnetic Brake.


The new PKP Series stepper motors are now available with built-in power-off activated electromagnetic brakes. When power is accidentally cut off due to unexpected events, such as a black out, the electromagnetic brake holds the load in position to prevent it from moving. When the motor is at standstill, it can be held by the electromagnetic brake. The electromagnetic brake can also be used to suppress the heat generated from the motor by switching off the motor current and using the brake as the holding function.

The new PKP Series stepper motors with Electromagnetic Brake type is available in both bipolar and unipolar configurations and in the following frame sizes: 35 mm (1.38 in.), 42 mm (1.65 in.) and 56.4 mm (2.22 in.). PKP26_ models (56.5 mm/2.22 in. frame size) comes with an 8 mm shaft.

The PKP Series with new Oriental Motor Original Electromagnetic Brake key features are:

* Pre-assembled to save time and money
* Power off activated 24 VDC
* 1.8° and 0.9° PKP motors
* Bipolar or unipolar windings

Visit our web site to learn more about the new PKP Series with Oriental Motor Original Encoders and other stepper motors at http://www.orientalmotor.com/products/stepper-motors/stepper-motor-only.html

ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motor's sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.

Featured Product

Sierra Introduces One Complete Industrial Flow Energy Solution

Sierra Introduces One Complete Industrial Flow Energy Solution

Sierra Instruments announces the launch of its new flow energy solution for managing and optimizing flow measurement for industrial facilities of all sizes. It features Sierra's QuadraTherm 640i/780i thermal flow meters, their InnovaMass 240i/241i vortex flow meters, and their new InnovaSonic 207i ultrasonic flow meter. Designed, built, and calibrated in the USA by Sierra, the Big-3TM share the same revolutionary Raptor firmware and many of the same software apps. They are a complete flow energy solution for flows like compressed air, natural gas, steam, and hot and chilled water. Together, they set a new standard in ease-of-purchase, performance, accuracy, reliability, and ease of use.