HazLoc Cabinet Coolers Approved for Class I Div 1

EXAIR's new Hazardous Location Cabinet Cooler® Systems have been set apart from the competition by achieving the UL classified designation for Div1 environments. They have been tested by UL and passed their stringent requirements for use upon classified purged and pressurized electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G - and Class III environments. The cooling capacity of up to 5,600 Btu/hr. is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.

EXAIR's new Hazardous Location Cabinet Cooler® Systems have been set apart from the competition by achieving the UL classified designation for Div1 environments. They have been tested by UL and passed their stringent requirements for use upon classified purged and pressurized electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G - and Class III environments. The cooling capacity of up to 5,600 Btu/hr. is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.


EXAIR HazLoc Cabinet Coolers circulate 20°F (-7°C) air inside the enclosure to prevent high temperature faults. They mount in a standard electrical knockout while keeping the NEMA 4 or 4X rating of the enclosure. Cabinet Cooler Systems include an auto drain filter separator to ensure no moisture passes to the inside of the electrical enclosure. An optional thermostat control minimizes compressed air use and keeps the enclosure at ± 2ºF of the setting.

EXAIR's full line of Cabinet Cooler Systems are available for NEMA 12, 4 and 4X enclosures from 275-5,600 Btu/Hr and are UL listed and CE compliant with no moving parts to wear out. Applications include cooling control panels, PLC's, microprocessors, fractional Hp variable frequency drives and robotics. www.exair.com/184/hazloc.htm

Featured Product

Vacuums chips directly into an open-top drum with no

Vacuums chips directly into an open-top drum with no

EXAIR's Chip Vac picks up dry or wet chips and delivers them directly to an ordinary open-top drum. The Chip Vac is used to clean chips fixtures, floors and work surfaces of machining centers, lathes, saws, and other industrial equipment. The powerful suction is ideal for fast and efficient cleaning. The compressed air operated Chip Vac is an industrial duty vacuum designed specifically for vacuuming chips. It creates a powerful direct flow action that vacuums metal, wood or plastic chips into an ordinary drum. minute, the Chip Vac can be removed and easily placed onto another drum to keep different materials separate for recycling. Chip Vacs are available in 5, 30, 55 and 110 gallon sizes. EXAIR is offering a special on all of their Industrial Housekeeping products for a limited time. www.exair.com/184/cvdirold.htm To see video click here: https://exair.co/watchchipvac?pub=184.cvv