Stephen Hawking fears robots could take over in 100 years
By Sharon Gaudin for ComputerWorld: Worried that one day we'll have robot overlords? You're in good company.
Reknowned physicist, cosmologist and author of A Brief History of Time, Stephen Hawking said this week that robots, powered by artificial intelligence (A.I.), could overtake humans in the next 100 years.
Speaking at the Zeitgeist conference in London, Hawking said: "Computers will overtake humans with AI at some within the next 100 years. When that happens, we need to make sure the computers have goals aligned with ours," according to a report in Geek.
This isn't the first time Hawking has spoken about the threat that comes along with machine learning, A.I. and robotics.
In December, Hawking said, "the development of full artificial intelligence could spell the end of the human race."
'First heavy-duty collaborative robot' can lift 35kg
Fanuc claims that it is the first robot manufacturer to produce a heavy-duty robot designed to work safely alongside humans. Its CR-35iA robot can perform tasks involving payloads of up to 35kg without needing the protective guards and fences that have previously been needed for robots with similar lifting capacities.
Although there are already several other collaborative robots on the market, most are designed for much lower payloads.
The new robot will stop automatically if it touches a human operator. A soft covering material also reduces the force of any impacts and prevents human operators from being pinched by the mechanism. And if the robot comes too close to an operator, they can simply push it away. The covering has a green colour to distinguish it from Fanuc’s usual yellow robots.
The six-axis robot is designed for duties such as transferring heavy workpieces or assembling parts. By avoiding the need for safety barriers, it is claimed to improve production efficiencies and allow higher levels of automation.
Building Enthusiasm for Construction Robotics
Vicki Speed for Inside Unmanned Systems: It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal. The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense.
Demolition Days
Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade.
Robotic Building Blocks
The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors.
Bionic Builders?
While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.
Microsoft HoloLens gets real with robotics, surgery, architecture
Jared Newman for PCWorld: At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.
The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.
For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.
Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.
Fetch Robotics' Fetch & Freight
From Fetch Robotics (the core team from Unbounded Robotics/all former employees of Willow Garage):
The Fetch Robotics’ system is comprised of a mobile base (called Freight) and an advanced mobile manipulator (called Fetch). Fetch and Freight can also use a charging dock for autonomous continuous operations; allowing the robots to charge when needed and then continue on with their tasks. In addition, the system includes accompanying software to support the robots and integrate with the warehouse environment. Both robots are built upon the open source robot operating system, ROS.
Fetch is an advanced mobile manipulator, including features such as:
Telescoping spine with variable height from 1.09 to 1.491 meters
Capacity to lift approximately 6 kgs.
3D RGB Depth Sensor
Back-Drivable 7DOF Arm
Modular Gripper Interface
Head Expansion Mount Points
Pan-Tilt Head
Differential Drive
ROS-Enabled
Freight is a modular base, used separately or in conjunction with Fetch. Features include:
Base Expansion Mount Points
Payload support of approximately 68 kgs.
2D Laser Scanner
Stereo Speaker
Computer Access Panel
Run-Stop
ROS-Enabled
( full press release )
Planting Trees With Drones
From The Independent:
A drone start-up is going to counter industrial scale deforestation using industrial scale reforestation.
BioCarbon Engineering wants to use drones for good, using the technology to seed up to one billion trees a year, all without having to set foot on the ground... ( cont'd ) ( projects website )
NHL Goal Celebration Hack With A Hue Light Show And Real Time Machine Learning
From François Maillet:
In Montréal this time of year, the city literally stops and everyone starts talking, thinking and dreaming about a single thing: the Stanley Cup Playoffs. Even most of those who don’t normally care the least bit about hockey transform into die hard fans of theMontréal Canadiens, or the Habs like we also call them.
Below is a Youtube clip of the epic goal celebration hack in action. In a single sentence, I trained a machine learning model to detect in real-time that a goal was just scored by the Habs based on the live audio feed of a game and to trigger a light show using Philips hues in my living room... ( full article )
AGROBOT: Strawberry Harvesters
From AGROBOT:
AGB® manages a set of robotic manipulators able to locate and identify your strawberries, selecting them based on their size and degree of ripeness.
This system analyzes your fruit one by one, and it is responsible for ordering cutting movements that guarantee accuracy, smoothness, and sensitivity in the strawberry treatment. The fruit, picked with the strictest hygiene conditions, is driven by our FlexConveyor System to the packaging area. Select the ripeness you would pick up.
