Large Selection of Cabinet Coolers are available!
Cabinet Coolers stop electronic control downtime due to heat, dirt, and moisture. They are a low cost, reliable way to cool and purge NEMA 4, 4X and 12 electronic control panels. New models are even available for NEMA 4 and 4X Hazardous Locations.
Cabinet Coolers stop electronic control downtime due to heat, dirt, and moisture. They are a low cost, reliable way to cool and purge NEMA 4, 4X and 12 electronic control panels. New models are even available for NEMA 4 and 4X Hazardous Locations.
Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air and are available with or without a thermostat. Continuous operation models are recommended when constant cooling and a constant positive purge are desirable. Thermostatic models are recommended when heat load fluctuates and cooling is not always needed.
First determine the type of enclosure you have, then decide if continuous operation or thermostat control is needed. The next step is to calculate the heat load for your enclosure. Models are available from 275 Btu/hr (69 Kcal/hr) to 5,600 Btu/hr (1,411 Kcal/hr). Application Engineers are available online to help you with this task or you can use a convenient sizing guide available at https://exair.co/sizing.
Cabinet Coolers install in minutes, are quiet, stabilize enclosure temperature and have no moving parts - which makes them maintenance free. Learn more about how these Cabinet Coolers helped one company with their overheating problems in the White Paper "Cabinet Coolers End Costly Shutdowns". www.exair.com/184/Cab_Coolers_MTOM.htm
EXAIR is offering a special right now on all Cabinet Coolers. Learn more at www.exair.com/184/ccpromo.htm
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
