binder USA announced a new short version of its popular series 423 M16 connector. These compact shieldable cable plugs and sockets, each with cable clamp, are available in 10 solder and 5 crimp male and female versions to suit various pin counts. They are ideal for applications where space is tight and IP67-level protection is required, such as sensor and actuator technology, test and measurement, automation and industrial controls, and process technology.

binder USA Introduces Short Version of Series 423 M16 Connectors

Designed for interference-prone, space-constrained applications

CAMARILLO, CA - March 1, 2021 - binder USA announced a new short version of its popular series 423 M16 connector. These compact shieldable cable plugs and sockets, each with cable clamp, are available in 10 solder and 5 crimp male and female versions to suit various pin counts. They are ideal for applications where space is tight and IP67-level protection is required, such as sensor and actuator technology, test and measurement, automation and industrial controls, and process technology.

Solder versions are designed for maximum wire gauges of 0.75 mm2 or AWG 18 (2 to 8 pins), and 0.25 mm2 or AWG 24 (12 to 19 pins). Rated voltages are 32 V or 150 V, depending on the pin count, with rated impulse voltages 500 V or 1.500 V, respectively. Rated currents at 40 °C range from 3 A to 7 A. All solder products are equipped with brass contacts as well as bronze sockets and are specified for a temperature range from -30 °C to +95 °C.

Crimp products are designed for wire gauges of 0.14 to 1.0 mm2 or AWG 26 to AWG 18 (4 to 6 pins), and for 0.14 to 0.75 mm2 or AWG 26 to AWG 20 (7 to 8 pins). Rated voltages are 32 V or 150 V, with rated impulse voltages are 500 V or 1500 V,and the rated currents are 5 A or 6 A, respectively. The temperature range extends from -40 °C to +100 °C.

Product highlights include:
• binder Series: 423
• Pin count: 2 to 19 (others upon request)
• Mating cycles: >500
• Degree of protection: IP67
• Termination: solder or crimp
• Locking technology: screw lock
• Housing and locking: Nickel-plated brass

For more information, please visit www.binder-usa.com.


Media Contacts:
Paul Pulkowski | binder USA | paul.pulkowski@binder-usa.com | Tel: 805.437.9925
Julie Eleftheriou | Longren & Parks | julie@longrenparks.com | Mobile: 952.913.3065
 
About Binder USA, LP
Binder USA, LP, is a subsidiary of binder Group, a leading global manufacturer of circular connectors, custom cordsets, and LED lights. binder USA products are used around the world in industrial environments for factory automation, process control, and medical technology applications. Defined by technical innovation and traditional values, the binder name is synonymous with the highest standards of quality and reliability. The company's quality management system is ISO 9001 and 14001 certificated, but it is a solution-focused approach to customer applications and commitment to superior service that truly differentiates binder from the competition.

For more information, visit www.binder-usa.com or email sales@binder-usa.com.