binder USA Introduces Series 813, M12 L-Coded Connector: A Male Cable Connector for DC Power Supply Applications
The Series 813 M12 L-coded connector is a panel-mount connector with single wires. (Standard wire length is 200 mm; other lengths are available upon request.) The screw locking mechanism meets the IEC 61076-2-111 standard.
Camarillo, CA - July 18, 2019 - Binder USA, LP announced the Series 813 M12 L-coded male cable connector. With Profinet-compliant plastic housing, this field-wireable connector is ideal for DC power supply applications up to 63 V/16 A. The Series 813 M12 L-coded connector is a panel-mount connector with single wires. (Standard wire length is 200 mm; other lengths are available upon request.) The screw locking mechanism meets the IEC 61076-2-111 standard.
Contacts: 4+FE
Termination: single wires AWG 16
Cable Outlet: 8.0 - 13.0 mm
Rated Voltage: 63 V DC
Rated Current: 16 A
Mechanical Operation: >100 mating cycles
Ingress Protection: IP67
Not shielded
Contact Plating: Au (gold)
For a full list of features and ordering details, please visit www.binder-usa.com.
About binder USA
Binder USA, LP, is a subsidiary of binder Group, a leading global manufacturer of circular connectors, custom cordsets, and LED lights. binder USA products are used around the world in industrial environments for factory automation, process control, and medical technology applications. Defined by technical innovation and traditional values, the binder name is synonymous with the highest standards of quality and reliability. The company's quality management system is DIN ISO 9001 and ISO 9001 & 14001 certificated, but it is a solution-focused approach to customer applications and commitment to superior service that truly differentiates binder from the competition.
For more information, visit www.binder-USA.com, or email sales@binder-usa.com.
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
