How to Break Free From the Dependence on Intuition and Unique Skills in Maintenance Work
Why does maintenance work tend to become narrowly focused so that it becomes virtually inaccessible to most people?
binder USA Introduces Safety Clip for Snap-in Connectors: Added Security for High-Stress Applications
binder USA introduced a new accessory for its 620 and 720 Series miniature and subminiature connectors. New safety clips increase the security of circular connectors in applications where reliability is critical. The clips feature three snap-in lugs that produce an audible click to confirm when the connector is properly latched. For additional protection, these locking clips can also be fastened with cable ties. Additionally, connecting and disconnecting can be done quickly, using just one hand.
binder's safety locking clips are ideal for applications that place considerable physical stress on connectors, such as cable tension, and it is crucial that connections are not interrupted or loosened. Examples include suspended lights, cable tension in cable ducts, as well as safety testing where operators require reliable protection against accidental or malicious separation of the connection.
NORD DRIVESYSTEMS' Condition Monitoring Solution Makes Predictive Maintenance a Reality for Efficiency-Focused Plant Operations
NORD's Condition Monitoring solution utilizes the internal PLC within their variable frequency drives to integrate drive-related actuators and sensors into a system, detecting undesired operating conditions at an early stage to avoid critical system problems and costly downtime.
Successfully Implement a Cobot into your Operations: Step 2 - What Role Do Integrators Play In This Process?
An integrator will definitely get the job done, but beware of a few potential pitfalls. Not all integrators are familiar with cobots. Those who treat the project like an industrial robot can negate many of a cobot's benefits.
Industry digitization: Progesys and Asystom form an international partnership
Asystom and Progesys proudly announce an international partnership. Progesys will implement Asystom's predictive maintenance technology in the mining, metal, and oil and gas industries of Canada and Brazil.
UltraFlex performing induction curing for automotive parts within 60 sec, under strict temperature
By using induction-based curing for this process and thanks to the precise, digital control on the temperature of the heated parts, the manufacturer would achieve a time- and cost-efficient process that would ensure no damage to the paint.
SMAC Moving Coil Actuators has released the new LCS25 Measurement Tool.
The SMAC Measurement Tool addresses the limitations of using a traditional Height Gauge.
Indiana Tech Firm Builds "Plant of the Future." Five Business Trends Driving Technology Adoption on Factory or Warehouse Floor.
Building "Plant of the Future" for manufacturing, supply chain businesses
Bosch's new 300-millimeter wafer fab
Six reasons why it is one of the world's most modern chip factories
Project Modeling: A New Way to Think of CPQ Software for Large Engineer-to-Order Manufacturers
Creating accurate project proposals takes a lot of time and resources. You have to gather information from lots of different departments and people. There are a couple ways this can go from there.
How quality leaders drive business continuity
Through no fault of its own, quality management has developed a bad reputation in many organizations - treated merely as a tick box exercise that has to be completed. However, the pandemic has highlighted just how important quality is for an organisation.
New Turnkey Solutions from Maplesoft Provide Full-Service Virtual Commissioning Solutions to Machine Builders
New release of MapleSim Insight supports low-cost, digital twin-based solutions
Hexagon and Plex Systems Announce Partnership to Deliver Smart Manufacturing Solutions
The new partnership will provide manufacturers a path to greater automation and Industry 4.0 adoption
Bosch Rexroth performs handling tasks mechatronically - the quick and easy way
New Smart Function Kit for Handling drastically reduces the engineering outlay and allows commissioning with just a few clicks
The Machine Control Architecture That Adapts to Ever Changing Market Requirements in the IoT Era
These success stories seek to highlight the industry-level challenges faced, the resulting automation and motion control requirements that need to be addressed, the results that can be achieved and the key platform strategy.
Records 4621 to 4635 of 9520
First | Previous | Next | Last
Automation & IIoT - Featured Product
MOTION CONTROLLERS FOR MINIATURE DRIVES AND MICRODRIVES
FAULHABER has added another extremely compact Motion Controller without housing to its product range. The new Motion Controller is ideal for integration in equipment manufacturing and medical technology applications. With 36 V and 3 A (peak current 9 A), it covers the power range up to approx. 100 W and is suitable for DC-motors with encoder, brushless drives or linear motors.
