Smith & Loveless Inc. Highlights the PISTA® TURBO™ Grit Washer
Triple-Action Washing Ensures the Removal of Abrasive Particles
Employing TRI-CLEANSE TECHNOLOGYâ„¢, the PISTA® TURBOâ„¢ Grit Washer delivers clean, dry grit with less than 5% organic material. This process minimizes odors associated with putrescible organics and mitigates costs related to landfill restrictions. By incorporating air infusion, water flushing, and grit agitation, the technology ensures thorough cleaning and prepares the grit for disposal in a grit dumpster.
The grit slurry enters from the second stage PISTA® Grit Concentrator, into the PISTA® TURBOâ„¢ Grit Washer's energy dissipation zone to reduce turbulence. Parallel plates in the settling zone enhance the retention of fine grit by providing the surface area required to capture 95% of grit particles down to 100 and even 75 microns, ensuring optimal performance.
The custom-engineered screw auger, available in various lengths to suit specific applications, incorporates mixer fluidizing vanes in the washer hopper and a continuous shaft design off the flight segment. This configuration facilitates effective grit agitation and separation of putrescible content. Additionally, this design prevents contact with the trough, eliminating the need for wear shoes and hardened edges-and associated O&M.
The QUICKSMART® Controller, made specifically for the PISTA® Grit Removal System, provides an intuitive touchscreen for simplified settings and data presentation. A dedicated PLC controller provides the necessary control functions to properly operate the PISTA® TURBOâ„¢ Grit Washer through its various cycles and to control the operation of the air infusion, grit wash water and spray water.
To read and learn more about the superior grit washing of the PISTA® TURBOâ„¢ Grit Washer, visit www.SmithAndLoveless.com.
About Smith & Loveless, Inc.
Founded in 1946, Smith & Loveless Inc. is a global manufacturing leader of engineered systems for the water and mining industries with installations in more than 75 nations around the world. For more information on Smith & Loveless Inc. and its products, visit www.SmithAndLoveless.com, and follow the company on LinkedIn and X (Twitter).
Featured Product
Cold air to -50°F (-46°C) from your compressed air supply - with no moving parts!
A low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts.
Vortex tubes can produce:
"¢ Temperatures from -50° to +260°F (-46° to +127°C)
"¢ Flow rates from 1 to 150 SCFM (28 to 4248 SLPM)
"¢ Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.)
Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust.
EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation. https://exair.co/184_530
