Sulzer Announces MIXPACâ„¢ MixCoatâ„¢ Manual Protective Coating Dispensing System
Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, announces the availability of MIXPAC™ MixCoat™ Manual, a member of the innovative MIXPAC™ MixCoat™ cartridge-based 2-component dispensing system family.
Sulzer Announces MIXPAC™ MixCoat™ Manual Protective Coating Dispensing System
Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, announces the availability of MIXPAC™ MixCoat™ Manual, a member of the innovative MIXPAC™ MixCoat™ cartridge-based 2-component dispensing system family. The MixCoat Manual protective coating dispensing system features a lightweight design with a unique brush assembly on a manual dispenser, which greatly increases stripe coating productivity and speed. The MixCoat Manual system is ideal for repairs and rope work on offshore oil and gas, petrochemical, marine, and bridge repair applications.
MixCoat Manual offers efficient, clean and cost optimized repair work with less waste. Unlike older drill mix systems, MixCoat Manual does not require pre-mixing or metering of components. The cartridge-based system features excellent mixing performance and improved ratio control, without the need for mixing equipment. With this system, components are kept separate until forced through the static mixer; this minimizes waste from unused coating. Users no longer need to worry about pot life. Cartridges are available for 1:1, 2:1, 3:1 and 4:1 ratios, ranging from 1500mL to 940mL.
The MixCoat Manual system is extremely efficient, with only one quick squeeze on the trigger needed to start the flow to the brush. The closed loop system prevents the introduction of contaminants into the paint. Its lightweight ergonomic design includes a shoulder strap, enabling workers to have a free hand when performing rope work or for touch up teams working on the side of offshore oil rigs. For more information visit http://bit.ly/2yFKtuA
Featured Product
Model TR1 Tru-Trac
The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.
