New Hot Tap Digital Flowmeters Simplify Installation

EXAIR's new Hot Tap Digital Flowmeters allow installation when compressed air piping is under pressure. By eliminating the need to isolate and remove pressure from the pipe, these compressed air flowmeters reduce installation time while maintaining safety. Hot Tap Digital Flowmeters incorporate two valves that the measuring probes pass through. A sound muffler that also collects chips from the drilling process eliminates installation debris from entering the airstream and minimizes noise exposure. Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks and optimizing air use.

EXAIR's new Hot Tap Digital Flowmeters allow installation when compressed air piping is under pressure. By eliminating the need to isolate and remove pressure from the pipe, these compressed air flowmeters reduce installation time while maintaining safety. Hot Tap Digital Flowmeters incorporate two valves that the measuring probes pass through. A sound muffler that also collects chips from the drilling process eliminates installation debris from entering the airstream and minimizes noise exposure. Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks and optimizing air use.

Each meter ships with the necessary hardware and tools for installation including drill bit, drill guide, chip capturing muffler, and hex wrenches. The Hot Tap feature is available on 2 inch through 8 inch flowmeters. They are available in standard units which display airflow values on a bright LED screen, with optional data logger to capture and manipulate the data, or with wireless capability to transmit the data securely over a wireless network. Airflow values are expressed in Standard Cubic Feet per Minute or Cubic Meters per Hour.
Hot Tap Digital Flowmeters for schedule 40 iron pipe and Type L Copper are now available in sizes 2 inch, 2-1/2", 3", 4", 6" and 8". They are CE and RoHS compliant and can also be ordered for schedule 80 or 10S pipe. www.exair.com/184/hottap.htm

Featured Product

New M12 A-Coded Connectors from binder are now Ecolab and FDA certified

New M12 A-Coded Connectors from binder are now Ecolab and FDA certified

binder USA, LP, has expanded the M12 product family with the addition of the M12 A-Coded Connector, which is now certified for both Ecolab and FDA Code of Federal Regulations (CFR) Title 21 standards. The M12 A-Coded connectors are extraordinarily durable and IP69K-rated, ideal for harsh-duty and washdown applications in the food and beverage, pharmaceutical, and chemical industries. Available in 3, 4, 5, 8, and 12 contacts, the high quality stainless steel locking rings (V4A) and gold contact plating can also withstand UV exposure and shock and vibration.