binder USA Introduces Two New Angled Connectors for Confined Spaces

binder USA announced new angled variants of its snap-in 720 and NCC 770 series miniature connectors. A notable design change is the addition of a threaded ring between the contact body and the angled housing. This enables connectors to withstand loads that far exceed standard requirements, even when the force is applied at an angle to the connector axis. Another enhancement is that the contact body can be rotated in steps of 90°, allowing the user to choose the direction of the cable outlet. (Cable routing is often problematic for housings angled at 90° because bending the cable precisely can be difficult.) To address this, binder used an angle of 100° for the new housings, considerably simplifying cable assembly. Key applications include lighting and heating technology, medical devices, mobile and laboratory instrumentation and metrology, and handheld control devices


binder USA Introduces Two New Angled Connectors for Confined Spaces

CAMARILLO, CA, July 15, 2023 - binder USA announced new angled variants of its snap-in 720 and NCC 770 series miniature connectors. A notable design change is the addition of a threaded ring between the contact body and the angled housing. This enables connectors to withstand loads that far exceed standard requirements, even when the force is applied at an angle to the connector axis.

Another enhancement is that the contact body can be rotated in steps of 90°, allowing the user to choose the direction of the cable outlet. (Cable routing is often problematic for housings angled at 90° because bending the cable precisely can be difficult.) To address this, binder used an angle of 100° for the new housings, considerably simplifying cable assembly.
Key applications include lighting and heating technology, medical devices, mobile and laboratory instrumentation and metrology, and handheld control devices

Features:
· Locking system: snap-in (720 series), bayonet (770 series)
· Termination: solder
· Pin count: 3-pin to 12-pin (720 series), 8-pin (770 series)
· Rated voltage: 60 V to 250 V (720 series), 175 V (770 series)
· Variable cable outlet
· Protection degree: IP67 (connected)
· Mating cycles: > 500 (720 series), > 5,000 (770 series)
· Available in red, green, blue and white (RAL 9002)

For additional information on this product, visit www.binder-usa.com.

Featured Product

ELATEC RFID Systems – Ensure only those authorized have access

ELATEC RFID Systems - Ensure only those authorized have access

With a tap of the badge, RFID readers from ELATEC provide secure, reliable and easy-to-use user authentication, access control and usage tracking of hardware and software in industrial automation processes. Reader durability in harsh plant floor environments is another essential feature. Choose the right authentication and access control solution and extend RFID card-based capability for the access control of PLC, robot and HMI automation controller software and devices requiring special operator training.