TerraMax technology provides force multiplication and protects troops
Dual Electronics Partners with Arclarity to Develop Sense-and-Avoid Solution for Drones to Avoid Collisions and Airspace Violations During Autonomous Flights
The Solution Utilizes Real-Time GPS, ADS-B Delivered Traffic and TFRs plus Airspace Information to Continually Monitor and Adjust the Flight Path in Real Time
DeWys Manufacturing Creates a Customized Robotic Weld Cell
Patti Engineering Completes Infrastructure Automation Project for Siemens Water and Wastewater Project
Patti Engineering releases details on completed water and wastewater infrastructure automation project for the city of Fair Oaks Ranch, TX; engineering team made improvements to allow central control, remote equipment management, save energy, and reduce operating costs.
SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position.
From IEEE Spectrum: Unmanned aircraft must weigh less than 55 lbs. (25 kg). Visual line-of-sight (VLOS) only; the unmanned aircraft must remain within VLOS of the operator or visual observer. At all times the small unmanned aircraft must remain close enough to the operator for the operator to be capable of seeing the aircraft with vision unaided by any device other than corrective lenses. Small unmanned aircraft may not operate over any persons not directly involved in the operation. Daylight-only operations (official sunrise to official sunset, local time). Must yield right-of-way to other aircraft, manned or unmanned. May use visual observer (VO) but not required. First-person view camera cannot satisfy “see-and-avoid” requirement but can be used as long as requirement is satisfied in other ways. Maximum airspeed of 100 mph (87 knots). Maximum altitude of 500 feet above ground level... (full article)
KBM™ Series Frameless Servo Motors Deliver High Performance for Tightly Integrated Motion Applications
Introducing a new family of motors from Kollmorgen - the KBM™ Series Frameless Brushless Motors. Its inherent features and resulting performance attributes make the KBM a perfect fit for applications that demand a flexible, highly optimized motion solution.
By the end of 2017, an estimated two million industrial robots will be operating in factories around the world.
he Mohamed Bin Zayed International Robotics Challenge intends to attract the world's best and brightest in robotics
At PackExpo East, TurboFil Packaging Machines will showcase its new Multi-Head Hybrid Capper MH120, the most flexible chuck capper available for speeds up to 120 bpm. The second introduction, Reditrace Pharmaceutical Track and Trace, is a new cloud based system that makes all required data available from any location.
Critics of automation claim robots are out to replace people. The near future will show that people are definitely in control and will be able to leverage technology for greater profitability and professional satisfaction.
If uninterrupted conversations between cars make driving safer, then self-driving cars will become safer as well.
Free App for Smartphones and Tablets Has Everything Pilots Need to Plan, Fly and Track Any 3DR-Powered Drone; Open-Source Code Allows Programmers to Build or Alter Features
HEIDENHAIN is proud to announce the addition of its new slim-design ECI 1118 rotary encoder to its expansive product line. With a thickness of only 10mm and a diameter just less than 37mm, the new absolute ECI 1118 encoder offers motor manufactures more flexibility within their design, including the ability to fit into compact applications while still retaining the high quality feedback and speed control for which HEIDENHAIN is well known.
From iaac: Minibuilders was conceptualized as a community of three modestly sized robots which were tasked with very specific jobs that aggregated to a large scale operation. Each robot completes its programmed job in sequence to fully construct an automated, inhabitable structure... (full article)
Records 4231 to 4245 of 4345
Additive & 3D Printing - Featured Product
Xometry is your source for custom parts. Now, in addition to getting instant quotes on 3D Printing, CNC Machining, Sheet Metal, and Injection Molding, customers can create and send RFQs for die casting, stamping, and extrusion work to our nationwide network of pre-vetted manufacturers with just a 2D drawing. You will receive and be able to review responses from qualified shops within 7 days on an advanced web-based RFQ management platform. To learn more go directly to our site to issue and RFQ today. Stop wasting time managing RFQs through email and by phone, and start issuing RFQs at scale and in the cloud.