Which CNC Machining Cooling Method Should You Pick?
To limit the chances of mill overheating in CNC processes, different manufacturing techniques have been developed to control the heat produced all while limiting costs. This article will present the most important developments in overheating mitigation for CNC milling.
Cooling with the Cold Gun Aircoolant System and Vortex Tubes
Vortex Tubes are a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. EXAIR has used this vortex tube in the Cold Gun Aircoolant System™ to produce a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. EXAIR's Cold Gun is non-adjustable to prevent freeze-up during use.
Readers Choice 2020: Strategic Approaches for Implementing Automation in Industrial Manufacturing
The adoption of automated systems should be based on a clearheaded commercial and technical analysis to strike the right balance between speed, cost, quality and value.
New Factory Digitization Solution Available on ServiceNow's Now Platform
New Factory Digitization solution modernizes factory operations to enable workers to be more effective and efficient and improve practices with actionable insights
Business is Booming for Oilfield and Refinery Overhauls of Natural Gas Compressors
Although there are varying types of compressors, common reciprocating compressors utilize an electric motor to turn a crankshaft that causes a piston to rise and fall within the cylinder to compress the air or gas. To maximize compression, there must be a tight seal between the piston rings and cylinder bores.
3D Printing Trends 2021: A Year of Radical Renewal
The legacy of 3D printing starts in 2021 with three key trends: going back to the drawing board to rethink manufacturing; enabling the personalization of not only products, but also 3D printers themselves; and creating new solutions, fast.
3D printed satellite deployer in Windform XT 2.0 acclaimed for its mechanical features
Recently Alba Orbital's AlbaPod V2 hyped up for its unique design, lightweight, easily integration into space launch vehicles, maintenance of the demanding quality standards for space. These characteristics have also made possible thanks to the use of AM and Windform XT 2.0 Carbon composite material
RTS Hypervisor: Full support for INtime RTOS
TenAsys and Real-Time Systems team up to greatly improve secure system consolidation and determinism
Desktop Metal Expands Its Production System Lineup With New Printer Designed to Bridge Process Development and Full-scale Metal Parts Mass Production
The New P-1 Joins the Production System P-50 to Offer Single Pass Jetting Technology for Process Development and Serial Production Applications
Skydio and Arris Revolutionize Drone Design and Manufacturing
Silicon Valley innovators accelerate next-gen UAVs fusing AI-powered autonomy with breakthrough composites manufacturing
CoDevelopment: Why Continuously Sharing Design & Manufacturing Data Empowers Electronics Engineers to Innovate Faster
Now, more than ever, there is a greater need to reduce risk for fast-turn, first time right builds, particularly in essential and highly complex businesses such as medical technology, semiconducting, and others where there is a high cost of getting it wrong.
ZVerse Announces Launch of Digital Manufacturing Enablement Platform
A Category-Defining Technology for Digital Manufacturing and OEMs
Bally Ribbon Mills Provides Fully Berry-Compliant Polyester Webbing for Seat Belts, Retractors and Tie-Down Applications
Bally Ribbon Mills, an industry leader in the design, development, and manufacture of highly specialized engineered woven fabrics, announces it has expanded capabilities for producing superior polyester webbing that is fully compliant with the Berry Amendment. This standard requires the Department of Defense to give preference to domestically produced fabrics and clothing. Webbing is available in low minimum runs - as low as 1000 yards per color.
Epolin Visible Opaque Infrared Transmitting Dyes for Thermoplastic
Epolin's Epolight™Â Visible Opaque, Infra-Red Transmitting (VOIRT) dyes
Wilmington Machinery Now Offering a Comprehensive Range of Engineering, Design, and Assembly Services Beyond the Plastics Industry
Wilmington now offers a comprehensive range of engineering, design, and assembly services to include 3D CAD modeling, prototyping, cost-effective fabrication solutions, and contract manufacturing.
Records 6376 to 6390 of 11798
First | Previous | Next | Last
Engineering - Featured Product
FLIR Si1-LD - Industrial Acoustic Imaging Camera for Compressed Air Leak Detection
The FLIR Si1-LD is an easy-to-use acoustic imaging camera for locating and quantifying pressurized leaks in compressed air systems. This lightweight, one-handed camera is designed to help maintenance, manufacturing, and engineering professionals identify air leaks faster than with traditional methods. Built with a carefully constructed array of MEMS microphones for high sensitivity, the Si1-LD produces a precise acoustic image that visually displays ultrasonic information, even in loud, industrial environments. The acoustic image is overlaid in real time on a digital image, allowing you to accurately pinpoint the source of the sound, with onboard analytics which quantify the losses being incurred. The Si1-LD features a plugin that enables you to import acoustic images to FLIR Thermal Studio suite for offline editing, analysis, and advanced report creation. Field analysis and reporting can also be done using the FLIR Acoustic Camera Viewer cloud service. Transferring of images can be managed via memory stick or USB data cable. Through a regular maintenance routine, the FLIR Si1-LD can help facilities reduce their environmental impact and save money on utility bills.
