Inertia Dynamics Spring Applied Brakes for Servo & Stepper Motors
SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position.
SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position. These brakes can be mounted to a flange or motor using thru-holes or tapped holes in the field cup. A conduit box is optional.
SAB brakes have been used extensively for servo brake applications. High temperature coil insulations are available upon request. The SAB brakes are rated up to 1200 Lb-in static torque, and fit motors up to 6.5" OD.
Key Features:
• 12V, 24V, 90VDC or 120VAC windings
• Static torque to 1200 lb-in
• Bore sizes from 3/8" to 1.5"
• Low current consumption
• Low cost
• Metric bores & special voltages available
Click on the link below to view the specification on the Inertia Dynamics family of Spring Applied Brakes-
https://www.servo2go.com/product.php?ID=100511&cat=
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Inertia Dynamics, Servo2Go, Brake, NEMA Brake, Failsafe Brake, Friction Brake, Spring Applied Brake, SAB Series
Featured Product
NORD Delivers Powerful, Reliable Drive Solutions for Demanding Packaging Applications
When you need quality, flexibility and high efficiency, NORD has you covered with complete drive solutions for primary and secondary packaging, end-of-line packaging, and higher-level applications. NORD supports you through the entire life cycle of your drive systems with pre-sales engineering support, online tools, and a global service network. Drive systems for both vertically and horizontally networked technology with all the options for sensor incorporation and integration into the higher-level control system.
