Miniature Micropositioning Stages come in X, XY, and XYZ Configurations
The compact M-110, M-111, and M-112 miniature linear stage family from PI is designed for precision positioning, alignment, and micro-motion applications in confined spaces.
Auburn, MA - PI's M-110, M-111 and M-112 miniature linear stage family is designed for micropositioning applications where high resolution and repeatability is required with resolutions down to 0.05 microns (50 nanometers). Closed-loop servo motors with position encoders and economical stepper motors are available, as well as a choice of leadscrew and ballscrew drives. Travel ranges of 5mm, 15mm, and 25mm are offered.
XY / XYZ Miniature Stages for Multi-Axis Positioning and Alignment Applications
The miniaturized design allows for extremely compact XY and XYZ multi-axis assemblies. XY stages can be assembled of two miniature stages without the need for adapters. An angle bracket is available for XYZ stage assemblies.
Combination with XYZ Piezo Scanner for Fast Optics and Photonics Alignment
For the most demanding applications, where nanometer precision and high scanning speed are required, for example in optics and photonics alignment applications, a low inertia XYZ piezo scanner option is also available.
More Information on the M-110 / M-111 and M-112 Miniature Micropositioning Stages
Applications for the Miniature Micropositioning Stages
The miniature stages are designed for applications such as precision micro assembly, laser inscription, microscopy, alignment of optical and mechanical components.I Americas
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
