New Digital Multimeter from Megger Offers Voltage Range Up to 1000V Trms
The AVO800 series is ideal for maintenance of electrical applications and equipment
Megger now offers digital multimeters for electrical installation and service applications. The AVO800 series offers a voltage range up to 1000V Trms and is designed to reduce the need for additional auxiliary instrumentation, like phase rotation detectors and non-contact voltage wands.
Ideal for maintenance of electrical applications and equipment
Suitable for a wide range of applications, including maintenance of electrical applications and equipment, white goods service and electrical utilities, the AVO800 is developed on the latest DMM chip sets - the measurement control center for the multimeters. This unit offers an optimal range of test functions, such as phase sequence, live circuit detection, low and high input impedance AC and DC voltage measurement and continuity (or resistance testing) down to 0.01 Ohms. All are used in both the electrical and service industries.
This new digital multimeter series offers 0.1% basic accuracy, two wire phase sequence detection for incorrectly wired three phase circuits, resistance from 0.01 Ω to 50 MΩ, conductance and diode measurement, 10 MΩ to 10 KΩ impedance switching, as well a smart capacitance auto switching to low input impedance for capacitance discharge.
Safe and easy to use
Depending on the model of multimeter being used in the AVO800 series, it has a safety category rating of CATIV up to 600V or combined CATIV/CAT III up to 600V/1000V respectively. The series features dual digital display readouts with primary measurements always displayed, two wire phase rotation for establishing phase sequence of 3 phase supplies, live circuit detection with a voltage range from 95 Vac to 100 Vac and protection on all non-electrical measurement modes. The AVO800 series features both AC and DC mode and safety shuttered connection terminals.
For more information contact Peg Houck at peg.houck@megger.com or 610-676-8536.
Access our blog: http://us.megger.com/blog
Watch the latest videos: http://www.youtube.com/user/meggerUS
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
