Lake fire grew after private drone flights disrupted air drops

As a hot wind shifted north and drove the flames toward Onyx Peak east of Big Bear Lake, fire crews deployed to save homes scattered among brittle-dry pines — waiting for help from a DC-10 laden with 10,800 gallons of retardant.

It never came. Shortly before 6 p.m. on Wednesday, an incident commander on the ground spotted a hobby drone buzzing near the drop site at 11,000 feet. The air tanker had to turn back, as did two smaller planes following it.

“These folks who are handling these drones, I have to assume they have no idea what they're doing,” Chon Bribiescas, a spokesman for the U.S. Forest Service, said Thursday. “They not only endangered the folks on the ground, but they endanger the pilots.”

Officials fighting the Lake fire in the San Bernardino Mountains scrambled to warn the public that it is illegal and dangerous to fly drones in restricted airspace around a fire. Unmanned aircraft are particularly hazardous because authorities have no idea who is controlling them or how they might maneuver.  Cont'd...

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Bitflow is the leader in CoaXPress

Bitflow is the leader in CoaXPress

With the introduction of its Cyton and Karbon CXP frame grabbers, BitFlow has established itself as the leader in CoaXPress (CXP), a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. With CXP, video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data). BitFlow CXP frame grabbers open the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.