Allied Machine Expands AccuThread T3 Thread Mill Line
New larger sizes of the AccuThread T3 are now available
Allied Machine and Engineering, a leading manufacturer of holemaking and finishing cutting tools for the metal-cutting industry, announces the addition of new sizes to the AccuThread T3 thread mill line. Because of the success of the current line and customer demand for larger sizes, the AccuThread T3 is now available in larger UN and ISO sizes up to 1"-8 and M24x3.0. Machine coding for the new sizes is included in Insta-Code, Allied Machine's online thread mill program generator.
Targeting high-production facilities, tool and die industries and high-temperature applications, the additional AccuThread T3 thread mill sizes create a high-quality thread without the concern of breaking a tool in an expensive workpiece. It is designed to only machine three threads at a time, which reduces tool pressure and dramatically increases the chances of tool survival.
Featured Product
Cold air to -50°F (-46°C) from your compressed air supply - with no moving parts!
A low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts.
Vortex tubes can produce:
"¢ Temperatures from -50° to +260°F (-46° to +127°C)
"¢ Flow rates from 1 to 150 SCFM (28 to 4248 SLPM)
"¢ Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.)
Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust.
EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation. https://exair.co/184_530
