Compressed Air Open Blowing White Paper

Visit https://exair.co/caob184old for further information

Compressed air is a limited resource that is generated in-house for the benefit of many operations within the manufacturing environment. Learn how to ensure all point of use applications are using your compressed air in the most effective and efficient way possible.

02/18/21, 07:55 AM | Supply Chain, Engineering | EXAIR

Compressed air is a limited resource that is generated in-house for the benefit of many operations within the manufacturing environment. Learn how to ensure all point of use applications are using your compressed air in the most effective and efficient way possible.

If an open, unchecked water pipe was being used to cool a machining process, the excessive volume of liquid being used would be obvious to see as it pooled on the floor. It would be clear that you would want to test lower flow rates that would conserve water and save money yet still effectively cool the part. But if an open compressed air line was being used to perform the same process, it would be much more difficult to envision the large volume of compressed air that could be wasted while trying to cool the same part.
Since compressed air generation is every bit as important to most factories as a supply of water, it only makes sense to consider ways to conserve it and reduce its expense. Learn how much it costs to produce that compressed air. Register and download the white paper, "Compressed Air Open Blowing," to learn the options available for reducing compressed air waste while still delivering the desired performance. https://exair.co/caob184old

02/18/21, 07:55 AM | Supply Chain, Engineering | EXAIR
Subscribe to Newsletter
More Supply Chain News | Stories | Articles

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
More Products
Feature Your Product