Manufacturing's Finest Hour
Optimising Performance and Manufacturability for Additive Manufacturing
As there are more and more success stories associated with the use of AM as a production technology, scrutiny on the process is becoming increasingly forensic in nature.
Trelleborg Supplies Boeing with Component for 3D-Printed Face Shields
Trelleborg Sealing Solutions, an established provider of solutions to Boeing's aircraft, is supplying a face shield component to the aerospace manufacturer as it joins the urgent effort to assist medical workers on the front lines of the COVID-19 coronavirus pandemic.
KOGANEI to Increase Production of Ventilator Flow Control Valves to Meet COVID-19 Crisis Needs
With the recent announcement that Medtronic has made the design of its Puritan Bennett 560 (PB 560) ventilator available to all manufacturers, the need for ventilator components is rising dramatically. In response, KOGANEI International America, Inc., is preparing to ramp up production of its products used in ventilators to help medical equipment manufacturers.
Allied Motion Produces Motors and Drives for Ventilators and Other Critical Medical Equipment
Allied Motion Technologies (NASDAQ: AMOT) manufactures and delivers critical motion control components, including electronic drives, motors and control assemblies to manufacturers of medical equipment including respirators, ventilators, infusion pumps, medical fluid pumps and other breathing assist equipment required to care for patients with respiratory issues including the coronavirus.
Tolomatic develops open-source, low-cost ventilator actuation prototypes for COVID-19 patients
In an effort to support the global need for medical ventilators, Minnesota-based Tolomatic has dedicated a team of engineers to the development of highly efficient emergency ventilator concept systems using electric linear actuators. The proposed technologies are the first step in creating innovative emergency ventilators for patients around the world.
Cintec™ Fire Resistant Anchors
In view of the recent fires and loss of life in refurbished buildings, Cintec™ has been fully aware of the danger of fire and has always produced fire resistant remedial anchors and reinforcement.
DesignCore Carrier Board for NVIDIA Jetson Xavier NX Module Provides 12 Camera/Sensor Inputs to Enable Complex Edge AI Systems
D3 Engineering today announced its new DesignCore® Carrier Board, which allows engineers to quickly connect multiple cameras or sensors with the recently launched NVIDIA Jetson Xavier NX module to enable AI at the edge.
ISG Smartalks™ Webinar to Focus on Using Automation to Maintain Business Operations in Crisis
April 16 event will explore how automation can address business challenges during COVID-19 pandemic
PMMI Launches NAM Health Care to Address Member Health Coverage Needs
PMMI Offers Association Health Plan for Employers in Select States
Assessment of Ransomware Event at U.S. Pipeline Operator
The U.S. Cybersecurity and Infrastructure Security Agency (CISA) reported on 18 February 2020 on a ransomware incident impacting a natural gas compression facility at an unidentified U.S. pipeline operator.
How Manufacturing Can Rise from the Ashes of the Old Norms, Stronger and Better
From challenging times comes opportunity, and British manufacturers must embrace this in order to navigate through the 'old norms' into the 'new now'. Below I explore the key trends emerging in the sector.
FAIRBANKS SCALES ANNOUNCES NEW WF SERIES FORKLIFT SCALE
Converts most forklifts into a precision scale in minutes
CINTEC NORTH AMERICA ANNOUNCES RESTORATION AND ANCHORING WORK ON MASSEY HALL, FAMED CANADIAN CONCERT VENUE
North American firm helps complete restoration of historic Toronto building
Neurophotometrics and Markforged Announce New 3D Printed Nasal Swab that Provides Better Accuracy than Current COVID-19 Testing Standard in Initial Study
Neurophotometrics, Rady Children's Hospital-San Diego, SCREEN, and University of California San Diego collaborated to develop and test the 3D printed swab
Records 7471 to 7485 of 11981
First | Previous | Next | Last
Engineering - Featured Product
FLIR Si1-LD - Industrial Acoustic Imaging Camera for Compressed Air Leak Detection
The FLIR Si1-LD is an easy-to-use acoustic imaging camera for locating and quantifying pressurized leaks in compressed air systems. This lightweight, one-handed camera is designed to help maintenance, manufacturing, and engineering professionals identify air leaks faster than with traditional methods. Built with a carefully constructed array of MEMS microphones for high sensitivity, the Si1-LD produces a precise acoustic image that visually displays ultrasonic information, even in loud, industrial environments. The acoustic image is overlaid in real time on a digital image, allowing you to accurately pinpoint the source of the sound, with onboard analytics which quantify the losses being incurred. The Si1-LD features a plugin that enables you to import acoustic images to FLIR Thermal Studio suite for offline editing, analysis, and advanced report creation. Field analysis and reporting can also be done using the FLIR Acoustic Camera Viewer cloud service. Transferring of images can be managed via memory stick or USB data cable. Through a regular maintenance routine, the FLIR Si1-LD can help facilities reduce their environmental impact and save money on utility bills.
Manufacturing and Automation - Featured Company
BigRep
Founded in 2014, BigRep set sail to transform the 3D printing and manufacturing business. With its 1m3 volume, the BigRep ONE opens the gateway to a new dimension of 3D printing and 3D manufacturing, while the BigRep STUDIO allows fast and precise large-scale 3D printing. From furniture to vehicles to robotics, we think everything is possible. We want you to envision everything from human scale robot parts, sculptural artworks in all their full-dimensional glory, and dream the impossible world-changing designs of tomorrow while enabling you to print them today using one of our 3D printers.
