Air Gun with Variable Flow from the Squeeze of a Trigger

EXAIR's new VariBlast® Compact Safety Air Guns are a small and lightweight cast aluminum air gun capable of handling tough jobs. Because of the engineered variable flow trigger they are able to produce light, medium or heavy force upon a target simply by pulling the trigger. This comfortable and ergonomic air gun has two ¼ NPT air inlets and a storage hanger for convenience. Air consumption of the VariBlast Compact air gun is only 10-17.5 SCFM, depending on the nozzle installed, which is among EXAIR's most efficient air guns. It is capable of producing up to one pound of force, making it a great choice for light to medium duty applications.

EXAIRs new VariBlast® Compact Safety Air Guns are a small and lightweight cast aluminum air gun capable of handling tough jobs. Because of the engineered variable flow trigger they are able to produce light, medium or heavy force upon a target simply by pulling the trigger. This comfortable and ergonomic air gun has two ¼ NPT air inlets and a storage hanger for convenience. Air consumption of the VariBlast Compact air gun is only 10-17.5 SCFM, depending on the nozzle installed, which is among EXAIRs most efficient air guns. It is capable of producing up to one pound of force, making it a great choice for light to medium duty applications.


These CE compliant air guns can use EXAIRs extensions up to 72" long for extended reach and can be purchased with a chip shield. This product line of VariBlast Compact Safety Air Guns utilize EXAIRs 1/8 NPT engineered air nozzles which reduce compressed air use and meet OSHA requirements for dead-end pressure and noise exposure.

All of EXAIRs Safety Air Gun product lines use engineered air nozzles for high performance and safety - designed to maximize safety and minimize air consumption. The Heavy Duty and Soft Grip Safety Air Guns provide higher force for tougher applications. All are available with extension pipes and Chip Shields.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.