AGvision ® is an artificial vision system that identifies your fruit with maximum accuracy and consistency. Its advanced technology, implement in real time a protocol for morphological and color analysis which systematically return the ripeness of the fruit, discriminating exclusively those strawberries which meets the quality standards previously set by the farmer... ( more details )
Rethinks New Robot: Sawyer
From Rethink:
Introducing Sawyer – the revolutionary new high performance collaborative robot designed to execute machine tending, circuit board testing and other precise tasks that are impractical to automate with industrial robots.
Smaller Footprint, Longer Reach
Smaller and lighter weight than Baxter, and with 7 DOF and a 1026 mm reach, Sawyer can maneuver into the tight spaces and varied alignments of work cells designed for humans.
International Availability
With a base price of $29,000, Sawyer will initially be available in North America, Europe, China and Japan, with limited availability beginning in mid-2015.
Intera 3
Like Baxter, Sawyer is powered by the industry’s best and most intuitive software platform, Intera. It features the same iconic “face” screen (with a refreshed and even more expressive design) that helps it communicate with co-workers, along with the train-by-demonstration user interface that revolutionized how robots can be deployed on factory floors. Sawyer runs on the same version of Intera as Baxter, and will continue to evolve and improve with regular upgrades... (more details) (more about Intera software)
Star Wars' BB-8
From the new Star Wars:
NASA's Modular Robotic Vehicle (MRV)
From NASA at the Johnson Space Center:
3D Robotics' Solo
From 3D Robotics:
Today 3DR announced Solo, an all-in-one personal drone whose ease of use and powerful new features kick off a new aerial age. With computing power unmatched in the industry—from two integrated Linux computers, one on the craft and one in the controller—Solo delivers several world-first technologies, such as unfettered in-flight access to GoPro controls, including wireless HD streaming straight to mobile devices, and effortless computer-assisted Smart Shot flight features that allow even new pilots to capture professional aerial video from day one.
Computer-assisted cinematography
Solo’s intelligence unlocks powerful and one-of-a-kind computer-assisted Smart Shots (patent pending). Just set up the exact shot you want in real time, then tap “play” on the app and Solo will execute it with a level of precision and a soft touch that even seasoned cinema pilots can’t match. And with a list of Smart Shots to choose from, the perfect shot is always just a few taps away. Cable cam and Orbit allow you to create a known and safe flight path along a virtual track in space, freeing you to shift your focus to getting the shot you want; or simply hit “play” and let Solo fly itself while simultaneously working the camera for you, as smooth and even as an expert cameraman. Follow mode lets you go completely hands-free, while Solo keeps up with your every move. Solo also features a one-touch aerial Selfie for a dramatic and customizable establishing Smart Shot of you and your surroundings. It’s all in service of Solo’s guiding principle: Get the shot. Every time.
Stream HD GoPro video to mobile devices or through HDMI
Solo is the world’s first drone to wirelessly deliver HD video from your GoPro to your iOS or Android mobile device, at ranges of up to half a mile. Solo’s controller has HDMI output for live HD broadcast—to FPV goggles, high-quality field monitors, Jumbotrons at live events, even news vans—and with a staggeringly low video latency your live video is immediate and fluid for an “in-the-moment” feel. For instant social sharing of your aerial videos, you can even record the live video stream directly from the mobile app to your device’s camera roll... ( full details )
DJI Phantom 3
From DJI:
More videos and complete specs... ( here )
QinetiQ North America Introduces DriveRobotics
From QinetiQ North America:
By transforming manned industrial vehicles into unmanned robots, DriveRobotics™ add-on applique kit lets building demolition and roadside construction companies convert to unmanned operations whenever operators face hazardous situations. This commercial robotic system, which can also be installed in new vehicles and existing fleets, eliminates need for spotter. Remote-control capabilities enable or facilitate machine use in demanding applications... ( full press release )
Gear Generator
About Gear Generator:
Gear Generator is a tool for creating involute spur gearsand download them in SVG format. In addition it let you compose full gear layouts with connetcted gears to design multiple gears system with control of the input/output ratio and rotation speed. Gears can be animated with various speed to demonstrate working mechanism... ( link )
Records 391 to 405 of 432
First | Previous | Next | Last
Additive & 3D Printing - Featured Product
bigrep PRO - INDUSTRIAL QUALITY MEETS COST EFFICIENCY. COMPLEX PARTS IN LARGE SCALE.
The BigRep PRO is a 1 m³ powerhouse 3D printer, built to take you from prototyping to production. It provides a highly scalable solution to manufacture end-use parts, factory tooling or more with high-performance, engineering-grade materials. Compared with other manufacturing and FFF printing solutions, the PRO can produce full-scale, accurate parts faster and at lower production costs.
